Doepfer A-183-3 - DC amplifier.
1–2 su 4 feedback scrittiLeggi tutte le recensioni
Gainstage for your modular
Gainstages are still MUCH underrated in modularland.
patch your envelope thru it to clip it and thus get a hold stage.
patch first thru a gainstage to go with hot levels into your filter,
probably getting the expected love out of those filters you just didn´t so far.
make them saturate.
patch after ring modulators to get back a hot signal.
use it after filtering out a signal, for example by highpass filtering it, to get that filtered out sound back to a level.
the doepfer a 183-3 has a good sound in my opinion. can´t complain
Doepfer quality, does what it suppoes to do
Doepfer A-183-3 - DC amplifier.
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Wasp Filter Special edition, Black front, Yellow knobs
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
Doepfer A-119 - external input/envelope follower; Width: 8HP / 40.3 mm; Depth: 45 mm (measured from the rear side of the front panel); Current: +30mA (+12V) / -20mA (-12V)
Module Dual linear/exponential, VCA
Doepfer A-199 Spring Reverb Module - electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical...
Doepfer A-138b - mixer with logarithmic potentiometers.
Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm
Doepfer A-147-2 VCD LFO Module, Voltage Controlled Delayed Low Frequency Oscillator, Module contains VCLFO: voltage controlled low frequency oscillator, VCA: voltage controlled amplifier, switchable...
Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...
LFO Modulation Generator The module A-145 (LFO) is a low frequency oscillator, which generates periodic control signals in a wide frequency range. Five wave forms are available: saw tooth, inverted...
Doepfer A-143-2 Quad ADSR - 4x independent ADSR-type envelope generators.
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Doepfer A-131 VCA - voltage controlled amplifier (logarithmic).
Doepfer A-111-3; Micro Precision VCO / VCLFO; Width: 4 HP, Current: +40mA (+12V) / -40mA (-12V)
Doepfer A-110-4 Thru Zero Quadrature - VCO oscillator generates sine and cosine waveforms at the same time. These are terminated as soon as the linear control voltage reaches 0V. Special edition...
|Unitá vendute||1 Pezzo|
|In catalogo dal||dicembre 2009|
|Livello di vendita|
|in questa categoria||Classifica 260|
|su thomann.de||Classifica 45536|