Quad Sequential Switch
1–2 su 7 feedback scrittiLeggi tutte le recensioni
"So what?", you may be thinking...
The awesome power of switches becomes apparent when you get your hands on one and start patching. Some ideas:
Put 4 different audio rate oscillator waveshapes to the four inputs and advance the steps at audio rate, you now have a nice complex wave coming out.
Put 4 constant cvs to the inputs and you have an up to 4 step cv sequencer, great for arpeggios when the ouput is mixed with a v/oct signal and sent to an oscillator.
Send multiple clocks to the 4 inputs, stepping through rhythmically, and send the output to some logic - incredibly complex drum patterns abound.
Send clock to input one and mult it to the step advance, leave inputs 2-4 empty - now you have a clock divider, division selected by the number of inputs switch!
Take your single synth input and send to four different fx configurations, step through them for each section of your song structure (verse/chorus/bridge etc) - switches are amazing for creating complex song structures that you just couldn't do without them.
And this all just with one 4 step switch - add another and the possibilities increase exponentially. Add its bigger brother, the a152 (which is 8 channel and addressed, so can pick the steps sequentially but also ad hoc as needed via cv) and its just insane how much you can do with it. Switches are a must have for complex patching, and you cant go wrong with doepfer for the price vs power vs quality.
awesome and versatile
I mostly use this for transposing sequences using a divided down clock signal to shift a sequence making an eight note sequence into 32. I also have set it up for sequencer ratcheting using various clock signals to add interest and rhythm to a simple sequence. Being able to choose whether you use 2, 3 or 4 steps also adds complexity. I often use this switch as a performance control. Audio signals come through clean and clear. It'll happily run at audio frequencies to make interesting wave forms and it has the all important LEDs to let you know what it's doing.
This module is neat small and inexpensive - lots squeezed into 4HP.
Quad Sequential Switch
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Wasp Filter Special edition, Black front, Yellow knobs
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Mixer ModuleModule A-138 is a four-channel mixer that can be used for mixing control voltages as well as for mixing audio signals. A separate attenuator is available for each of the four inputs. In...
Doepfer A-100 LC1 Low Cost Case for Eurorack Modules; build-in Power Supply A-100SSB (+12V/380 mA, -12V/380mA); 48 TE Version of the A-100LC3; build-in Bus Board with 8 Module connectors; Housing...
Quad ADSRThe module contains 4 independent ADSR envelope generators. Each sub-module has the controls Attack, Decay, Sustain and Release. With the 3-stage range switch, the desired time range can be...
Module Dual linear/exponential, VCA
Spring Reverb ModuleDoepfer A-199 is a spring reverb module, which electronically simulates the reverb effect with the aid of spiral springs. Spring reverb systems have a characteristic sound...
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...
VCA (Voltage Controlled Amplifier)The A-131 module is a voltage-controlled amplifier. An exponential VCA (A-131) is usually used for audio applications, while a linear VCA (A-130) is used for...
Wasp Filter Module A-124 is a special 12 dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies,...
Doepfer A-157 Trigger Sequencer Subsystem 1-2-3, contains: A-157-1 Trigger Matrix (8x16) + A-157-2 Output Module and A-157-3 Input Module, generate up to eight trigger signals controlled by a 8x16...
Basic VCO for the A-100 modular system Voltage controlled oscillator, 3-Position toggle switch, Linear FM input and soft-sync input, Tune control range can be set between approx. 1/2 octave and 4...
Analog and Trigger Sequencer for Modular System A-100 The following functions are available for the two analog rows (rotary knobs): 8 Rotary potentiometers, Scale (stepless knob) on the lower...
LFO Modulation Generator The module A-145 (LFO) is a low frequency oscillator, which generates periodic control signals in a wide frequency range. Five wave forms are available: saw tooth, inverted...
|Unitá vendute||1 Pezzo|
|In catalogo dal||maggio 2007|
|Livello di vendita|
|in questa categoria||Classifica 119|
|su thomann.de||Classifica 29965|
- Doepfer Sistemi Modulari in mostra
- Mostra Sistemi Modulari nella gamma di prezzo 60 € - 80 €
- Vai al gruppo del prodotto Sistemi Modulari
- Vai al gruppo del prodotto Synth
- Vai al gruppo del prodotto Tastiere
- Mostra le informazioni del produttore per Doepfer
- Doepfer Tastiere in generale
- Vai alla versione stampabile della pagina