LD Systems Wheelboard f. Maui 28
- 100 mm blue wheels, 2x with brakes and 2x without brakes
- Suitable for Maui 28
Se ha urgenza di ricevere questo articolo la consigliamo di contattarci per maggiori informazioni riguardo la data indicativa di consegna del fornitore.Informazioni sulla spedizione
1–2 su 21 feedback scrittiLeggi tutte le recensioni
Sturdy but quite fiddly to assemble
However, I experienced a few issues with the assembly and the quality of the bolts supplied with this product. The four castor units are supplied unattached and need to be bolted onto the board.
a) There are no instructions supplied. You might not think this is a problem but as I discovered there is a derfinite 'front' and 'back' to the board which is obvious once you load the Maui sub onto it. Not obvious when you start to attach the wheels, two of which have brakes. I suggest checking the product photograph from the website carefully before you begin.
b) The supplied bolts do not have 'slots' on the top to hold them firmly and stop them spinning when the bolts are being tightened on the underside. Several of my bolts would not tighten properly and it took quite some time to fix all four wheels securely.
c) The lengths of the bolts are too long. Once the bolts holding the 'braked' wheels were properly tightened they protruded so far on the underside of the board that they actually stopped the wheels from turning in a complete circle, in other words completely inhibiting the free movement of the board. I eventually had to saw off the bottom of 5 of the bolts!! I would certainly not have expected to do this for what is quite an expensive piece of equipment given that it is just a castor board!
Overall, it is good once assembled but I feel it would benefit from a better quality set of bolts (slotted and shorter!) and a set of instructions to make it clear which castors should be fitted where.
Built like a tank so you do not need a fresh one for the decades to come.Yes!
Wheel board 100 mm blue wheels, 2x with brakes and 2x without brakes, Suitable for Maui 28
Wheel Board Never drag heavy racks across the stage again with the Thon Castor Board (the vernacular "dog" says) save yourself back pain and time. Including 2 braked and 2 unbraked rollers, 4x...
Wheel Board with Brakes
Caster board suitable for Thon Multiflex module racks Save yourself back pain and time and never again drag heavy racks across the stage with the Thon caster board. Made of 18 mm birch plywood,...
Wheel Board Never drag heavy racks across the stage again with the Thon Wheel Board save yourself back pain and time. 4x 100 mm wheels, blue unrestrained, Sheet steel housing, Zinc chromate,...
Castor Board for guitar stacks With 4x 100 mm wheels (including 2 braked and 2 unbraked wheels), Placement height (top of the wooden platform): 140 mm, Dimensions: 36 x 76 x 15 mm, For 4x12...
Caster board Suitable for the LD DAVE15 G3, Dimensions without wheels: 480 x 632 mm, Height of the casters: 80 mm, Incl. lashing belt
Roll Board for Live Stacking Racks Fitting roll board for all Thon stacking racks, 18 mm Birch plywood, Black lacquer finish, Height: 146 mm, Dimensions: 53 x 57.5 cm, Inset slots for ease of...
Wheel Board Suitable for the Maui 44 system, Including 2 braked and 2 unbraked 100 mm blue wheels, Dimensions (W x D): 620 x 615 mm
Wheel Board For LD DAVE10 G3, Dimensions without wheels (LxWxH): 465 x 345 x 18 mm, Roll height: 80 mm, Incl. strap
LD Systems Wheelboard for Dave 18 G3, wheelboard for LD DAVE 18 G3 incl. strap, dimensions without wheels: 510 x 725 mm, Diameter of wheels 80 mm
Caster board made of extra hard polyethylene Hardcases can easily be stacked on top of each other, Max. load bearing capacity: 150 kg, Incl. wheels with brakes, Incl. webbing strap
QSC KLA181 caster kit, Fits the QSC E 15, KLA181, The wheels are fitted to the rear of the cabinet with the already fitted T Nuts, 4 Wheels per set
|Unitá vendute||1 Pezzo|
|In catalogo dal||maggio 2012|
|Livello di vendita|
|in questa categoria||Classifica 52|
|su thomann.de||Classifica 18550|
- LD Systems Ruote Rack/Custodie in mostra
- Mostra Ruote Rack/Custodie nella gamma di prezzo 70 € - 90 €
- Vai al gruppo del prodotto Accessori per Altoparlanti
- Vai al gruppo del prodotto Ruote Rack/Custodie
- Vai al gruppo del prodotto Accessori Custodie e Rack
- Vai al gruppo del prodotto Custodie, Racks e Borse
- Mostra le informazioni del produttore per LD Systems
- LD Systems Custodie, Racks e Borse in generale
- Vai alla versione stampabile della pagina