Crown XLS 1002

101

DriveCore Power amplifier

  • With Class-D circuit
  • Power: 2x 550 Watt / 2 Ohm, 2x 350 Watt / 4 Ohm, 2x 215 Watt / 8 Ohm, bridged 1x 1100 Watt / 4 Ohm, bridged 1x 700 Watt / 8 Ohm
  • Amplifier modes: 2-channel stereo, mono bridged or Y mode
  • 24 dB Linkwitz-Riley crossover
  • Input Sensitivity 1.4 or 0.775 V
  • Large front display for easy operation
  • Black-Out mode automatically switches off the display
  • Lock-out mode against incorrect operation
  • Remote power for remotely turning on and off
  • PeakX limiter per channel
  • Quiet, temperature controlled fan
  • Rugged metal housing
  • 5 status LEDs per channel
  • Connections: XLR, jack and RCA inputs, 2x Speaker Twist and screw outputs
  • Design: 19" / 2U
  • Depth: 19.6 cm
  • Weight: 3.9 kg
In catalogo dal Ottobre 2015
Numero di articolo 372524
Unitá incluse 1 Pezzo
Power (4 Ohms) per Channel 350 W
Channels 2
Rack Units 2 U
Amp Class Class D
2 Ohm stable Yes
DSP/Crossover Yes
Convection cooling No
Width in mm 483 mm
Depth in mm 196 mm
Height in mm 89 mm
Weight 3,9 kg
Bridged Mode 1
Input XLR 1
Input Cinch 1
Jack Input 6,3 sym. 1
Parallel Input 1
Link Out 6,3 mm sym.
Output Speaker Twist 1
Output Binding Post 1
Mostra altro
€ 415
Spedizione gratuita, incl. IVA
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

101 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

uso

Caratteristiche

Suono

Qualità

66 Recensioni

DM
Crown XLS 1002
Dr. Marco Castrucci - MyHomeStudio 31.07.2020
Utilizzo il finale di potenza per l'amplificazione di una coppia di monitor DriveLine AudioPerformance Swiss. Il finale eroga una potenza adeguata e l'impostazione dei filtri sul pannello frontale aiuta ad effettuare un settaggio veloce. Leggero e comodo. Rumorosa la ventola, tuttavia tenendolo lontano dalla zona di utilizzo il problema è minimo.
uso
Caratteristiche
Suono
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
G
Great lightweight and easy to use.
Graham3281 20.03.2017
I bought this to use as a poweramp for my bass rig. I use a Sansamp RBI preamp into the XLS 1002 which when bridged gives 1100W into 4 ohms (more than I'll ever need).

The selecatble dual sensitivity input is a superb inclusion and improvement over predecessors. It allows lower power input sources and preamps to be connected etc.

The overall sound is clean, transparent, powerful and replicates the output of my bass and preamp without colouration.

The built-in crossover is brilliant and very easy for a technophobe like me to program the output frequency range. Choose from high pass, low pass, or select a bandwidth.

The unit is well built, looks superb in my rack unit (the blue LEDs match my Korg rack tuner!).

While this model is perfect for my needs, it is relatively low powered for PA and stereo output applications, but the higher power versions in the DriveCore range have greater power needs well covered.

Great value for money. Highly recommended.
uso
Caratteristiche
Suono
Qualità
7
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
PS
awesome, great preamp for cheap
Paul Snow 01.11.2021
I use this amp for amplifying my mixing/mastering/producing set-up - MacBook into preamp, into this, into my speakers and sub. I also use it for home listening - DAP or MacBook straight into this, then into my speakers. I also recently used it at a small concert as a PA amp.
This amp has always met my expectations and in some cases exceeded them. To my ears it sounds wonderfully clean and accurate - compared to my old JVC amp which may have more 'warmth' but lacks clarity. It's built very well, the fans are exceptionally quiet, and I personally think it looks very cool. We had it centre piece of the stage and the level leds really added something to the general feeling and ambience of the performance.
I would enjoy a few more in- and outputs but I guess we are dealing with a budget-level piece of construction here, somehow the costs must be kept down. I'm also not 100% certain it's as loud as it should be - could have something to do with my set-up but it lacks the punch of my vintage JVC which has a similar rating.
All in all though, I am very happy with this amp and would recommend it to anyone looking for hi-fi and high-rating amplification on a budget.
uso
Caratteristiche
Suono
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
p
Oldie but goodie
pauldavidthomas 14.12.2019
This has been around for quite some time, but it still does what it say on the tin. It's a class d amp and great value for money. I'm sorry, but you blind test an A/B amp and a D amp of the same power and you're not going to be able to tell the difference.

I'm using this ( I've got three ) with a surround amp and it's got some power and sounds great. It's good you can turn all the lights off too...
uso
Caratteristiche
Suono
Qualità
2
0
Segnala un abuso

Segnala un abuso