Area Cliente - Login
Paesi e lingue Country and Language

Behringer U-Control UCA202

522

Compact USB/Audio Interface

  • With very low latency
  • With 48 kHz converters
  • Input/Output: 2 x RCA each
  • Headphone connector 3.5 mm with adjustable volume
  • Optical S/PDIF output
  • Bus-powered
  • Plug and play on Windows or Mac
Recording / Playback Channels 2x2
Number of Mic Inputs 0
Number of Line Inputs 2
Number of Instrument Inputs 0
Number of Line Outs 2
Headphone Outs 1
Phantom power No
Number of S/PDIF Connectors 1
Number of ADAT Connectors 0
Numer of AES/EBU Connectors 0
Number of MADI Connectors 0
Ethernet 0
Other Connectors No
MIDI interface No
Word Clock No
Max. sample rate (kHz) 48 kHz
Max. resolution in bit 16 bit
USB Bus-Powered Yes
Incl. power supply Yes
USB Version 1.1
Width in mm 88 mm
Depth in mm 60 mm
Height in mm 22 mm
In catalogo dal Marzo 2006
Numero di articolo 191768
Included in delivery USB cable
Zero latency monitoring 1
Mostra altri
€ 22,50
IVA inclusa, € 15 di di costi di spedizione aggiuntivi aggiuntivi
Disponibilità immediata
Disponibilità immediata

Questo articolo è disponibile in magazino e può essere spedito a breve.

Informazioni sulla spedizione
1
55 Classifica vendite

522 recensioni del cliente

RE
Istallazione immediata!!
Renato E. 10.10.2015
Come scheda audio essendo solo a 16 bit non suona benissimo
ma sicuramente meglio della uscita audio del pc.
Il suo grande pregio è quello che si autoistalla e il pc la riconosce
immediatamente quindi non bisogna accedere a nessuna operazione su pc ....
Molto utile e pratica direi ready to play!!
Qualità
Caratteristiche
uso
Suono
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Useful DAC
Adrian3174 09.12.2015
This is a cheap entry level DAC and does look a bit flimsy. The USB lead is hard wired which is a shame as the possibility of using a filtered lead is not an option. On the plus side the DAC is plug and play and no additional drivers or software is required. Audio quality from the phono output sockets is very good and I have looked at the output on my oscilloscope so can confirm that the frequency response is flat throughout the audio range. Channel balance is good and the signal to noise ration is more than acceptable for home studio use. The headphone output is weak and does not drive my Sennheiser HD530's very well at all. The output distorts if the volume is turned up anything more than can be described as 'quiet' The ADC side of the UCA202 is unfortunately featureless, sound quality is good but there is no way to adjust the record level which means that you need to control the level going into the UCA202 to avoid clipping or noise. I feel that an adjustable gain pot either in software of on the UCA202 itself would make the unti far more useable.

In conclusion. You get what you pay for, sound quality is good but the unit looks flimsy and lacks features. The headphone output was lacking output power.
Qualità
Caratteristiche
uso
Suono
3
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
K
Quality on a budget
Kumisaapas 05.05.2020
This is a very capable little gadget, considering the cheap price point. The DAC chip inside perfoms quite admirably.

One thing to note, however, is that Behringer has started using a different DAC chip since I bought mine. The current revisions of UCA202 are using a cheaper off-brand component which doesn't perform as well as the original one.

So if the quality of the DA conversion is important to you, you might want to look elsewhere. Previously this was known as the king of budget DA conversion, but these days it's no longer true.
Qualità
Caratteristiche
uso
Suono
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
w
Not able to record line in input with ASIO4All windows 10
wiener303_79 29.10.2020
Not able to record line in input with ASIO4ALL driver with windows 10.
If inputs enabled I hear a very high frequency noise.
Now I bought a Steinberg UR22C. output Latency is reduced from 27 ms to 15 ms
Qualità
Caratteristiche
uso
Suono
1
0
Segnala un abuso

Segnala un abuso

Adatto a YouTube

Consulenza