Palmer - panoramica dei prodotti
123 risultati. Visualizza articoli 5175.
I prezzi includono l'IVA locale Spedizione gratuita per acquisti di un importo superiore a € 298
La ricerca non ha dato risultati :-(
Uno dei filtri ultizzati ha determinato che nessun prodotto sia stato trovato!
Uno dei filtri ultizzati ha determinato che nessun prodotto sia stato trovato!
Puoi rimuovere uno o più filtri e riprovare Oppure riutilizzare uno dei filtri usati in precedenza.
Limited Speaker Simulator 19 " / 1U, 8 Ohm Speaker Simulator, One of the most searched rack parts ever, Simulates the sound of a 4x 12 Box at low volume, Is directly connected to the speaker-out of the amplifier,...
- 19 " / 1U
- 8 Ohm Speaker Simulator
- One of the most searched rack parts ever
Guitar DI-box and speaker simulation Joe Bonamassa Signature Model, JB switch: Off / Medium / Heavy - behaves like a mid boost, Attenuator: 24/12/0 db, Deep / Normal / Flat voicing switches, Bright / Normal / Mellow voicing switches,...
- Joe Bonamassa Signature Model
- JB switch: Off / Medium / Heavy - behaves like a mid boost
- Attenuator: 24/12/0 db
1-Channel Isolating Transformer Cast aluminum housing, Jack input and output, Ideal for dejamming of guitar racks, 5 year manufacturer's warranty
- Cast aluminum housing
- Jack input and output
- Ideal for dejamming of guitar racks
2-Channel Isolating Transformer In die-cast aluminium housing, Jack inputs and outputs, Ideal for clearing interference from stereo signals, 5-Year manufacturer's warranty
- In die-cast aluminium housing
- Jack inputs and outputs
- Ideal for clearing interference from stereo signals
Independent Battery Power Supply for Effect Units Capacity: 4000 mAH, Durable Lithium Polymer battery, Two regulated 9V DC outputs with each 500 mA, USB-A port for charging a phone or tablet, 5-Segment battery status indicator, Flat metal housing for...
- Capacity: 4000 mAH
- Durable Lithium Polymer battery
- Two regulated 9V DC outputs with each 500 mA
Rolling Set Including screws for bass and guitar boxes, 2 Swivel castors, 2 Swivel castors with brake, Wheel diameter: 50 mm, Height: 72 mm, Load capacity per set: 120 kg, Mounting holes Ø: 6.5 mm, Width of tread: 16...
- Including screws for bass and guitar boxes
- 2 Swivel castors
- 2 Swivel castors with brake
Power Adapter For all Palmer devices with 9 V connection and a maximum current consumption of 500 mA, Suitable for PEBFRO, PEBHER, LDHPA1, PDUETTO, PGA03, PTHRUSTER, PTRIAGE, PTRINITY, LD HPA 1, Input voltage: 100 - 240V AC 50Hz
- For all Palmer devices with 9 V connection and a maximum current consumption of 500 mA
- Suitable for PEBFRO, PEBHER, LDHPA1, PDUETTO, PGA03, PTHRUSTER, PTRIAGE, PTRINITY, LD HPA 1
- Input voltage: 100 - 240V AC 50Hz
Power Conditioner Specially designed for effect devices and pedalboards, Eliminates or reduces noise induced by inferior power supplies, Input and output: 2.1 x 5.5 mm barrel socket, negative polarity inside, Automatically detects the polarity of the connected power supply...
- Specially designed for effect devices and pedalboards
- Eliminates or reduces noise induced by inferior power supplies
- Input and output: 2.1 x 5.5 mm barrel socket, negative polarity inside
Protective cover Suitable for Palmer 1x 12" cabinets and Palmer Fat 50 1x 12" combo, Material: Nylon, Dimensions (W x D x H): 580 x 290 x 450 mm, Weight: 200 g, Colour: Black
- Suitable for Palmer 1x 12" cabinets and Palmer Fat 50 1x 12" combo
- Material: Nylon
- Dimensions (W x D x H): 580 x 290 x 450 mm
Universal pedalboard power supply With 4x 9V DC 250 mA outputs (isolated), Dimensions (W x D x H): 80 x 90 x 25 mm, Weight: 0.12 kg, Includes 4x DC cables and power adapters
- With 4x 9V DC 250 mA outputs (isolated)
- Dimensions (W x D x H): 80 x 90 x 25 mm
- Weight: 0.12 kg
Passive microphone splitter 4 Channels, Nominal impedance of the inputs / outputs: 200 Ohm, Max. input: +6 dB, Format: 19" / 1U, On the front of each channel: One input, one parallel jack (output for looping phantom power), and...
- 4 Channels
- Nominal impedance of the inputs / outputs: 200 Ohm
- Max. input: +6 dB
Palmer Octobus 8-Speed effect looper, 32 Programmable presets, True Bypass, 300 mA Power consumption (9V power supply included), Measurements (W x H x D): 455 x 110 x 45 mm
- 8-Speed effect looper
- 32 Programmable presets
- True Bypass
Active Mono DI Box Inputs: 6.3 mm jack and XLR female, Parallel 6.3 mm jack output, XLR male output, Pad switch (-10 dB / -20 dB / -30 dB), Switchable gain boost: +12 dB, Switchable ground lift, Operates with...
- Inputs: 6.3 mm jack and XLR female
- Parallel 6.3 mm jack output
- XLR male output
Line Isolation Box 2-Channel isolation transformer, Diecast aluminium housing, RCA inputs and outputs, Ideal for suppressing hum loops in hi-fi racks or eliminating light machine noises in the car hi-fi range, 5 Year warranty
- 2-Channel isolation transformer
- Diecast aluminium housing
- RCA inputs and outputs
Active DI box Line isolation box or pickup amplifier, Unbalanced and balanced signal routing, Balanced outputs with 2 x XLR jack (front and rear), 20 dB pad for microphone inputs, 3 Stage switchable line inputs up to 18 dB,...
- Line isolation box or pickup amplifier
- Unbalanced and balanced signal routing
- Balanced outputs with 2 x XLR jack (front and rear)
All-Tube Amp Head 1 Watt, Class A construction, 1 Input (6.3mm jack), 4 Outputs ( 6.3 mm jack), Output impedance 8 & 16 ohm, 1 Channel, Controller: Volume & tone, Preamp: 1x ECC83, Amplifier: 1x ECC82, Solid state rectifier,...
- 1 Watt
- Class A construction
- 1 Input (6.3mm jack)
Electric Guitar Speaker Open design, Equipped with 1x 12" Eminence Maverick speaker, Rated power: 75 W, Impedance: 8Ω, Front grill: Black / Silver material, detachable, 2x 6.3 mm Jack sockets, Cabinet material: Chipboard, Baffle material: MDF, Dimensions (W x...
- Open design
- Equipped with 1x 12" Eminence Maverick speaker
- Rated power: 75 W
Microphone split box 2-Channel splitter box 1" in 3", Aluminium diecast housing, Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1, Nominal level: 0 dB, Maximum level: +20...
- 2-Channel splitter box 1" in 3"
- Aluminium diecast housing
- Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1
Empty Cabinet For 2 x 12" Speaker Speakers can be loaded from the front, Closed-back, Solid workmanship, Dimensions (W x H x D): 710 x 480 x 295 mm, Including connection plate with labelling fields, connecting cable and mounting...
- Speakers can be loaded from the front
- Solid workmanship
Effect Pedal Delay, Controls: Time, Mix and Rate, Power consumption: 30 mA, Dimensions (W x D x H): 60 x 100 x 55 mm, Battery operation possible, Matching power supply: Art.409939 (not included)
- Controls: Time, Mix and Rate
- Power consumption: 30 mA
DI Box Passive, 1-Channel, PAD switch (0dB / -30dB), Input Link as a jack, Merge function to convert 2 mono-signals to a balanced signal, Balanced XLR output, Input Impedance: 68 kOhm, Output Impedance: 600 Ohm, Transfer ratio of symmetry...
- PAD switch (0dB / -30dB)
Passive monitor controller in robust metal housing Real wood edges, 2x Jack/XLR combo input, 1x 3.5 mm Stereo jack input, 2x XLR male output, 1x 3.5 mm stereo jack out, Switchable mute, Switchable mono-summing, Dimensions: 164 x 62 x...
- Real wood edges
- 2x Jack/XLR combo input
- 1x 3.5 mm Stereo jack input
Line summer/merger, isolated signal combiner When mixing electrical signals, the sources can affect each other. Decoupling resistors can reduce the effect, but lossless mixing is only possible with an active circuit. Active electronics always involve some extra effort and...
- Input 1: Balanced XLR/f via a galvanically isolated transformer. Balanced decoupling via resistors. Total resistance: 2 kOhm
- Maximum sound level for THD <0.5% @ 35 Hz: +20 dBu. Ground lift switch
- Input 2: Balanced XLR/f. Balanced decoupling is via resistors. Resistance: 2 kOhm
Overdrive Controls for gain, clean, tone and level, Input pad switch, True bypass, 9V DC connector (power supply not included)
- Controls for gain, clean, tone and level
- Input pad switch
- True bypass
Active 2-Channel DI-Box Switchable pad: 0/-30 dB, 2 Jack inputs, 2 Jack link outputs, 2 Balanced XLR outputs, Balanced XLR mix output, Switchable ground lift per channel, Input impedance: 1 MOhm, Output impedance: 200 Ohm, Max. input level: +45...
- Switchable pad: 0/-30 dB
- 2 Jack inputs
- 2 Jack link outputs
Mostra di più
Le offerte includono il 22% di IVA italiana e sono valide fino ad esaurimento scorte. I costi di trasporto per l´Italia sono di 20 EUR (isole escluse). Per avere maggiori informazioni clicca qui. Non rispondiamo di errori di digitazione o informazioni inadeguate di nessun tipo. *PPC = prezzo al pubblico consigliato dal produttore/distributore in Germania.