VCA (Voltage Controlled Amplifier)The A-131 module is a voltage-controlled amplifier. An exponential VCA (A-131) is usually used for audio applications, while a linear VCA (A-130) is used for control applications. However, this is not a compulsory requirement.
The gain of the VCA determines the control voltages at the CV inputs and the position of the gain controller, which is used to adjust the basic gain of the VCA. Each VCA has two audio inputs with pre-attenuated attenuators whose sum mix is ââamplified according to the control voltages and the position of the gain control.
1–2 su 7 feedback scrittiLeggi tutte le recensioni
well fitted yet cheap VCA
This VCA features two separated CV inputs, the second one having its own reducer.
it also offers two individual audio inputs, each of them being fitter with an attenuator
you cannot see it as two independant VCAs tought but it definitely offers more than just one simple VCA, which is nice considering it entry level price point !
in terms of sound quality not much to say there. pretty good.
Excellent straight forward VCA
I would recommend this module for anyone starting a Eurorack because it's (a) priced very reasonably (b) you get a good understanding of signal flow, which, is a good thing to have when looking for possibly more exotic/pricey modules in future - and (c) the quality is outstanding as both the input jacks and potentiometers won't wear out anytime soon (going by some of the other Doepfer modules I have).
Last but not least; delivery to the UK only took 4 working days - good stuff all round!
VCA (Voltage Controlled Amplifier)The A-131 module is a voltage-controlled amplifier. An exponential VCA (A-131) is usually used for audio applications, while a linear VCA (A-130) is used for...
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Wasp Filter Special edition, Black front, Yellow knobs
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Mixer ModuleModule A-138 is a four-channel mixer that can be used for mixing control voltages as well as for mixing audio signals. A separate attenuator is available for each of the four inputs. In...
Doepfer A-100 LC1 Low Cost Case for Eurorack Modules; build-in Power Supply A-100SSB (+12V/380 mA, -12V/380mA); 48 TE Version of the A-100LC3; build-in Bus Board with 8 Module connectors; Housing...
Quad ADSRThe module contains 4 independent ADSR envelope generators. Each sub-module has the controls Attack, Decay, Sustain and Release. With the 3-stage range switch, the desired time range can be...
Module Dual linear/exponential, VCA
Spring Reverb ModuleDoepfer A-199 is a spring reverb module, which electronically simulates the reverb effect with the aid of spiral springs. Spring reverb systems have a characteristic sound...
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...
Wasp Filter Module A-124 is a special 12 dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies,...
Doepfer A-157 Trigger Sequencer Subsystem 1-2-3, contains: A-157-1 Trigger Matrix (8x16) + A-157-2 Output Module and A-157-3 Input Module, generate up to eight trigger signals controlled by a 8x16...
Basic VCO for the A-100 modular system Voltage controlled oscillator, 3-Position toggle switch, Linear FM input and soft-sync input, Tune control range can be set between approx. 1/2 octave and 4...
Analog and Trigger Sequencer for Modular System A-100 The following functions are available for the two analog rows (rotary knobs): 8 Rotary potentiometers, Scale (stepless knob) on the lower...
LFO Modulation Generator The module A-145 (LFO) is a low frequency oscillator, which generates periodic control signals in a wide frequency range. Five wave forms are available: saw tooth, inverted...
|Unitá vendute||1 Pezzo|
|In catalogo dal||gennaio 2004|
|Livello di vendita|
|in questa categoria||Classifica 48|
|su thomann.de||Classifica 10968|
- Doepfer Sistemi Modulari in mostra
- Mostra Sistemi Modulari nella gamma di prezzo 70 € - 90 €
- Vai al gruppo del prodotto Sistemi Modulari
- Vai al gruppo del prodotto Synth
- Vai al gruppo del prodotto Tastiere
- Mostra le informazioni del produttore per Doepfer
- Doepfer Tastiere in generale
- Vai alla versione stampabile della pagina