Magma CTRL Case SP-404MK2

10

Controller Case

  • Sitable for Roland SP-404MKII, SP-404SX, SP-404A, Soundswitch Control One or samplers of similar size
  • 5 mm EVA Durashock hard foam and water-repellent 600D polyester outer material
  • Robust zipper
  • Knobby foam to protect pads, knobs and buttons
  • Mesh pocket for accessories
  • Compatible with Decksaver
  • Outer dimensions (L x W x H): 330 x 190 x 80 mm
  • Inner dimensions (L x W x H): 320 x 170 x 70 mm
  • Weight: 0.45 kg
  • Colour: Black
In catalogo dal Gennaio 2023
Numero di articolo 559278
Unità incluse 1 Pezzo
€ 44
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

10 Valutazioni dei clienti

4.9 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

manipolazione

Qualità

7 Recensioni

[K
Una Garanzia
[KH] Kappa Acca 01.03.2024
Lo utilizzo con SP404 mkII; è semplicemente perfetto: le misure consentono di maneggiare con comodità il sampler, permettendo inoltre di inserire l'alimentatore ed eventuali cavi; la struttura è rigida ma allo stesso tempo è leggerissima, dà una sensazione di robustezza e solidità che durano nel tempo e anche alle peggiori condizioni di trasporto.
manipolazione
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Very impressive quality
Artemiy 05.06.2023
I have tried cases from three different manufacturers, and quality-wise this one is absolutely the best! I needed a case that would fit both an SP-404 mkII or a Digitakt if needed, and this one is just perfect. The zipper line is super thick and feels very very reliable. The way the cables are securely isolated from the main devices with a net and a foam padding is excellent design - you will never end up with scratched sides or front panel. Love this one. Will probably buy a few more from this brand.
manipolazione
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
jc
A Perfect Fit
jason c 10.05.2023
If your looking for a case to look after your C1 - then this should be on your list.
Room for USB, DMX Cable & Saver.
Highly Recommended
manipolazione
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate fr
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
L
bien mais pas parfait
Luxtone 01.08.2023
Rien a dire sur la qualité de fabrication.
Par contre j'ai 2 remarques :
- pourquoi cet espace supplémentaire??? pour l'alimentation? Pour une prise Française en tout cas ça ferme pas ou alors en forçant vraiment. Du coup cet espace est inutile et rend juste la case beaucoup trop longe. Dans un sac a dos ça prend presque toute la place. La poche supérieure suffit amplement pour mettre l’alimentation et des câbles. Je préfère la case pour les anciens SP404 par rapport à ça.
- La mousse c'est bien mais j'aurai aimé une découpe pour les 4 potards du SP404. Honnêtement ça met une pression sur les potards quand on la ferme ça fait un peu flipper. Peut être avec le temps ça va se tasser. En tout cas on est un peu obligé de la laisser sinon tout ce qui est dans la poche se barre..... Bref pour ce prix j'aurai bien aimé avoir une case un peu plus sur mesure. Mais bon y a rien d'autre.....donc c'est deja bien :)
manipolazione
Qualità
0
0
Segnala un abuso

Segnala un abuso