Millenium BS-1100

Sturdy Monitor Stand

  • Tripod construction
  • Height adjustable
  • Adjustable rubber feet and spikes for balance compensation on uneven surfaces
  • Height: 740 - 1140 mm
  • Dimensions of the supporting surface: 230 x 230 mm
  • Side length per foot: 26 cm
  • Max. load bearing capacity: 30 kg
  • Weight: 4 kg
  • Material: Steel
  • Colour: Black
259 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 /5
  • quality
Total
quality
Great Monitor Stands
Schengis, 28.06.2019
I'm currently using these stands to prop up a pair of Adam T7Vs, which certainly aren't the smallest monitors you can buy. So far I haven't had any issues regarding stability or support.

One of the nice things is that you can manually change the height of each individual foot to deal with potentially uneven flooring. I personally wouldn't use the foam sticky pads that come with the stands, but that's just my opinion. I opted to buy some acoustic foam pads to manage the vibrations a bit better.

Pros:
- Stable, adjustable, quiet
- Can fit into most corners of any room
- The mount can swivel into your ideal position

Cons:
- Feet feel a little bit weak
- Swivel mount has come loose if not tightened well
- Crappy sticky foam pads (would just throw away)

All in all I would recommend these stands to anyone looking for a set. They do their job and are quite adjustable and stable.

Very satisfied with my purchase.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
A very 4 star product
t4tris, 21.06.2020
The bottom could use a fourth foot for perfect stability. With big monitors, you can have a lot of weight on top of not a lot of foot if you're not careful.
The adjustment mechanism can be awkward as there's nothing from keeping you from rotating the top part's holes out of alignment of the bottom part's spring loaded pin. If it's the knob that ultimately holds the parts solidly against each other, why not just make the holes on the shaft bigger, so it's easier to align?
The build quality overall is slightly crude, but as far as I can tell it's only an aesthetic concern. Corners aren't sharp or anything.

Otherwise they're perfect for the purpose of holding monitors.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Very sturdy stands
THE stands, 09.06.2018
If you are a DJ or a producer who need's monitors on good quality and strong stands then these are perfect for you.

I have four of these. Two for my Yamaha MS8 (for production) and two for my Worfedale E30 (for DJing).

In the box you will get:

1x Manual
1x Imbus screw for the plate
1x Imbus screw for the stand
3x Adjustable nuts
3x Feet shaped as a cone
3x Feet with plastic coating
4x Fomas with glue coating
1x Small size imbus
1x Large size imbus

Pros:

The stand is very sturdy if you bump into this stand it won't fall easily but be cearful not to hit it to hard.

The legs shaped as Y helpes positioning the stand to the corner of your wall and take up little space.

The feet have a plastic coating are adjustable.

You also get feet shaped as a cone to lower the vibration from the monitors.

Easly adjustable hight.

Packaged with manual, tools and screws and easy to assemble.

Cons:

Adjusting the position for the monitors can be a bit tricky because you need to face them to your ears. I advice to use a meter.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Pleasantly surprised
23.08.2014
I had to look around for a while to find a pair of tripods to my VXT8 that would be both stable, but at a good price. The speakers weigh after all, nearly 17 kg, which requires a bit of a pair of tripods. But I have to say I was pleasantly surprised by these. A large platform for the speakers to stand on, rubust construction and adjustable feet to obtain the slope and direction of the sound you want. The advantage of the three legs on the stands, and adjustable feet, is that you will develop a solid performance even on bumpy floors. The platform can be rotated 360 degrees and the whole stand is height adjustable. Highly recommended...
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Millenium BS-1100
(259)
Millenium BS-1100

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces, Height: 740 - 1140 mm, Dimensions of the supporting...

Millenium BS-500 Set
(5011)
Millenium BS-500 Set

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 45 kg, Length of triangular base: 45...

Gravity SP 3202 Studiomonitor Stand
(303)
Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors Massive cast-iron foot, Black powder-coating, Load capacity: 50 kg, Pipe diameter: 42/35 mm, Height adjustable from 900 - 1500 mm, Dimensions shelf: 250 x 250 mm, Weight:...

Millenium BS-500 WH Set
(290)
Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm,...

K&M 26740
(120)
K&M 26740

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

Millenium Floor Monitor Stand DM1
(33)
Millenium Floor Monitor Stand DM1

Stand for Monitor Speaker Height adjustable from approx. 90 - 150 cm, Upper shelf (W x D): Approx. 256 x 330 mm, +/- 10 ° Inclinable, Clear dimension of the base plate (W x D): Approx. 48 x 43 cm,...

Stairville Adjustable Moving Head Tower
(10)
Stairville Adjustable Moving Head Tower

Height Adjustable Stand For moving heads, loudspeakers or similar, Height adjustable from 96 to 176 cm in 10 cm increments, Tube diameter: 43/35 mm, Dimension of support plate: 35 x 30 cm,...

K&M 26754
(30)
K&M 26754

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

Genelec Z8000-409B Floor Stand
(31)
Genelec Z8000-409B Floor Stand

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

Zaor Miza Stand V36 Black
(23)
Zaor Miza Stand V36 Black

Monitor Stand Pair High quality monitor stands made of chipboard coated with melamine resin, Simple and modern design, Low vibration, Fixed height: 920 mm, Area of base and shelf: 300 x 300 mm,...

Neumann LH 65
(41)
Neumann LH 65

Table Stand For Neumann KH120 speaker, Horizontally and vertically adjustable, Height adjustable, Dimensions (W x H x D): 185 x 488 x 312 mm, Colour: Black

€35
Including VAT; Excluding €15 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Online Guides
Monitor Speakers
Monitor Speakers
In this guide we’ll outline the basic principles of studio monitors, and take a closer look at their most common features.
 
 
 
 
 
Downloads
 
 
 
 
 
test results:
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
2
(2)
Recently Viewed
MOTU UltraLite mk5

USB 2.0 Audio Interface With USB C connector, ESS Sabre32 Ultra DAC technology, 24 Bit / 44.1 - 192 kHz, Precise level meters for all analogue inputs/outputs with high-resolution OLED display, 2 Microphone / line / Hi-Z inputs via…

Recently Viewed
Line6 Relay G10TII Transmitter

Line6 Relay G10TII Transmiiter, 2,4 GHz plug and play Wireless transmitter for Relay G10 systems or Spider V series from Spider V 60, with internal receiver, audio frequency range 10 - 20.000 Hz, automic frequency setup, 118 dB SPL max.,…

Recently Viewed
Kawai KDP-120 B

Kawai KDP-120 B Digital Piano - 88 weighted keys, RH-CII keyboard and Harmonic Imaging (HI), three sensors, 88-key piano sampling, 15x sounds, Shigeru Kawai SK-EX sound, Shigeru Kawai SK-EX concert grand piano sound with new low balance volume feature, which…

Recently Viewed
IK Multimedia UNO Synth Pro Desktop

Analog synthesizer Paraphonic analog synthesizer with step sequencer, arpeggiator and effects section, Three wave morphing oscillators with PWM, sync, frequency and ring modulation, dual state variable filter with 24 modes, amplifier, Original OTA filter from the UNO Synth as…

1
(1)
Recently Viewed
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

Recently Viewed
Harley Benton TableAmp V2 BlueTooth

Harley Benton TableAmp V2 BlueTooth, compact amplifier with great features for play-along and sing-along with streamed music using the integrated Bluetooth feature, ideal for acoustic guitar, ukulele, electric guitar, vocals and music, 30 watt RMS, 1x 5" bass woofer +…

2
(2)
Recently Viewed
Line6 Pod GO Wireless

Line6 Pod GO Wireless; Multi Effects Pedal for Electric Guitar; over 300 effects and models from Helix, M-Series and Legacy products, up to 6 simultaneous amp, cab, and effects models including a looper and a speaker cabinet simulation (Third-Party IR…

Recently Viewed
SSL 500-Series SiX Channel

Solid State Logic 500-Series SiX Channel; Channel Strip; with SuperAnalogue mic preamp and 5-way LED indicator; +48V phantom power; with phase and HPF switches; separate instrument/line input on front panel with Hi-Z switch (1MO); switchable 2-band EQ with bell and…

2
(2)
Recently Viewed
Otamatone Neo White

Otamatone Neo, Electronic sound toy / synthesizer, standard size, selection of various sounds via new studio smart phone app, cross link of smart phone and Otamatone via cable, power plug for external power supply, stereo headphone jack, volume adjustable, playing…

Recently Viewed
Arturia Pigments 3

Arturia Pigments 3 (ESD); virtual synthesizer; four sound engines with variable sound sources; Harmonic Engine with up to 512 partials; Wavetable Engine with a total of 164 wavetables; Utility Engine with sub-oscillator and two noise sample layers; Jup-8 V4 low-pass…

1
(1)
Recently Viewed
Korg SQ-64

Polyphonic Step Sequencer with 4 Tracks 3 Melody tracks with 8-fold polyphony and 16 patterns of 64 steps each, Drum track with 16 monophonic sub-tracks, 64-Key matrix with illuminated buttons, OLED display, Editing modes per melody track: gate, pitch…

1
(1)
Recently Viewed
Otamatone Neo Black

Otamatone Neo, Electronic sound toy / synthesizer, standard size, selection of various sounds via new studio smart phone app, cross link of smart phone and Otamatone via cable, power plug for external power supply, stereo headphone jack, volume adjustable, playing…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.