• Lista acquisti
  • Scegli il paese Select Store
    Tutti i paesi All Countries
  • 0

Le fantastiche guide online di Thomann: Amp modeling

9. Hotdeals

On this page you can find our current Hotdeals on amp modellers.

Preamp. per Chitarra

Boss GT-100
Boss GT-100
Electric Guitar Multi-effect
  • Floor board
  • 400 memory locations (200 User + 200 Preset)
  • 100 dB dynamic range
Boss GT-100, pedaliera multieffetto per chitarra elettrica, floorboard, 400 preset memorizzabili (200 user + 200 preset), 100 dB di dinamica, effetti: compressore, overdrive, distrosione, preamp, EQ, delay, chorus, riverbero, 2 display LCD, 1x ingresso jack, AUX-IN (mini jack stereo), 2x uscite jack (L/R), uscita cuffie, FX-loop, ampcontrol (jack), USB, MIDI in/out, convertitore 24Bit/44,1 kHz A/D, dimensioni: 80 x 542 x 271 mm, peso: 4,8 kg, incl. alimentatore.
€ 409
€ 449
Line6 Helix Guitar Processor
Line6 Helix Guitar Processor
Guitar Processor
  • Next generation dual DSP based HX Modeling Engine with 4 discreet stereo-signal paths
  • 45 Amps, 30 speakers, 16 microphones and 70 effects
  • Imported IRs (impulse responses) with up to 1024 / 2048 samples
Line6 Helix Guitar Processor Guitar Processor Next generation dual DSP based HX Modeling Engine with 4 discreet stereo-signal paths 45 Amps, 30 speakers, 16 microphones and 70 effects Imported IRs (impulse responses) with up to 1024 / 2048 samples 12 Pressure sensitive foot switches for editing The Hands Free Pedal Edit mode sets the effects parameters onto the switch and expression pedal Near-Instant foot switch and controller assignment Up to 3 expression pedals CV/Expression output Amplifier switching output and extensive MIDI control Extensive inputs and outputs for the seamless integration of entire rigs 10 Inputs, 12 outputs (including four FX loops) 8 In / 8 Out USB audio interface AES / EBU, SPDIF and VDI interfaces 123 dB Dynamic range on the guitar input for enormous depth and low noise Robust construction Dimensions (W x D x H): 55.8 x 30 x 8.5 cm Weight: 6.6 kg
€ 1.490
€ 1.637
Line6 Amplifi TT
Line6 Amplifi TT
Guitar Preamp and Interface
  • Usable as a guitar interface, Bluetooth streaming receiver, modelling preamp, as well as a guitar multi-effects device
  • 1 Jack input
  • Controls: Drive, Bass, Mid, Treble & Reverb, Master volume/Blend control
Line6 Amplifi TT Guitar Preamp and Interface Usable as a guitar interface, Bluetooth streaming receiver, modelling preamp, as well as a guitar multi-effects device 1 Jack input Controls: Drive, Bass, Mid, Treble & Reverb, Master volume/Blend control Preset select button Tap Tempo control Outputs: Stereo jack, RCA, optical output, amp out, headphone output USB connector & FBV foot switch connector Supports Apple devices from iOS 7 Dimensions: 9.2 x 16.5 x 25 cm Weight: 4.5 kg Corresponding footswitch: Line6 FBV Express: Article Nr #231417# and Line6 FBV Shortboard: Article Nr #231418# (both are not included)@+*Compatible with AMPLIFi Remote App (Android 4.2 & iOS 7.0):*@+@+ More than 70 modelling amps More than 100 effects More than 20 speakers Up to 8 effects can be used at the same time 100 Onboard presets Remote control for effects parameter Guitar sounds for songs in the music library can be automatically set Share and rate sounds in the Cloud
€ 98
€ 211
Line6 Pod HD500X
Line6 Pod HD500X
Floor Effects Switch
  • Over 100 studio and stomp effects
  • Up to 8 effects simultaneously
  • Free selectable loudspeaker and microphone modeling presets
Line6 Pod HD500X Floor Effects Switch Over 100 studio and stomp effects Up to 8 effects simultaneously Free selectable loudspeaker and microphone modeling presets 512 overwritable storages Dynamic DSP for amps and effects 2 Separate signals Numerous options of routing Professional footswitches with LED rings All necessary inputs and outputs: USB 2.0, MIDI, S/PDIF, symmetrical XLR outputs Internal microphone preamp L6 LINK connector for DT power amps and StageSource loudspeakers VDI connector for James Tyler Variax guitars Configurable expression pedal Looper function (up to 48 seconds of recording) 8 "set list" banks Expression pedal, controlling parameters of amplifying and effects Build in chromatic tuner Tap Tempo footswitch Robust metall chassis Protective chrome roll bar and pressure die cast expression pedal Variable input impedance Editor and librarian software available for download Incl. PX2 power supply
€ 498
€ 544
Line6 Pocket Pod
Line6 Pocket Pod
Preamp for electric guitar
  • 32 Amp models
  • 16 Speaker models
  • 16 Effects
Line6 Pocket Pod Preamp for electric guitar 32 Amp models 16 Speaker models 16 Effects The same sounds as the Pod 2.0 More than 300 presets Built-in chromatic tuner 16 Character display 4 Controls and 4-way navigation button Jack input MP3 Player input (mini jack) Unbalanced output (6.3 mm jack) Headphone output (mini jack) USB output for connecting to a computer and sound editing with the free to download software Powered via 4x AAA batteries (included) or power supply DC-1: Article Nr: #265217# (optionally available) Weight: 180 g Incl. Mini USB cable for connecting to a PC (only MIDI, no audio transmissions!)
€ 95
€ 119
Kemper Profiling Amplifier Rack BK
Kemper Profiling Amplifier Rack BK
19 "Guitar PreampSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+
  • Format: 19 "/ 3 U
  • Dimensions (W x H x D): 48.3 x 13.9 x 22 cm
  • Weight: 5 kg
Kemper Profiling Amplifier Rack BK 19 "Guitar PreampSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+ Format: 19 "/ 3 U Dimensions (W x H x D): 48.3 x 13.9 x 22 cm Weight: 5 kg Colour: Black Mic input Line In Alternative input Direct Out Monitor Out Master Out: TRS S / PDIF digital input and output Midi In / Out / Thru 2x footswitch (jack) Network
€ 1.699
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 6 kg
Kemper Profiling Amp PowerHead Set Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm) Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 6 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic Input Line In Alternative Input Direct Out Monitor Out Master Out (Jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (Jack) Network USB
€ 2.590
Digitech GSP1101
Digitech GSP1101
Guitar Effects Modeling System
  • 19"
  • 1U
  • Over 120 amps-, speakers-, preamps- and effects models, incl. vintage stompboxes and pickup modeling
Digitech GSP1101 Guitar Effects Modeling System 19" 1U Over 120 amps-, speakers-, preamps- and effects models, incl. vintage stompboxes and pickup modeling Stereo effects loop 40 Tones and 40 effects chain libraries - 1600 exclusive DigiTech® combinations Balanced stereo XLR and jack outputs Global EQ Chromatic tuner USB with audio streaming and editor/librarian software MIDI In / Thru Headphone output
€ 349
€ 419,88
Kemper Profiling Amplifier PowerHead
Kemper Profiling Amplifier PowerHead
AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+
  • Powerhead version with 600 watt class D amplifier
  • 600 watts into 8 ohms, 300 watts into 16 ohm
  • Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
Kemper Profiling Amplifier PowerHead AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+ Powerhead version with 600 watt class D amplifier 600 watts into 8 ohms, 300 watts into 16 ohm Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm Weight: 6.5 kg Colour: Black@+*Connections:*@+@+ Mic input Line In Alternative input Direct out Monitor out Master out (Jack & XLR) S / PDIF digital input and output Midi In / Out / Thru 2 x footswitch (jack) Network & USB
€ 2.111
Line6 Sonic Port
Line6 Sonic Port
Audio Interface
  • For Apple iOS devices
  • 1x 6.35mm Guitar input
  • 1x 3.5mm Line in
Line6 Sonic Port Audio Interface For Apple iOS devices 1x 6.35mm Guitar input 1x 3.5mm Line in 1x 3.5mm Headphone output 1x 6.35 mm Line out Incl. iOS Lightning connection cable and iOS 30-pin connection cable
€ 79
€ 97

Preamp. per Chitarra

Kemper Profiling Amplifier Rack BK
Kemper Profiling Amplifier Rack BK
19 "Guitar PreampSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+
  • Format: 19 "/ 3 U
  • Dimensions (W x H x D): 48.3 x 13.9 x 22 cm
  • Weight: 5 kg
Kemper Profiling Amplifier Rack BK 19 "Guitar PreampSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+ Format: 19 "/ 3 U Dimensions (W x H x D): 48.3 x 13.9 x 22 cm Weight: 5 kg Colour: Black Mic input Line In Alternative input Direct Out Monitor Out Master Out: TRS S / PDIF digital input and output Midi In / Out / Thru 2x footswitch (jack) Network
€ 1.699
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 6 kg
Kemper Profiling Amp PowerHead Set Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm) Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 6 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic Input Line In Alternative Input Direct Out Monitor Out Master Out (Jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (Jack) Network USB
€ 2.590
Palmer Pocket Amp Bass
Palmer Pocket Amp Bass
Bass Preamp
  • For practicing, recording and performing
  • For active and passive basses
  • 3 Sound modes: Clean, Overdrive and Fuzz
Palmer Pocket Amp Bass Bass Preamp For practicing, recording and performing For active and passive basses 3 Sound modes: Clean, Overdrive and Fuzz 3-Band equalizer which has been specifically tuned for bass guitar and with semi-parametric mid control Output DI or with speaker emulation Effects loop Controls: Bass, Mid Level, Mid Freq, Highs, Drive, FX Blend, Saturate and Volume Connections: Bass input with pad switch, headphones, AUX In, Bass Thru, XLR DI Out, Amp Out with ground lift, FX insert Aluminium diecast housing Powered with optional 9V battery or 9V DC power supply (e.g., Article Nr #108096# - not included)
€ 148
€ 189
Tech 21 SansAmp RBI
Tech 21 SansAmp RBI
Bass Preamp@+Bass Preamp and Recording Amp - the rack version of Bass Driver D.I. and a little more@+@+@+Like the little brother, the SansAmp RBI provides a vast range of traditional and modern Bassampsounds, including pushing overdrive sounds that you would not expect from a bass preamp. Find several useful presets like SVT®-style, Bassman®-style, Kings X-Style, and Crimson-style (to name just a few) in the RBI's users manual - to get you started immediately.@+@+@+Most of the parameters are identical to those of the SansAmp Bass Driver D.I.:@+@+@+Drive and Presence we need not explain here. Blend allows stepless transition between the dry signal and the SansAmp tube amp emulation. With the active bass and treble controls the respective frequency band can be boost or cut by 12 dB.@+@+@+*Key features of the SansAmp RBI:*@+@+@+The SansAmp RBI has a mid controller and one level pot for the XLR and jack output each in order to provide an optimal signal in parallel to both the bass amplifier on stage as well as the PA system. The integrated effects loop can be toggled between serial and parallel operation with the Mix 50/50 - switch button. The "uneffected" XLR and TRS outputs provide a dry signal for connection to two RBIs or one RBI with another bass amp. Last but not least the footswitch input for remote control of the RBI and the Foot Switch output to hook up multiple RBIs.@+@+@+With the SansAmp RBI you have a whole truck-load of bass-amp-sounds in a single 19" housing. If you are looking for a substantial sound foundation you will no longer need heavy equipment in the future.@+@+
  • In any studio in the world with the RBI in hand luggage you are ready to go on the spot. Enter the console, adjust sound, done!
  • On live events, the SansAmp RBI can be connected to a Bass amp with box (e.g. TECH-21 Bass PowerWedge 60) and the P.A. system in parallel.
Tech 21 SansAmp RBI Bass Preamp@+Bass Preamp and Recording Amp - the rack version of Bass Driver D.I. and a little more@+@+@+Like the little brother, the SansAmp RBI provides a vast range of traditional and modern Bassampsounds, including pushing overdrive sounds that you would not expect from a bass preamp. Find several useful presets like SVT®-style, Bassman®-style, Kings X-Style, and Crimson-style (to name just a few) in the RBI's users manual - to get you started immediately.@+@+@+Most of the parameters are identical to those of the SansAmp Bass Driver D.I.:@+@+@+Drive and Presence we need not explain here. Blend allows stepless transition between the dry signal and the SansAmp tube amp emulation. With the active bass and treble controls the respective frequency band can be boost or cut by 12 dB.@+@+@+*Key features of the SansAmp RBI:*@+@+@+The SansAmp RBI has a mid controller and one level pot for the XLR and jack output each in order to provide an optimal signal in parallel to both the bass amplifier on stage as well as the PA system. The integrated effects loop can be toggled between serial and parallel operation with the Mix 50/50 - switch button. The "uneffected" XLR and TRS outputs provide a dry signal for connection to two RBIs or one RBI with another bass amp. Last but not least the footswitch input for remote control of the RBI and the Foot Switch output to hook up multiple RBIs.@+@+@+With the SansAmp RBI you have a whole truck-load of bass-amp-sounds in a single 19" housing. If you are looking for a substantial sound foundation you will no longer need heavy equipment in the future.@+@+ In any studio in the world with the RBI in hand luggage you are ready to go on the spot. Enter the console, adjust sound, done! On live events, the SansAmp RBI can be connected to a Bass amp with box (e.g. TECH-21 Bass PowerWedge 60) and the P.A. system in parallel.@+For those who need 2 channels: The remote control of the RBI can be coupled with another RBI. Who prefers a programmable preamp should take a look at the SansAmp PSA-1, which was not only developed for the guitar. The PSA-1 already includes 10 pre-programmed Bass presets and 49 additional program slots are available for free assignement.@+@+ Extended rack version of the Bass Driver D.I. Parallel/serial switchable effects loop Adjustable XLR and jack output 19"/ 1U
€ 479
€ 570,01
Kemper Profiling Amplifier PowerHead
Kemper Profiling Amplifier PowerHead
AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+
  • Powerhead version with 600 watt class D amplifier
  • 600 watts into 8 ohms, 300 watts into 16 ohm
  • Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
Kemper Profiling Amplifier PowerHead AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+ Powerhead version with 600 watt class D amplifier 600 watts into 8 ohms, 300 watts into 16 ohm Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm Weight: 6.5 kg Colour: Black@+*Connections:*@+@+ Mic input Line In Alternative input Direct out Monitor out Master out (Jack & XLR) S / PDIF digital input and output Midi In / Out / Thru 2 x footswitch (jack) Network & USB
€ 2.111
Kemper Profiling Amplifier Head WH
Kemper Profiling Amplifier Head WH
Kemper Profiling Amplifier Head WH, the Kemper profiling technology allows you to take a precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such...
€ 1.699
Kemper Profiling Amp Rack BK Set
Kemper Profiling Amp Rack BK Set
Kemper Profiling Amplifier Rack BK + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
  • Weight: 4.5 kg
  • Colour: Black
Kemper Profiling Amp Rack BK Set Kemper Profiling Amplifier Rack BK + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U Weight: 4.5 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic input Line In Alternative input Direct Out Monitor Out Master Out (Jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (jack) Network USB
€ 2.175
Kemper Profiling Amplifier PowerRack
Kemper Profiling Amplifier PowerRack
Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+
  • Power rack version with 600 watt class D amplifier
  • Power: 600 watts into 8 ohms, 300 watts into 16 ohm
  • Format: 19 "/ 3 HE
Kemper Profiling Amplifier PowerRack Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+ Power rack version with 600 watt class D amplifier Power: 600 watts into 8 ohms, 300 watts into 16 ohm Format: 19 "/ 3 HE Dimensions (W x H x D): 48.3 x 13.9 x 22 cm Weight: 6.18 kg Color: Black Mic input Line In Alternative input Direct Out Monitor Out Master Out (jack S / PDIF digital input and output Midi In / Out / Thru 2 x footswitch (jack) Network
€ 2.111
Kemper Profiling Amp PowerRack Set
Kemper Profiling Amp PowerRack Set
Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
  • Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
  • Weight: 5.5 kg
Kemper Profiling Amp PowerRack Set Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm) Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U Weight: 5.5 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic Input Line In Alternative Input Direct Out Monitor Out Master Out (jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (jack) Network USB
€ 2.590
Behringer V-Tone Bass BDI21
Behringer V-Tone Bass BDI21
Behringer V-Tone Bass BDI21 - analog modeling bass pre-amp/stompbox with DI recording output, authentic V-Tone modeling technology capable of dialing up big vintage tube tones, funky slap sounds, crunchy distortions and anything in-between, provides a truckload of great amps in a single stomp box from...
€ 29
€ 36,89

Combo Chitarre a Transistor

Fender Mustang I V.2
Fender Mustang I V.2
Electric Guitar Combo
  • 20 W
  • 1 x 8" Special Fender Design speaker
  • 8 Ohm
Fender Mustang I V.2 Electric Guitar Combo 20 W 1 x 8" Special Fender Design speaker 8 Ohm 1 Channel with 24 presets Controls for Gain - Volume - Treble - Bass - Master - Preset Select - Modulation Speed - Delay/Reverb Select - Save button - Exit button - Tap Tempo button@+*12 Modulation Effects:*@+@+ Chorus Flanger Tremolo Vibratone Octaver Phaser Step filter@+*12 Delay/Reverb Effects:*@+@+ Tape Delay Big Fuzz, Green Screamer and Intelligent Pitch Shifting Stereo/Mono Delay Room/Plate/Hall Reverb USB Built-in tuner AUX input Headphone output (simultaneously speaker emulated line out) Speaker emulated USB output Dimensions (H x W x D): 36.83 x 40 x 19.3 cm Weight: 7.7 kg Incl. Download licenses (internet access required) for Ableton® Live Lite 8 Fender® Edition studio-quality recording software compatible with Mustang USB recording output AmpliTube® Fender® LE edition with free Fender® FUSE editor/librarian software for Mac and PC Optional foot switch available under Article Nr #253297#
€ 125
Fender Mustang III V.2
Fender Mustang III V.2
Electric Guitar Combo
  • Power: 100 W
  • Equipped with 1x12" Celestion G12T-100 speaker with 8 ohm impedance
  • 1 Channel with 100 presets
Fender Mustang III V.2 Electric Guitar Combo Power: 100 W Equipped with 1x12" Celestion G12T-100 speaker with 8 ohm impedance 1 Channel with 100 presets Controls for Gain, Volume, Treble, Middle, Bass, Reverb, Master Wheel for choosing presets/parameters/data wheel Soft keys for amp select Stomp Edit Modulation Edit Delay Edit Reverb Edit New effects - including Big Fuzz, Green Screamer and Intelligent Pitch Shifting Utility Save, Exit and Tap/Tuner AUX Input Headphone output - simultaneously speaker emulated line output Speaker emulated USB output Dimensions (H x W x D): 45.1 x 52.1 x 27.3 cm Weight: 16.3 kg@+*Also includes:*@+@+ Incl. Download licenses (internet access required) for Ableton Live Lite 8 Fender Edition studio-quality recording software - compatible with the Mustang USB recording output AmpliTube Fender LE Edition with free Fender FUSE Editor/Librarian Software for Mac and PC 2-Way foot switch@+*18 Amp models:*@+@+ '57 Deluxe 57 Twin and 60s Thrift '59 Bassman '57 Champ® '65 Deluxe Reverb® '65 Princeton® Reverb '65 Twin Reverb® Super-Sonic™ British '60s British '70s British '80s American '90s Metal 2000@+*7 Stomp effects:*@+@+ Overdrive Fixed Wah Touch Wah, Fuzz, Fuzz Touch Wah Compressor Simple Compressor@+*11 Modulation effects:*@+@+ Sine Chorus Triangle Chorus Sine Flanger Triangle Flanger Vibratone Vintage Tremolo Sine Tremolo Ring Modulator Step filter Phaser Pitch Shifter@+*9 Delay effects:*@+@+ Mono Delay Mono Echo Filter Stereo Echo Filter Multitap Delay Ping Pong Delay Ducking Delay Reverse Delay Tape Delay Stereo Tape Delay@+*10 Reverb effects:*@+@+ Small Hall Large Hall Small Room Large Room Small Plate Large Plate Ambient Arena Fender '63 Spring Reverb Fender '65 Spring Reverb
€ 277
Fender Mustang IV V.2
Fender Mustang IV V.2
Electric Guitar Combo Amp
  • Power: 150 (2x75) Watt stereo
  • 2 x 12" Celestion G12P-80 speakers with 8 Ohm impedance
  • 1 Channel with 100 presets
Fender Mustang IV V.2 Electric Guitar Combo Amp Power: 150 (2x75) Watt stereo 2 x 12" Celestion G12P-80 speakers with 8 Ohm impedance 1 Channel with 100 presets Controls for: Gain, Volume, Treble, Middle, Bass, Reverb, and Master Data wheel Buttons for: Amp Select, Edit Stomp, Modulation Edit, Edit Delay and Reverb Edit Buttons for: Utility, save, exit and Tap/Tuner AUX input Headphones output (simultaneously speaker emulated line out) Speaker emulated USB output Dimensions (HWD): 54.6 x 67.31 x 27.3 cm Weight: 21.3 kg Includes download licenses (internet access required) for Ableton Live Lite 9 Fender Edition studio quality recording software - compatible with USB Mustang Recording Output and AmpliTube Fender LE Edition with Fender FUSEeditor/librarian software for Mac and PC Including 4-Button foot switch@+*12 Amp models:*@+@+ '57 Deluxe '59 Bassman '57 Champ '65 Deluxe Reverb '65 Princeton Reverb '65 Twin Reverb® Super-Sonic British '60s British '70s British '80s American '90s Metal 2000@+*Stomp effects:*@+@+ Big fuzz Green screamer Intelligent pitch shifting Overdrive Fixed wah Touch wah Fuzz Fuzz touch wah Compressor Simple compressor@+*11 Modulation effects:*@+@+ Sine chorus Triangle chorus Sine flanger Triangle flanger Vibratone Vintage tremolo Sine tremolo Ring modulator Step filter Phaser Pitch shifter@+*9 Delay effects:*@+@+ Mono delay Mono echo filter Stereo echo filter Multitap delay Ping pong delay Ducking delay Reverse delay Tape delay Stereo tape delay@+*10 Reverb effects:*@+@+ Small hall Large hall Small room Large room Small plate Large plate Ambient Arena Fender '63 Spring Reverb Fender '65 Spring Reverb
€ 409
Line6 Spider V 60
Line6 Spider V 60
Modelling Combo
  • Power: 60 W
  • Equipped with: 1x 10" Custom full/range loudspeaker & tweeter
  • 200 Amp models
Line6 Spider V 60 Modelling Combo Power: 60 W Equipped with: 1x 10" Custom full/range loudspeaker & tweeter 200 Amp models 128 Presets (incl. Signature Setups & Sounds) Controls: Drive, Bass, Mid, Treble & Volume 1x 6.3 mm jack instrument input 1x Headphone input 1x Stereo aux input Built-in tuner Drum Loops Metronome USB recording & playback Compatible with Line6 FBV3 (Article #380135#) & FBV MKII footswitches (Article #231417# & Article #231418# - both not included) Built-in Line6 Relay G10 receiver (matching Line6 Relay G10 transmitter: Article #398255# (not included) - can be charged via instrument input on amplifier Dimensions: 231 x 442 x 429 mm Weight: 11 kg
€ 298
Line6 Spider V 30
Line6 Spider V 30
Modelling Combo
  • Power: 30 W
  • Equipped with: 1x 8" Custom full/range loudspeaker & tweeter
  • 200+ Amp models
Line6 Spider V 30 Modelling Combo Power: 30 W Equipped with: 1x 8" Custom full/range loudspeaker & tweeter 200+ Amp models 128 Presets (incl. Signature Setups & Sounds) Controls: Drive, Bass, Mid, Treble & Volume 1x 6.3 mm jack instrument input 1x Headphone input 1x Stereo aux input Built-in tuner Drum Loops Metronome USB recording & playback Compatible with Line6 FBV3 (Article #380135#) & FBV MKII footswitches (Article #231417# & Article #231418# - both not included) Dimensions: 208 x 391 x 381 mm Weight: 7.3 kg
€ 198
Line6 Spider V 60 Bundle
Line6 Spider V 60 Bundle
containing:
  • Line6 Spider V 60
  • Line6 Relay G10 Transmitter
  • Harley Benton GC 6 PR
Line6 Spider V 60 Bundle containing: Line6 Spider V 60 Line6 Relay G10 Transmitter Harley Benton GC 6 PR
€ 398
Blackstar ID Core 150
Blackstar ID Core 150
Stereo Modelling Combo
  • Power: 150 watts / 2 x 75 watts
  • Speakers: 2 x 10"
  • 6 Blackstar Voices: Warm Clean, Bright Clean, Crunch, Super Crunch, OD 1 and OD 2
Blackstar ID Core 150 Stereo Modelling Combo Power: 150 watts / 2 x 75 watts Speakers: 2 x 10" 6 Blackstar Voices: Warm Clean, Bright Clean, Crunch, Super Crunch, OD 1 and OD 2 Variable sound spectrum from British to American sounds via the patented ISF controller 12 Typical vintage effects - Modulation: Phaser, Chorus / Flanger, Octaver, Tremolo, Delay: Linear, Analog, Tape, Multi, Reverb: Room, Hall, Spring, Plate Up to 36 sounds can be stored Integrated looper Integrated tuner USB audio interface Aux In Line Out with Speaker Emulation Stereo FX Loop Measurements: 624 x 486 x 259 mm Weight: 14.5 kg Including foot switch@+*Note: free software can be downloaded at http://www.blackstarinsider.co.uk/ - allows for Reamping Mode.*
€ 398
€ 474,81
Fender Mustang II V.2
Fender Mustang II V.2
Electric Guitar Combo
  • Power: 40 W
  • Equipped with: 12" Special Fender Design speaker
  • 8 Ohm
Fender Mustang II V.2 Electric Guitar Combo Power: 40 W Equipped with: 12" Special Fender Design speaker 8 Ohm 1 Channel with 24 presets Controls: Gain, Volume, Treble, Bass, Master, Preset Select, Modulation Speed, Delay/Reverb, Select, Save Button, Exit Button, Tap Tempo Button 12 Modulation Effects: Chorus, Flanger, Tremolo, Vibratone, Octaver, Phaser, Step Filter New effects such as Big Fuzz, Green Screamer and Intelligent Pitch Shifting 12 Delay/Reverb Effects including Tape Delay, Stereo/Mono Delay, Room/Plate/Hall Reverb AUX input Headphone output (simultaneously speaker emulated line out) Speaker emulated USB output Dimensions (H x W x D): 43.8 x 46.4 x 22 cm Weight: 10.9 kg Incl. Download licenses (internet access required) for Ableton Live Lite 8 Fender Edition studio quality recording software - compatible with Mustang USB recording output and AmpliTube Fender LE Edition with Fender FUSE editor/librarian software for Mac and PC Optional foot switch available under Article Nr: #253297# (not included) Optional dust cover available under Article Nr: #265885# (not included)
€ 179
Roland Cube-10GX
Roland Cube-10GX
Guitar Amp
  • Amp modelling: COSM technology
  • Power rating: 10 Watt
  • Equipped with 8" loudspeaker
Roland Cube-10GX, amplificatore per chitarra, 10 watts, 8 "speaker, 3 canali, amp modelling (COSM Technology), 3 amp presets (Clean/Crunch/Lead), 3-band EQ, chorus, delay e reverb (Plate/Spring), uscita cuffie/recording (mini jack), Aux-In, CUBE KIT app per più amp models (Aux-in) gratuita per iOS & Android, dimensioni (h x w x d): 317 x 346 x 179 mm, peso: 4.7 kg
€ 125
€ 139
Roland Cube Street RD
Roland Cube Street RD
Battery powered Combo for Guitar@+@+The ideal amp for road use!@+@+*Firstclass Sound*@+@+Roland CUBE amps are widely known for their striking performance and the CUBE STREET doesn't make an exception. Equipped with two high performance neodymium loudspeakers it delivers unbelievable powerful and rich sound at levels you wouldn't believe possible for such a tiny amp. It conveniently runs up to 15 hours with just 6 AA alkaline batteries or as long as you want using the included power adaptor.@+The CUBE STREET is the perfect amp for busking, a session at the quarry pond, the summertime concert on a lawn, practising on vacation or for warm up just before the gig, for the living room rehearsal or music lessons. This tiny battery powered power pack is a stereo amp with two channels and high class effects for microphones, acoustical and electrical guitars, keyboards and playback devices like mp3 players or drum machines. The CUBE STREET will always be at your side!@+@+*Miniature PA*@+@+The CUBE STREET is guitar amp and miniature PA in one! Thanks to the two channel design a variety of combinations is possible: 2 mics and mp3 player, mic and acoustical guitar, mic and electric guitar, mic and keyboard or two guitars...@+@+
  • 2x 6.5" Neodymium loudspeaker
  • Power rating: 2x 2.5 W
  • 2 Channels
Roland Cube Street Red- amplificatore chitarra con batterie - 2x speakers da 6.5" al deodynium, 2x 2.5W, 2 canali. Canale 1: commutabile tra mic/line (combinazione XLR/jack) con EQ 2 bande, riverbero/delay. Canale 2: commutabile tra mic/line/chitarra acustica/chitarra elettrica, 5 modelli di amplificatori per chitarre elettriche (JC-120, Fender Twin, Vox AC-30, Marshall Stack, Rectifier), EQ 3 bande, 6 effetti DSP (chorus, flanger, phaser, tremolo, delay, reverb). Accordatore cromatico, aux in stereo (mini-jack) per lettori mp3, Cuffia out (jack 1/4"), funziona con 6x batterie AA (OPZIONALI) o via un alimentatore 9V (incluso). Dimensioni: 41.5 x 25 x 29.5cm. Peso: 5.2kg. Colore: Rosso
€ 298
€ 329

Testate Chitarre Modelling

Kemper Profiling Amplifier Head WH
Kemper Profiling Amplifier Head WH
Kemper Profiling Amplifier Head WH, the Kemper profiling technology allows you to take a precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such...
€ 1.699
Line6 Spider V 240 Head
Line6 Spider V 240 Head
Line6 Spider V 240 Head, head for e-guitar, 240 watts, 2 x 4" speakers and 2 tweeters for stand-alone practicing (50-watts), 128 presets, wireless-ready for Line 6 Relay transmitters, XLR direct outputs for live use, built-in 60-second looper, over 200 amps effects and cabs, USB...
€ 498
€ 546
Kemper Profiling Amp Head BK Set
Kemper Profiling Amp Head BK Set
Kemper Profiling Amplifier Head BK + Remote Control@+The Kemper Profiling Technology allows you to create precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such as multiple stomp effect emulations (up to 4 simultaneously), master effects, equalizer, gain, amp definition, power sagging etc. The Kemper Profiling Amplifier is already delivered with several painstaking amp profiles on board so you don't necessarily have to make your own profiles. For the first time it is now possible to take a precise snapshot of your own amplifier sound, modify it (if desired) and use it for practice in the studio or on stage without carrying heavy equipment.@+@+
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 5.4 kg
  • Colour: Black
Kemper Profiling Amp Head BK Set Kemper Profiling Amplifier Head BK + Remote Control@+The Kemper Profiling Technology allows you to create precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such as multiple stomp effect emulations (up to 4 simultaneously), master effects, equalizer, gain, amp definition, power sagging etc. The Kemper Profiling Amplifier is already delivered with several painstaking amp profiles on board so you don't necessarily have to make your own profiles. For the first time it is now possible to take a precise snapshot of your own amplifier sound, modify it (if desired) and use it for practice in the studio or on stage without carrying heavy equipment.@+@+ Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 5.4 kg Colour: Black Incl. Remote Control base board@+*Connections:*@+@+ Mic input Line in Alternative input Direct Out Monitor Out Master Out (jack and XLR) S / PDIF digital input and output MIDI In/Out/Thru 2 x Foot switches (jack) Network USB
€ 2.175
Kemper Profiling Amp Head WH Set
Kemper Profiling Amp Head WH Set
Kemper Profiling Amplifier Head WH + Remote Control, the Kemper profiling technology allows you to take a precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the...
€ 2.175
Kemper Profiling Amplifier BK Set
Kemper Profiling Amplifier BK Set
containing:
  • Thon Amp Case Kemper Profiling Amp
  • Kemper Profiling Amplifier Head BK
  • Wizoo Publishing Kemper Profiler Guide
Kemper Profiling Amplifier BK Set containing: Thon Amp Case Kemper Profiling Amp Kemper Profiling Amplifier Head BK Wizoo Publishing Kemper Profiler Guide
€ 1.750
Positive Grid Bias Head Powered
Positive Grid Bias Head Powered
Positive Grid Bias Head, electric guitar amplifier head, Amp Match lets you capture or download any tube amp tone for use with the BIAS Head Processor, Amp Design lets you design your custom dream amp and sync unique presets in real time, ToneCloud for sharing...
€ 1.419
Yamaha THR 100H Dual
Yamaha THR 100H Dual
Head amp for electric guitar
  • Dual version of the THR 100 - two completely independent amps in one housing
  • Single amp power : 100 W to 8/16 ohm or 50 W to 4 ohm
  • Dual amp power: 100 W (50 W + 50 W)
Yamaha THR 100H Dual Head amp for electric guitar Dual version of the THR 100 - two completely independent amps in one housing Single amp power : 100 W to 8/16 ohm or 50 W to 4 ohm Dual amp power: 100 W (50 W + 50 W) Class D power amp Amplifier types per amp: Solid, Clean, Crunch, Lead and Modern Emulated tube types per amp: EL34, 6L6GC, KT88, EL84 & 6V6 Effects: 2x Booster, 2x Reverb, Noise Gate FX Loop and Speaker Simulation 2 Instrument inputs: 6.3 mm jack Controls per amp: Amp Type, Booster, Gain, Master, Bass, Middle, Treble, Presence, Reverb & Level Rear panel controls / switches: 2x Class A / AB, ground lift, impedance selection: 4/8/16 Ohm and power output: 25/50 / 100W Headphone jack: 3.5 mm mini-jack Foot switch connection FX loop 2 Speaker connections and 2 XLR line outputs Dimensions (W x H x D): 445 x 248 x 125 mm Weight: 4.2 kg Incl. foot switch and power supply Optionally available carrying bag: #399063# (not included)
€ 865
€ 986
Line6 DT25 Head
Line6 DT25 Head
Electric Guitar Amp Head
  • Power: 25 W (10 W)
  • Line6 HD modeling
  • Preamp tubes: 1x 12AX7
Line6 DT25 Head Electric Guitar Amp Head Power: 25 W (10 W) Line6 HD modeling Preamp tubes: 1x 12AX7 Power tubes: 2x EL84 Voicing and bias types adjustable: cathode or "fixed" Type I (California Clean) Type II (Crunchy British Feel) Type III (Chimney Brit Feel) Type IV (Higher Gain) Compatible footswitch: POD HD3/4/500 via L6 LINK to manage the amp settings and any standard two-button footswitch for channel selection (both not included)
€ 698
€ 762
DV Mark Multiamp Mono
DV Mark Multiamp Mono
Head amp for electric guitar
  • Combination of preamp, effects processor and power amp
  • Analog mono power amp
  • Power: 250 W at 4 ohms
DV Mark Multiamp Mono Head amp for electric guitar Combination of preamp, effects processor and power amp Analog mono power amp Power: 250 W at 4 ohms 3 Channels: Clean, Crunch, Lead Controls for gain, presence, level and master EQ with controls for bass, mids and treble MIDI input and output Virtual simulation for amps speakers and microphones Multi-effects processor SD card slot Mono input: Jack 2 Mono outputs: XLR / Jack Lightweight design Weight: 4.3 kg Format: 19" / 2U Installation depth: 324 mm Incl. adapter for rack mounting
€ 999
€ 1.149
DV Mark Multiamp
DV Mark Multiamp
Head amp for electric guitar
  • Combination of preamp effects processor and power amp
  • Power amp: 2x 150 W @ 8 Ohm or 2 x 250 W @ 4 Ohm or 500 W @ 8 Ohm (bridged)
  • 3 channels: Clean, Crunch, Lead
DV Mark Multiamp 2.1 Head amp for electric guitar Combination of preamp effects processor and power amp Power amp: 2x 150 W @ 8 Ohm or 2 x 250 W @ 4 Ohm or 500 W @ 8 Ohm (bridged) 3 channels: Clean, Crunch, Lead Controls for Gain, Presence, Level, and Master EQ with controls for bass, mids and treble MIDI In / Out Virtual simulation for amp speakers and microphones Multi-effects processor SD card slot Mono input: 6.3 mm jack 2 mono outputs: XLR / 6.3 mm jack Format: 19" / 2U Weight: 4,3 kg Incl. adapter for rack mounting and a transport bag
€ 1.318
€ 1.499

Combo Modelling per Basso

Roland Micro Cube Bass RX
Roland Micro Cube Bass RX
Roland Micro Cube Bass RX Amplificatore per Basso - 2x 2.5W (stereo), speakers 4x 4", chorus JC-120 , riverbero stereo, uscita stereo line/microfono, 6x modelli di amplificatori (Ampeg B-15 combo, Fender Bassman, Trace Elliot stack, Acoustic 360, SWR stack and Ampeg stack), preamp di microfono,...
€ 255
€ 285
Fender Bronco 40
Fender Bronco 40
Fender Bronco 40 bass combo, modeling, 40 watt, 1x10" fender special design speaker, 1 channel with 24 presets, 8 amp models (Rumple, 59 Bassman, Bassman TV, Bassman 300, Redhead, Rockin Peg, KGB800, Monster), control for Gain,Bass,Mid,Treble,Master,Preset,FX,Compression,Save Button, Exit Button, Tap Temp Button, integradet effects: Overdrive,...
€ 285
Roland Cube 20XL Bass
Roland Cube 20XL Bass
Roland Cube-20XL Bass, amplificatore per basso, combo con modelli di amplificatori, 20 watts con speaker da 8", suono profondo, potente e chiaro, tecnologia digitale FFP, 6 modelli di amplificatori provenienti da famosi amplificatori per basso, 7 effetti incl. Poly Octave, accordatore per basso integrato (cromatico...
€ 263
€ 285
Roland Cube-60XL Bass
Roland Cube-60XL Bass
Roland Cube-60XL Bass, amplificatore per basso, combo con modelli di amplificatori, 60 watts con speaker da 10", suono profondo, potente e chiaro, AIR FLOW bassreflex, modello SUPER LOW, tecnologia digitale FFP, looper di 80 secondi, suono Solo con possibilità di memorizzazione, 8 modelli di amplificatori...
€ 485
€ 539
Roland Cube 120XL Bass
Roland Cube 120XL Bass
Roland Cube-120XL Bass, amplificatore per basso, 120 watts, speaker 12", suono profondo, potente e chiaro, AIR FLOW bassreflex, modalità SUPER LOW, tecnologia digitale FFP, looper di 80 secondi, funzione SOLO con possibilità di salvataggio, 8 modelli di amplificatori COSM, 7 effetti incl. Poly Octave, accordatore...
€ 615
€ 659
Fender Bronco 40 Bundle
Fender Bronco 40 Bundle
containing:
  • Fender Bronco 40
  • Thomann Cover Fender Bronco 40
Fender Bronco 40 Bundle containing: Fender Bronco 40 Thomann Cover Fender Bronco 40
€ 314

Testate per Basso a Transistor

Markbass Bass Multiamp Stereo
Markbass Bass Multiamp Stereo
Amp Head for Electric Bass
  • Stereo output stage with 2 x 500 W at 4 Ohm or 1000 W mono at 8 Ohm
  • Digital stereo preamp
  • 3 Channels
Markbass Bass Multiamp Stereo Amp Head for Electric Bass Stereo output stage with 2 x 500 W at 4 Ohm or 1000 W mono at 8 Ohm Digital stereo preamp 3 Channels Controls for gain, presence, level and master 3 Band EQ with controls for bass, mids and treble 12 Amp simulations Virtual Speaker Cabs and Microphones Over 300 factory presets 8 Assignable slots per preset 15 Effects Tap Tempo function 3 Output Modes Chromatic tuner MIDI-enabled Slot for SD card Headphone output Effect path Light weight (4.3 kg) Rack format (2U) Includes mounting bracket for rack mounting
€ 1.299
€ 1.525
Markbass Bass Multiamp Mono
Markbass Bass Multiamp Mono
Mark Bass Multiamp mono amp, head for bass guitar, mono amplifier 500 watts at 4 ohms, digital stereo preamp, 3 channels, controls for gain - presence - level - master, 3 band EQ with controls for bass - mid - treble, 12 amp simulations, 8...
€ 1.075
€ 1.399
I nostri contatti
Telefono: +49-9546-9223-20
FAX: +49-9546-9223-24
Nuovo negli Hot Deals
Le vostre opinioni
Spedizione arrivata alla data prestabilita, imballo perfetto e veloci nel gestire l'ordine! Grazie al prossimo acquisto!
erxx.lexxx5@gmxxx.com, 15.02.2017

Amp modeling panoramica

(1)
(2)
(12)
(1)
Feedback

Vuoi lasciare il tuo feedback o segnalare un errore?

Non vediamo l'ora di ricevere la tua opinione e di risolvere eventuali problemi nel più breve tempo possibile.

cancella