Millenium BS-500 Set

Set of Height Adjustable Monitor Stands

  • For near-field monitors
  • Panel surface: 23 x 23 cm
  • Height adjustable over several steps from 93 - 115 cm
  • Maximum load: 45 kg
  • Length of triangular base: 45 cm per side
  • Weight: 7.9 kg per stand
  • Set of 2 in a box

Nem választottál ki terméket

A terméket megtekintő ügyfelek ezeket vásárolták tőlünk

Millenium BS-500 Set
61% vásárolta meg ezt a terméket
Millenium BS-500 Set
Azonnal szállítható
Azonnal szállítható

A termék raktáron van, azonnal szállítható.

Szállítással kapcsolatos tájékoztató
49 € A kosárba
Millenium Desktop Monitor Stand DM2
vásárlóink 8százalékának választása: Millenium Desktop Monitor Stand DM2 18.90 €
Millenium Desktop Monitor Mount DM1
vásárlóink 6százalékának választása: Millenium Desktop Monitor Mount DM1 15.70 €
Gravity SP 3202 Studiomonitor Stand
vásárlóink 5százalékának választása: Gravity SP 3202 Studiomonitor Stand 48 €
Millenium Desktop Monitor Stand DM3
vásárlóink 3százalékának választása: Millenium Desktop Monitor Stand DM3 30 €
Kedvenc Stúdióállványok
4123 Vásárlóink értékelései
  • 5
  • 4
  • 3
  • 2
  • 1
4.2 / 5.0
  • kivitelezés
1808 szöveges értékelés Összes értékelés olvasása
gb Automatikus fordítás (Eredeti megjelenítése)
gbEredeti értékelés (Fordítás megjelenítése)
Sajnos hiba történt. Kérjük, később próbálkozz újra.
Összesen
kivitelezés
Solid, Semi-Stable and Good for Homestudio
Ceyhun K., 01.10.2016
Positive: These stands are easy to mount/ adjust and are solid. They are stable for as long as the floor is perpendicular and not askew, and the height of the pole is not set too high.

The triangle shaped foot is very handy not only for stabilization but also for fitting the stand in corners! The adjustability is very flexible and suits for one's needs. One can adjust the height of the pole and the direction of the surface holder accordingly.

There is a soft material on the corners of the surface holders which prevents the speaker from sliding and shocks.

Negative: Consider taking the measurements of contact surface area of the stand and your speakers before buying. I have the Yamaha HS8 which does not perfectly fit on the surface of the stand, the speaker comes 1 to 2 cm out of the surface.

The stand is not that stable when the speaker is bigger or heavy. The surface holder is sometimes difficult to rotate.

Extra: There is a piece of metal that I do not know exactly the utility of. This piece fits in holes of the pole, I use it as a sort of security, if ever the pole doesn't hold and collapses. By putting the piece of metal in the hole, one can prevent/block the pole from sliding to the ground if ever it fails to hold.
Hasznos · Nem hasznos · Jelentem!
Értékelés jelentése...

Tévesnek, illetve valamilyen okból nem megfelelőnek tartod ezt az értékelést?

Jelentés beküldése
gb Automatikus fordítás (Eredeti megjelenítése)
gbEredeti értékelés (Fordítás megjelenítése)
Sajnos hiba történt. Kérjük, később próbálkozz újra.
Összesen
kivitelezés
STURDY MONITOR STANDS
08.07.2015
I just put Yamaha HS8 Monitors on these very well made steel stands. The stands are set up to just sit the monitors on and there's a couple holes pre-drilled for that type of mounting if you're comfortable with it. I would rather not drill the cabinets to secure the monitors on the stands as a personal preference so I'll be making some kind of bracket that will compliment the design and fulfill the purpose.

I really don't think the monitors will slide off because there's nice soft rubber strips on the platform of the stands though I'd just feel better knowing something else is holding them on.

As far as tipping over, I don't believe that will happen unless someone bumps into them quite hard. Currently, I have the stands at the lowest level whereas the stand base seems configured well enough to prevent tipping over at that height. I haven't tried higher levels but the higher they go, I would make sense that would increases the tipping tendency but there's room on the base to put weight if needed. That may not be necessary though, one would have to test it. The lowest height setting is perfect for me and it needs no added weight. It's all simple physics.

Great quality stands that are priced very reasonable.

Shipping takes a little more time from what I'm used to but it's worth a weeks wait or so. The price is more than fair and it seems Thomann is a great place to shop and I will do so again.

The stands are just as described and just as I expected. Thank you for reading my review and good luck shopping for great stuff!
Hasznos · Nem hasznos · Jelentem!
Értékelés jelentése...

Tévesnek, illetve valamilyen okból nem megfelelőnek tartod ezt az értékelést?

Jelentés beküldése
Termékvariációk
Millenium BS-500 Set
(4123)
Millenium BS-500 Set
Tovább
49 €

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 45 kg, Length of triangular base: 45...

Gravity SP 3202 Studiomonitor Stand
(173)
Gravity SP 3202 Studiomonitor Stand
Tovább
48 €

Stand for Studio Monitors Massive cast-iron foot, Black powder-coating, Load capacity: 50 kg, Pipe diameter: 42/35 mm, Height adjustable from 900 - 1500 mm, Dimensions shelf: 250 x 250 mm, Weight:...

Stairville Adjustable Moving Head Tower
(1)
Stairville Adjustable Moving Head Tower
Tovább
244 €

Height Adjustable Stand For moving heads, loudspeakers or similar, Height adjustable from 96 to 176 cm in 10 cm increments, Tube diameter: 43/35 mm, Dimension of support plate: 35 x 30 cm,...

Millenium BS-500 WH Set
(159)
Millenium BS-500 WH Set
Tovább
51 €

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm,...

K&M 26740
(93)
K&M 26740
Tovább
92 €

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

Genelec Z8000-409B Floor Stand
(24)
Genelec Z8000-409B Floor Stand
Tovább
98 €

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

K&M 26754
(11)
K&M 26754
Tovább
119 €

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

Zaor Stand Monitor Cherry Black
(6)
Zaor Stand Monitor Cherry Black
Tovább
269 €

Monitor Stand Isolation of the loudspeaker calibration by means of AERstop Pad on the upper platform, Adjustable height, Material: Mixture of solid wood and melamine resin coated chipboard, Load...

Millenium BS-1100
(193)
Millenium BS-1100
Tovább
37 €

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces, Height: 740 - 1140 mm, Dimensions of the supporting...

Zaor Miza Stand V42 Black
(12)
Zaor Miza Stand V42 Black
Tovább
135 €

Monitor Stand (Pair) High-quality monitor stand made from melamine resin coated chipboard, Simple and modern design, Vibration levels are kept to a minimum, Fixed height: 1071 mm, Stand and support...

Millenium Floor Monitor Stand DM1
(4)
Millenium Floor Monitor Stand DM1
Tovább
51 €

Stand for Monitoring Loudspeaker Height adjustable from approximately 90 - 150 cm, Upper shelf (W x D): Approximately 256 x 330 mm, +/- 10 ° Inclinable, Clear dimension of the base plate (W x D):...

B-stock áll rendelkezésre 47 €-tól
49 € 16 218.12 HUF
ÁFÁ-val, plusz 18 € szállítási költség

A HUF ban feltüntetett ár csupán tájékoztató jellegű.

Azonnal szállítható
Azonnal szállítható

A termék raktáron van, azonnal szállítható.

Szállítással kapcsolatos tájékoztató
Megosztom a terméket
Személyes kapcsolattartód
Tel: +49-9546-9223-30
Fax: +49-9546-922328
Minden ajánlat tartalmazza az ÁFÁ-t, és a készlet erejéig érvényes Nyomdai hibákért és tévedésekért nem vállalunk felelősséget. *Fogy. ár = a gyártó által ajánlott fogyasztói ár.Németország területén
(6247)
Nemrég megnyitott
Thomann V2020 Black 10 Pack

Velcro Cable Ties, Pack of 10 With Velcro, Size (W x L): 20 x 200 mm, Pack of 10, Ideal for microphone and speaker cables up to 10 m long, Colour: Black

(771)
Nemrég megnyitott
the t.bone Micscreen LE

Mobile Absorber and Diffusor Reduces the absorption of undesirable noises such as room reflections and echoes, Due to its design, Micscreen LE can be quickly set up in both the studio and for live applications, Fits almost every standard...

(101)
Nemrég megnyitott
Oktava MPF-1 Pop Filter

Pop Filter Material: fine metal mesh grid, Diameter: 80 mm, Direct mounting to standard microphone holders (shock mount), Height and distance to the microphone can be adjusted

(6949)
Nemrég megnyitott
the sssnake SM10 BK

High-Quality Microphone Cable Length: 10 m, XLR male to XLR female

(10891)
Nemrég megnyitott
Millenium MS 2005

Affordable Microphone Stand with Boom arm Second microphone can be mounted next to the locking screw of the boom arm, 3/8" Threaded connector, Cast metal base, Foldable feet, Max. Height with Boom arm: Approx. 210 cm, Weight: 1.60 kg,...

(56)
Nemrég megnyitott
Audio-Technica AT 2050

Large Diaphragm Condenser Microphone 3 Switchable characteristics: Cardioid, omnidirectional, figure eight, Frequency range: 20 - 20,000 Hz, Switchable Low-Cut 80 Hz, Switchable -10 dB pad, Impedance: 120 Ω, 149 DB SPL max., Weight: 412 g, Incl. AT 8458 Tripod...

(982)
Nemrég megnyitott
the t.bone Windscreen WS60

Windscreen Internal diameter: 40-50 mm, Suitable for all the common microphones (e.g. Shure SM58), Colour: Black

(266)
Nemrég megnyitott
the t.bone MS 250

Metal Pop Filter With 310 mm long gooseneck, Easily adjustable, Diameter: 13.5 cm, For fixing to stands, etc.

(3267)
Nemrég megnyitott
pro snake TPM 10

Professional microphone cable Length: 10 m, Black Yongsheng XLR plug (made by Neutrik), XLR male --> XLR female, Incl. hook and loop fastener

(8188)
Nemrég megnyitott
the sssnake SM6BK

High quality microphone cable XLR Male / XLR Female, Length: 6 m

(6949)
Nemrég megnyitott
the sssnake SM10 BK

High-Quality Microphone Cable Length: 10 m, XLR male to XLR female

(298)
Nemrég megnyitott
pro snake Camera Cable 1,5

Special Cable For direct microphone connection to cameras, mini-disc recorders, PCs, etc., Female XLR to 3.5 mm stereo mini-jack, Mini-jack with solder bridge between ring and tip, Length: 1.5 m, Neutrik connector, Colour: Black, Made in Germany

Visszajelzés beküldése
Visszajelzés Hibára bukkantál, vagy mondani szeretnél valamit az oldallal kapcsolatban?

Örömmel fogadjuk a visszajelzéseket, és igyekszünk a lehető leghamarabb megoldani az általad észlelt problémát.