Rockboard Z-Connector gold

116

Offset Pedal Connector

  • Length (plug to plug): 10 mm
  • Allows for the shortest possible connection of two pedals
  • For pedals with side-mounted, offset sockets
  • Suitable for pedals with side panels at a 90° angle to the floor
  • 6.3 mm Mono jack socket on both sides
In catalogo dal Febbraio 2017
Numero di articolo 404979
Unità incluse 1 Pezzo
Length 1 cm
Colour Gold
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Mostra altro
€ 3,99
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

116 Valutazioni dei clienti

4.6 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

61 Recensioni

e
edo84 08.10.2019
Come per gli altri connettori analoghi certamente si risparmia spazio ma non permettendo gioco, finisce necessariamente per sforzare sulle entrate e uscire jack dei pedali connessi.
Usate i cavi.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
P
Better of the Connectors
PJFord 28.12.2019
Most pedal boards have various different pedals and makes. Joining these together can save you a little space and mess but straight connectors might not work. If you have a few boss pedals in which inputs/outputs are right beside each other than of course the straight connector is a good idea.
The offset connector is great for everything else as it basically adjusts to the height and location of inputs while keeping the pedals close to each other. I use these more now connecting EHX to Boss and more.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
v
ultimate space saver
vedi 10.11.2022
I've bought a couple of these to connect pedals from different manufacturers (e.g. EBS and TC electronic), as the pedals can be different sizes and/or have their inputs/outputs in different places. obviously only works if pedal in/out is on its side ;)

well, for me it works perfectly, the pedals are positioned tightly together and in a straight row, i.e. none of the pedals is considerably higher/lower in the row of the pedalboard. might not work for all pedals out there, so do a little research about pedal dimensions and some the math before buying.

in my particular situation (wanting the pedals strictly straight in one row) I don't think I could have saved any more space between the pedals if they were connected with cables that have flat plugs - two of those plugs next to each other are probably thicker, or just about the same width s this connector, once plugged in.

nota bene, I bought a couple of straight connectors from the same brand, these work great to connect pedals from the same manufacturer.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
NS
Use with caution
Nigel ST 06.11.2017
Quality is good, but use it only with pedals which you don't move or step on too often not to damage the jack input/output. Wouldn't use it for gigging, only at home.
Qualità
0
0
Segnala un abuso

Segnala un abuso