pro snake TPY 2030 JPP

309

Professional Y Cable

  • 2 x 6.3 mm jack mono male to 6.3 mm jack stereo male
  • Black metal connectors with gold-plated contacts
  • Split length: 280 cm
  • Length: 3 m
  • Thomann hook and loop fastener included
In catalogo dal Giugno 2009
Numero di articolo 225453
Unità incluse 1 Pezzo
Length 3 m
Connector 1 Jack 6,3mm TRS male
Connector 2 Jack 6,3mm TS male
Colour Black
€ 6,40
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

309 Valutazioni dei clienti

4.7 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

90 Recensioni

F
ottimo cavo a Y stereo
FilBerti 14.09.2022
ottimo cavo che utilizzo in sala prova per collegare la chitarra direttamente al pa mixer attraverso effetti con uscita stereo e DI box, si è dimostrato robusto e funzionale
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
AD
Useful design quirk
A D 12.07.2020
Normally stereo to twin mono cables are split at the mono end. This one is Y split at the stereo end, which means you get two long mono jack runs without having to peel the cables apart.

I use these for splitting inputs on my edrum module to add extra pads/cymbals, and the long mono runs make it easy to arrange the cabes around the drum rack. I swapped out the straight mono jacks for some right angled jack connectors to allow the cables to exit the drum pads and run straight down to the rack rather than sticking out.

Quality is suprisingly decent. For my uses these are way thicker than needed just to carry the piezo signals to the module, but this should reassure anyone that is needing these for normal audio applications.

A very good buy assuming the split cable suits your needs, otherwise this could be a mild nuisance for you.
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
So far so good
Animale 13.08.2020
Been using these for over 2 years now to split my trigger pad signals into seperate mono zone triggers, and even pedals.

I previously used Hosa...and those performed very good. Years of live gigs and they survived. I think these will have the same durability.

What I would like it to have these with angled jack options.

Although we haven't had the chance to fully perform as we used to due to the China virus, these y-cables have still been dragged around between home, rehearsal studio's and scarce performances.

In operation, I didn't yet notice any difference in operation between this Prosnake TPY and the double so expensive Cordial CFY.

These 2 also look awefully alike.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
KN
Works great
Kristaps N. 08.09.2017
I use this cable to connect my Roland SPD-SX headphone output to my monitor board so i can head the headphone output and monitor the sound.
Also its very useful for using with triggers. The SPD-SX has a stereo trigger in, and I use this cable to split it and connect two triggers to it. Could be a little longer but it works great.
Qualità
1
0
Segnala un abuso

Segnala un abuso