Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors

  • Massive cast-iron foot
  • Black powder-coating
  • Load capacity: 50 kg
  • Pipe diameter: 42/35 mm
  • Height adjustable from 900 - 1500 mm
  • Dimensions shelf: 250 x 250 mm
  • Weight: 6.5 kg

Further Information

Type Monitor Stand
Height 900 mm – 1500 mm

These are other customers' choices:

Customers who looked at this item have bought these:

Gravity SP 3202 Studiomonitor Stand
41% bought this exact product
Gravity SP 3202 Studiomonitor Stand
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
€59 Add to Basket
Millenium BS-500 Set
17% bought Millenium BS-500 Set €49
Gravity SP 3202 VT Studiomonitor Stand
8% bought Gravity SP 3202 VT Studiomonitor Stand €55
Millenium BS-1100
6% bought Millenium BS-1100 €35
Millenium Desktop Monitor Mount DM1
5% bought Millenium Desktop Monitor Mount DM1 €21.90
Our most popular Studio Stands
303 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.7 /5
  • stability
  • quality
Total
quality
stability
as a first monitor stand, I can wholeheartedly recommend this
Peter V_, 18.07.2019
Solid boxing, it has some good weight which is of course never a bad thing when it comes to any type of stands. Instruction manual is close to nonexistent, but it does not have too many parts and it's easy to figure out what goes where, so it's not a big issue.

One thing that sort of stood out for me is I could tighten the stem/body to the bottom piece without actually screwing it fully on, which gave me some freedom of rotating the upper piece but at the same time it wasn't straight and I'd assume if left like that it might tend to bend. I had to fully tighten it and move the whole piece around if I had to. Again, not a biggie unless you're cemented to your chair or constantly moving around. I'm using a pair of these for holding up studio monitors for mixing so I'm fine with this.

It wiggles a little bit when pushed (with weight on top of it) but other than that it doesn't budge at all. I'm not using the bottom spike screws only the rubber feet, I'd guess those could give me some additional stability but I'd rather not scratch the floor up with those. As the manual is 4 drawings in total I wasn't sure what to make of those.

In the end, this is my first ever monitor stands and I'm wasn't at all disappointed, I think I got good value for my money. Can totally recommend!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
okay if I dont count the accuracy to quality
sadthoguah, 20.05.2019
the stand is a disaster which shows me once and for all not to buy cheap stuff anymore!

after hooking it up (all the way correct to mention that) the device stood terribly unstraight. so I had to use the spikes first to fix one of the issues and that was to get the stand itself straight and.. after 5 or 6 corrections using the spikes in different positions the stand was straight. the second pro came with the top plate which for shame was also unstraight so.. I cut some paper and pressed it under one of the plates bottoms where the tending was to be unstraight downwards. after doing "all that" I got a well working stand for my mini dekker home studio hybrid homedisco/studio light effect. distastrous man, no cheap gear anymore.

the stand in its core is stable and the quality itself is good but I dont need a stand which isnt accurate after hooking up and putting down on the ground.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Nothing more you can ask for
Bogdan.Bacrau, 03.01.2020
The stand is incredibly sturdy and stable and has some nice to have configuration and safety features:
-The base is heavy metal (\m/) so even if you jiggle the stand by mistake the monitor will most probably stay where it is.
-The platform on which the monitor stands has a border on the front, which fixes the monitor.
-The rod has holes on several heights and a bolt for taking all the weight; this removes the pressure on the locking screw.
-The locking screws are easy to use (you don't need screwdrivers) and very ergonomical (you cannot hurt yourself while doing the adjustments).
-The stand looks very nice, it matches any environment.

I have two such pairs, one for the monitors in the studio and one for the monitors from my personal computer, and I'm very glad I have them. I totally recommend them.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Not the best, but okay (my first ones)
RafaelSaldaña, 13.04.2021
I use them with a pair of Adam T7V and they're okay. They're not fantastic, theyr'e not ultra stable, they're just okay. It won't fall down if you hit them accidentally, but obviusly, with more preasure it will fall down.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Gravity SP 3202 Studiomonitor Stand
(303)
Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors Massive cast-iron foot, Black powder-coating, Load capacity: 50 kg, Pipe diameter: 42/35 mm, Height adjustable from 900 - 1500 mm, Dimensions shelf: 250 x 250 mm, Weight:...

Millenium BS-500 Set
(5011)
Millenium BS-500 Set

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 45 kg, Length of triangular base: 45...

Millenium BS-500 WH Set
(290)
Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm,...

K&M 26740
(120)
K&M 26740

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

Millenium BS-1100
(259)
Millenium BS-1100

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces, Height: 740 - 1140 mm, Dimensions of the supporting...

Gravity SP 3202 VT Studiomonitor Stand
(73)
Gravity SP 3202 VT Studiomonitor Stand

Vari-Tilt Studio Monitor Stand Solid cast iron foot, Black powder coating, Load capacity: 50 kg, Pipe diameter: 42 / 35 mm, Height adjustable from 900 - 1500 mm, Maximum angle of inclination of...

Millenium Floor Monitor Stand DM1
(33)
Millenium Floor Monitor Stand DM1

Stand for Monitor Speaker Height adjustable from approx. 90 - 150 cm, Upper shelf (W x D): Approx. 256 x 330 mm, +/- 10 ° Inclinable, Clear dimension of the base plate (W x D): Approx. 48 x 43 cm,...

Stairville Adjustable Moving Head Tower
(10)
Stairville Adjustable Moving Head Tower

Height Adjustable Stand For moving heads, loudspeakers or similar, Height adjustable from 96 to 176 cm in 10 cm increments, Tube diameter: 43/35 mm, Dimension of support plate: 35 x 30 cm,...

K&M 26754
(30)
K&M 26754

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

Genelec Z8000-409B Floor Stand
(31)
Genelec Z8000-409B Floor Stand

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

Zaor Miza Stand V36 Black
(23)
Zaor Miza Stand V36 Black

Monitor Stand Pair High quality monitor stands made of chipboard coated with melamine resin, Simple and modern design, Low vibration, Fixed height: 920 mm, Area of base and shelf: 300 x 300 mm,...

€59
Including VAT; Excluding €15 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
2
(2)
Recently Viewed
MOTU UltraLite mk5

USB 2.0 Audio Interface With USB C connector, ESS Sabre32 Ultra DAC technology, 24 Bit / 44.1 - 192 kHz, Precise level meters for all analogue inputs/outputs with high-resolution OLED display, 2 Microphone / line / Hi-Z inputs via…

Recently Viewed
Line6 Relay G10TII Transmitter

Line6 Relay G10TII Transmiiter, 2,4 GHz plug and play Wireless transmitter for Relay G10 systems or Spider V series from Spider V 60, with internal receiver, audio frequency range 10 - 20.000 Hz, automic frequency setup, 118 dB SPL max.,…

Recently Viewed
Kawai KDP-120 B

Kawai KDP-120 B Digital Piano - 88 weighted keys, RH-CII keyboard and Harmonic Imaging (HI), three sensors, 88-key piano sampling, 15x sounds, Shigeru Kawai SK-EX sound, Shigeru Kawai SK-EX concert grand piano sound with new low balance volume feature, which…

Recently Viewed
IK Multimedia UNO Synth Pro Desktop

Analog synthesizer Paraphonic analog synthesizer with step sequencer, arpeggiator and effects section, Three wave morphing oscillators with PWM, sync, frequency and ring modulation, dual state variable filter with 24 modes, amplifier, Original OTA filter from the UNO Synth as…

1
(1)
Recently Viewed
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

Recently Viewed
Harley Benton TableAmp V2 BlueTooth

Harley Benton TableAmp V2 BlueTooth, compact amplifier with great features for play-along and sing-along with streamed music using the integrated Bluetooth feature, ideal for acoustic guitar, ukulele, electric guitar, vocals and music, 30 watt RMS, 1x 5" bass woofer +…

2
(2)
Recently Viewed
Line6 Pod GO Wireless

Line6 Pod GO Wireless; Multi Effects Pedal for Electric Guitar; over 300 effects and models from Helix, M-Series and Legacy products, up to 6 simultaneous amp, cab, and effects models including a looper and a speaker cabinet simulation (Third-Party IR…

Recently Viewed
SSL 500-Series SiX Channel

Solid State Logic 500-Series SiX Channel; Channel Strip; with SuperAnalogue mic preamp and 5-way LED indicator; +48V phantom power; with phase and HPF switches; separate instrument/line input on front panel with Hi-Z switch (1MO); switchable 2-band EQ with bell and…

2
(2)
Recently Viewed
Otamatone Neo White

Otamatone Neo, Electronic sound toy / synthesizer, standard size, selection of various sounds via new studio smart phone app, cross link of smart phone and Otamatone via cable, power plug for external power supply, stereo headphone jack, volume adjustable, playing…

Recently Viewed
Arturia Pigments 3

Arturia Pigments 3 (ESD); virtual synthesizer; four sound engines with variable sound sources; Harmonic Engine with up to 512 partials; Wavetable Engine with a total of 164 wavetables; Utility Engine with sub-oscillator and two noise sample layers; Jup-8 V4 low-pass…

1
(1)
Recently Viewed
Korg SQ-64

Polyphonic Step Sequencer with 4 Tracks 3 Melody tracks with 8-fold polyphony and 16 patterns of 64 steps each, Drum track with 16 monophonic sub-tracks, 64-Key matrix with illuminated buttons, OLED display, Editing modes per melody track: gate, pitch…

1
(1)
Recently Viewed
Otamatone Neo Black

Otamatone Neo, Electronic sound toy / synthesizer, standard size, selection of various sounds via new studio smart phone app, cross link of smart phone and Otamatone via cable, power plug for external power supply, stereo headphone jack, volume adjustable, playing…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.