Doepfer A-120 Vintage Edition

10

24 dB Low Pass 1 (VCF1)

Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off frequency (corner frequency) determines the point at which this effect occurs. They can be set or modulated both manually and via control voltages (filter modulation, with an LFO for example).

The VCF1 is configured as a "transistor cascade" with an edge slope of -24 dB / octave, which is also used in various Moog synthesisers, This results in the typical, "legendary" Moog sound. The resonance (emphasis) can be adjusted at the VCF 1 up to self-oscillation. In this case, the filter operates as a sinusoidal oscillator.

  • Vintage edition with black front panel
  • Voltage-controlled 24 dB low-pass filter
  • Black front panel
  • Width: 8TE / 40.3 mm
  • Depth: 65 mm (measured from the back of the front panel)
  • Power requirements: 30mA (12V) / -20mA (-12V)
In catalogo dal Marzo 2016
Numero di articolo 383620
Unitá incluse 1 Pezzo
Width 8 TE / HP
€ 130
Spedizione gratuita, incl. IVA
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

10 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

uso

Caratteristiche

Suono

Qualità

8 Recensioni

A
Indispensabile
Anonimo 18.02.2016
Filtro Low Pass da 24 db, come il leggendario filtro della Moog. A mio avviso questo della Doepfer riproduce abbastanza l'originale e suona benissimo. Difficile pensare un Synth senza questo filtro!
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
EL
Moog ladder in Eurorack
Earl Langoustine 28.01.2021
This module gives you the classic Moog filter sound in Doepfer's 8hp format. If you've used one of the other Doepfer filter clones, you'll already have an idea of what this module is like. Of the three CV inputs, one tracks volt-per-octave and the other two come with attenuation. Resonance sounds very smooth and not piercing, as you would expect from this filter design, and also has input gain which seems to drive it. Pairs nicely within a larger Moog-style system - such as preceding this module with a CP3 mixer clone.

Important to note that these Doepfer filters are quite deep and will not fit in all skiffs (such as the Intellijel palette case). But on the positive, the currently listed specs above are wrong and the module is only around 55 mm deep (not the 65 mm listed above, the correct measurement is on Modulargrid).
uso
Caratteristiche
Suono
Qualità
3
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
H
Get it
Hermanator 13.07.2021
I bought most of the Doepfer filter modules, and this is by-far my favorite. I didn't think that I'd like the bass response dropping off as resonance was increased, but I LOVE IT. I feel like this actually defines this filter. The adjustable sonic range on this is huge, when controlling level & resonance. I liked moog filters on softsynths & digital synths, but I LOVE this filter & authentic moog filters. There's a night & day difference between this & a digital emulation. It must be the way all of the transistors interact with one another as the resonance, level, and frequency is changed. Many digital emulations don't account for all of these minute differences. This thing really delivers. My only complaint, if any, are the knobs are a bit rough (hard on the hands to twist a lot). I'm tempted to replace them with a more comfortable knob, but I'd lose the classic look.
uso
Caratteristiche
Suono
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate de
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Sauberer Filter und Sinus Osc
Anonimo 29.08.2016
Der A-120 gehört eher nicht zu den extremen Filtern, sondern ist ein sauber arbeitender Lowpass Filter mit Moog Charakter. Die Resonanz klingelt und blubbert angenehm, auch Selbstresonanz ist mit dem A-120 möglich. Praktisch sind die drei CV Eingänge, wobei CV1 den Filter als Sinus-Oszillator bespielbar macht, CV2 und 3 verfügen über einen Abschwächer und dienen zum Patchen von Hüllkurven u.ä. Insgesamt ein gutes sauberes Filter, das sich bei Selbstoszillation auch zur FM eignet. Die Vintage Optik des A-120v geht in Ordnung, die schmalen Knöpfe lassen Platz für die Finger, sehen aber für meinen Geschmack nicht ganz so toll aus.
0
0
Segnala un abuso

Segnala un abuso