Planet Waves PW-GH-HTS

Moisture Sensor with Humidifier for Acoustic and Steel-String Guitars

  • Very flat temperature and humidity sensor
  • Can be stowed in the case (with clasp system)
  • The humidifier can easily be inserted into the sound hole of the guitar without additional holder and clip (snaps on the strings)
  • Releases moisture to the instrument slowly and evenly
54 Recensioni dei clienti:
  • 5
  • 4
  • 3
  • 2
  • 1
3.8 / 5.0
  • fabbricazione
19 recensioni scritte. Leggi tutte le recensioni
Totale
fabbricazione

Niente di speciale

23.07.2016
Il prodotto nasce con l'obbiettivo di tenere controllati i livelli di umidità degli strumenti acustici, in modo da mantenerli costanti per il bene dei legni.
Il misuratore di umidità e temperatura è abbastanza preciso.
L'umidificatore non è niente di speciale, ma comunque utile.
Utile · Non utile · Segnala un abuso
Invia recensione...

Trovate questa recensione sbagliata oppure per qualche motivo non utile?

Spedisci recensione
gb Traduzione automatica (Mostra originale)
gbRecensione originale (Mostra traduzione)
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
Totale
fabbricazione

Planet waves PW-GH-HTS Humidity sensor & guitar sound hole humidifier

Johnj185, 15.09.2014
A few years ago I bought my first really good acoustic, a Gibson J185 True Vintage, an amazing guitar & pretty expensive & so I decided from the beginning to look after it properly & that meant keeping it humidified during the winter months when the air in the house dries out with the central heating on constantly.
After doing a lot of research and reading some horror stories of certain brands of humidifiers leaking liquid into some very expensive guitars I chose to go with the Planet Waves HPK-01 Humidipak system which is or (was) (not sure) endorsed by Taylor Guitars which was good enough for me.
I found the HPK-01 system to be excellent & was quite frankly amazed at how well it performed, but as time went by some of those horror stories of leaks destroying guitars I'd read began to play on my mind. I must stress that none of these stories involved the Planet waves HPK-01 system & I have never heard of anyone ever having any kind of problem with that product but the HPK-01 does work by suspending a pouch of a liquid gel type substance that absorbs & releases moisture when required in order to maintain a steady relative humidity level inside the sound hole & eventually the worry, unfounded as it probably was ( I'm sure I'm not alone here) became too much & so I needed to look for something else that didn't involve liquid.
I found a lot of products available which utilise sponges to lock in a minimum amount of water making it safely available for humidification but many of them especially some of the snake types had hard parts which could potentially damage the delicate nitro finish of my guitar...
Then I found the Planet Waves PW-GH-HTS system which includes a fairly accurate humidity sensor & a sound hole humidifier which utilises the sponge idea & hangs in your guitar sound hole suspended by the strings with no hard parts coming in contact with your guitars finish.
Used in conjunction with the PW-SIH-01 small instrument humidifier as a replacement for the headstock compartment pouch of the Humidipak system this is a fantastic product, the only downside is you don't have the ability to absorb moisture when the RH gets too high that you have built into the Humidipak system, & obviously you must monitor the humidity & wet the sponge when required, but on the plus side you get 110% peace of mind. No more worrying!
Great product
Utile · Non utile · Segnala un abuso
Invia recensione...

Trovate questa recensione sbagliata oppure per qualche motivo non utile?

Spedisci recensione
€ 43
IVA inclusa, € 20 di spedizione in più
Spedizione gratuita da € 298
Disponibilità immediata
Disponibilità immediata

Questo articolo è disponibile in magazino e può essere spedito a breve.

Informazioni sulla spedizione
Condividi il prodotto
I nostri contatti
Telefono: +49-9546-9223-20
FAX: +49-9546-9223-24
Download gratuito
 
 
 
 
 
Risultati tests:
Le offerte includono il 22% di IVA italiana e sono valide fino ad esaurimento scorte. I costi di trasporto per l´Italia sono di 20 EUR (isole escluse). Per avere maggiori informazioni clicca qui. Non rispondiamo di errori di digitazione o informazioni inadeguate di nessun tipo. *PPC = prezzo al pubblico consigliato dal produttore/distributore in Germania.
Harley Benton Fusion-HSH Roasted Maple Slate Digital ML-2 DPA 4066-OC-A-F10-LH Slate Digital ML-1 JHS Pedals The Bonsai Hercules Stands HCGS-414B+ Guitar Stand Zynaptiq Intensity Sennheiser ew IEM G4 A-Band Sound Devices MixPre-6M Tech 21 DP-3X Harley Benton Fusion-HSH MN Aqua K&M 17650 Guitar Stand
Suggeriti
Harley Benton Fusion-HSH Roasted Maple

Electric Guitar Ergonomically shaped mahogany body, "Ultra Flame" flamed maple veneer top, Matching headstock, Bolt-on neck from "roasted" Canadian flamed maple, "Roasted" maple fretboard, Neck shape: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone...

Al prodotto
€ 399
(2)
Suggeriti
Slate Digital ML-2

Small Diaphragm Condenser Microphone For Slate Digital VRS8 Thunderbolt audio interface, similar linear and flat frequency response to the Slate Digital ML-1, Allows microphone placement that is difficult or impossible for a larger microphone, Side mounted pad switch -...

Al prodotto
€ 159
Suggeriti
DPA 4066-OC-A-F10-LH

DPA 4066-OC-A-F10-LH, d:fine CORE 4066 Omni Headset Mic, professional headset microphone with removable and adjustable neck holder for left or right-sided use. Omnidirectional, 20Hz-20kHz with 3dB boost between 8-20kHz, 144dB SPL max.,TA-4F Switchcraft connector for Shure Transmitter . beige, Great...

Al prodotto
€ 715
Suggeriti
Slate Digital ML-1

Large-diaphragm condenser microphone Neutral ML-1 condenser microphone that can be combined with VMS hardware and software, Optional Neutral VMS preamp ensures minimal sound-colouration (not included!), Via VMS plug-in software, you can completely change the sound characteristics even after recording,...

Al prodotto
€ 859
(1)
Suggeriti
JHS Pedals The Bonsai

Effect Pedal Overdrive, 9 Tube Screamer Overdrive modes, 5 Classic TS circuits and 2 popular mods, Analogue operation, True bypass, Volume, sustain and tone controls, 9-Way rotary control to select between Tube Screamer modes (OD-1 / TS-808 / TS-9...

Al prodotto
€ 259
Suggeriti
Hercules Stands HCGS-414B+ Guitar Stand

Hercules Stands HCGS-414B +, AGS PLUS Guitar Floor Stand for All Electric Guitars / Electric Basses / Acoustic Guitars/Mandolinen/Banjos and Ukulelne, Auto Grab Holder automatically secures the instrument from falling out, (for standard widths of 40-52 mm) with improved foam...

Al prodotto
€ 44
Suggeriti
Zynaptiq Intensity

Zynaptiq Intensity (ESD); enhancer plugin; innovative algorithm increases detail, clarity, density and loudness of any audio signal; suitable for single tracks, groups, mixbus or mastering; easy to us clearly arranged user interface; additional soft-knee saturating limiter at the output stage;...

Al prodotto
€ 151
Suggeriti
Sennheiser ew IEM G4 A-Band

Evolution Wireless In Ear System Consists of UHF bodypack receiver (EK IEM G4), 9.5" transmitter (SR IEM G4) and IE4 earphones, Stereo / focus / mono modes, Up to 1680 frequencies in 42 MHz switching bandwidth, 20 Channel banks...

Al prodotto
€ 999
Suggeriti
Sound Devices MixPre-6M

Portable multitrack audio recorder and USB audio interface Max. of 12 tracks, 6 of them simultaneous, Kashmir microphone preamplifier with 76 db gain, Inherent noise:-128 dBu max. (A-weighted, gain = 76 dB, 150 ohm source impedance), Limiter per channel,...

Al prodotto
€ 959
Suggeriti
Tech 21 DP-3X

Preamp for bass dUg Pinnick signature model, Controls: volume, chunk, high, mid, low, comp, drive, Gain switch, Mix button, Chromatic tuner, XLR DI output, TRS input / output, Headphone output, Dimensions (W x D x H): 19.7 x 6.4...

Al prodotto
€ 299
Suggeriti
Harley Benton Fusion-HSH MN Aqua

Electric Guitar Ergonomically shaped mahogany body, "Ultra Quilted" plywood veneer top, Matching headstock, Bolt-on Canadian Hard Maple neck, Maple fretboard, Neck profile: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone nut, Nut width: 42...

Al prodotto
€ 299
(2)
Suggeriti
K&M 17650 Guitar Stand

Guitar Stand - Carlos Tall A-frame design, Can be folded flat, Support arms include protective felt pads, Suitable for guitars with nitrocellulose lacquer finishes, Neck lock (Security Lock), Colour: Black, Support depth: 125 mm, Dimensions: 410 x 515 mm,...

Al prodotto
€ 68
Feedback Vuoi lasciare il tuo feedback o segnalare un errore?

Non vediamo l'ora di ricevere la tua opinione e di risolvere eventuali problemi nel più breve tempo possibile.

Lascia un commento. Per favore inserisci il tuo indirizzo e-mail.