Stairville DMX Terminator XLR 3-Pol

1522 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.7 /5
  • quality
Total
quality
Does the job, fair price
Artistek, 28.04.2019
Still going strong after several years of use in an installation.
There is no need for a terminator to be any larger than the XLR connector and this one is designed within that size.

This was installed a long time ago (between 5 years and 10) in a venue where I was doing regular freelance work. Once installed, I forgot it was even there. Things have moved on since then and I'm hardly ever at that venue any more but I do know that the terminator is still part of the lighting I installed and all are doing their job just fine. Bear in mind perhaps that this is a static installation so they never get knocked about like they might if they were part of a theatre's lantern stock or in hire stock.

You can easily make terminators yourself if you feel the need but these are convenient to buy, reliable and reasonably priced. If you're specifying for an installation, buy these ready made terminators: they will hardly make a difference to the total cost and will leave you free to concentrate on the bigger tasks.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Good terminator
Lauri Meri, 15.06.2021
Works as promised. I haven't seen one failing yet while using these for many years.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Does exactly what it says it does
16.03.2016
What can you say about a terminator (i'll be back??) Quality is decent, and it works. Job done :)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Works perfectly
Robert285, 02.06.2013
Without this terminator spotlights often behaved inadequately. On the control panel set up one behavior for them. But on the scene, they work differently. Currently is no problem with Terminator on last spotlight. Spotlights are controlled is stable.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
i'LL BE BACK
Liam F., 01.01.2014
If you are involved in lighting then all terminator should be created equal, but the last thing you need is a poor quality one. Spend the money and buy a reliable piece of equipment that reduces rather than adds problems in th rig.
The terminator causes no problems and the xlr of good and robust make. A must for a lighting companies kit bag.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
You need one of these.
SoulWorks, 19.06.2019
I am new to DMX controls, but apparently you need one of these to prevent the signal 'bouncing' back down the DMX chain, and causing problems. They're cheap... and easy to lose due to small size... so I bought two. I've had no problems
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
It does its job
DJSanderson, 22.02.2021
Not much to say, a terminator is probably the technically simplest device that exist.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Must have for lightman
Peco, 29.10.2018
As you may already know you have to have DMXs terminators and this one is ideal. Its sturdy, good quality, stlyish and of course reliable! For the give price it is a really good buy!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Solved problem.
Junior Jeff, 27.10.2018
When I bought these terminators, my light DMX signals stopped conflicting. Now my Moving heads and pars works perfectly with no DMX conflicts.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Did the job
Skatz, 09.02.2020
I bought this for my first DMX set up and it works. I'm glad I read up on it first. Nothing would work without this!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Well worth buying
David45, 24.03.2014
Simple and inexpensive. Good robust product which, although may not seem essential, is a must for peace of mind. Setting up in a new venue with unknown interference levels; yup have to have one of these at the end of the chain.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Good Budget price DMX essential
Pete S., 28.01.2014
It's an odd brandname "Stairville" but this Thomann budget gear has got me started in understanding DMX lighting without breaking the bank and none of it has failed yet (cables, terminators and LED panels all purchased).
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
No problems encountered.
30.03.2017
This does exactly what it says, just stops your DMX signal from bouncing back down the chain and getting messy.
I would recommend buying a spare though, because they're quite small and easily misplaced. It's been great for me so far. Totally cleared up the DMX issues I was having.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Good quality
HMCS, 28.01.2019
We use this for our light bars. The quality and price are very good.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Terminator, and it works
Mace Sounds, 28.07.2020
It's a DMX terminator, works perfectly and looks good too.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
No issues
Roken, 06.09.2017
Does the intended job with no obvious display of how good it's working!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Good stuff
Max Becker, 06.01.2018
It's a DMX terminator, it works, it's solid, that's 'bout it
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Perfect basic terminator
RipChord, 28.11.2018
It's so common - musicians hooking up their lights and they can't get them to work. Most of the time it's because they forgot to terminate properly. Hey we're musicians not lighting techs! This does the job. Carry spares.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Great Item
25.01.2016
If you are at all involved in the lighting buisness, this is one item you should always have in your arsenal, this thing reduces any interference you may receive when working with long runs of dmx or a tricky venue. Not pricey and will give you peace of mind knowing that this is in the end of the chain.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Does the job
JustSomeTheatre, 23.10.2019
Does what I need it to do. Nice and sturdy
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Great Product!
19.05.2016
Works like a charm! Never let us in trouble!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Do what they should. No failures.
14.01.2017
I now have three of these after purchasing more. They do the job they are designed to do. DMX signals work without issue.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
As expected, very affordable
16.03.2016
No complaints, it is a nice price and does what it's supposed to do.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Does what it has to do.
MRZ, 21.02.2014
I've been using these for a while now, and they've never caused any problems, which is what you would expect from such an item. Looks robust and holds fast when plugged in.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Great Quality DMX Terminator
Brian6341, 28.01.2014
I have been using the Stairville Dmx Terminators for awhile now and i have found them excellent. Well built, good quality materials and very sturdy. Ive even stood on one (by mistake of course) and no damage was done to it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report

Stairville DMX Terminator XLR 3-Pol

4,99 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times

Dispatch expected by Friday, 30.07.

Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
9
(9)
Recently Viewed
Harley Benton SC-550 II DFB

Harley Benton SC-550 II Desert Flame Burst; deluxe series; electric guitar; mahogany body (swietenia meliaceae) (weight relief chambered); arched & flamed AAA-maple top; set mahogany neck (swietenia macrophylla king); pau ferro fingerboard; 60`s neck profile; 305mm (12,00") fingerboard radius; 1th…

5
(5)
Recently Viewed
SSL UC1

USB DAW Controller Plug-in controller with convenient mixer layout and legendary SSL workflow, 1:1 Hardware control for the included SSL plug-ins Channel Strip 2 and Bus Compressor 2, Visual feedback via LED rings on the knobs, Display for showing…

Recently Viewed
Kali Audio IN-8 2nd Wave

Kali Audio IN-8 2nd Wave; Active near field monitor; 3 way system with coaxial midrange/tweeter; 8" woofer; 4" midrange; 1" soft dome tweeter; power: 140 Watt (60/40/40 Watt Tri-Amped); frequency range: 37 Hz - 25 kHz (-10 dB), 45 Hz…

Recently Viewed
Novation Circuit Rhythm

Novation Circuit Rhythm; sampler / sequencer; 8 sample tracks with 32 step patterns each, cascadable for up to 256 steps per track; functions: slice, reverse, loop, chromatic play, probability and pattern-mutate; integrated effects such as lofi tape, shutter, reverb, delay…

1
(1)
Recently Viewed
Arturia Keystep 37 Black Edition

Arturia KeyStep 37 Black Edition; 37-key (slimkey) USB controller keyboard; velocity-sensitive mini-keys with aftertouch; 64-step sequencer; chord and scale functionality; arpeggiator; LED display; 4 freely assignable knobs; transport keys; touch stripes for pitch and modulation; RGB LED bar; connections: 3x…

Recently Viewed
Fender SQ Aff. P Bass MN PJ PACK BK

Fender Squier Affinity P Bass MN PJ PACK Black; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: c; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm…

Recently Viewed
Wampler Gearbox Dual Overdrive

Wampler Gearbox Dual Overdrive; Effects Pedal for Electric Guitar; Andy Wood Signature Pedal; features modified versions of two of Brian Wampler’s best loved drive Circuits: Channel 1 based on the Tumnus and Channel 2 based on the Pinnacle; top-switchable Stacking…

1
(1)
Recently Viewed
Sennheiser CX True Wireless Black

Sennheiser CX True Wireless Black In-Ear headset headphone - 7 mm hight end drivers, bluetooth 5.2, up to 9 h running time, up to 27 h with charging case, SBC, AAC, aptX Codec compatible, 110 dB SPL (1 kHz /…

3
(3)
Recently Viewed
Harley Benton SC-550 II PAF

Harley Benton SC-550 II Paradise Amber Flame; deluxe series; electric guitar; mahogany body (swietenia meliaceae) (weight relief chambered); arched & flamed AAA-maple top; set mahogany neck (swietenia macrophylla king); pau ferro fingerboard; 60`s neck profile; 305mm (12,00") fingerboard radius; 1th…

Recently Viewed
Fender SQ Aff. P Bass PJ PACK 3-SB

Fender Squier Affinity P Bass PJ PACK 3-Color Sunburst; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: C; Fingerboard: Laurel; Inlays: Pearloid Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm…

Recently Viewed
KMA Audio Machines Tyler Deluxe Freq. Splitter

KMA Machines Tyler Deluxe Freq. Splitter; Effects Pedal for Electric Guitar & Bass; Two-Channel Signal Splitter with variable 12 dB/oct. Low/High-Pass roll-off, fully-isolated and transformer-based FX Loop Sends; variable Clean Blend and Mix controls allow for the perfect blend of…

Recently Viewed
Bowers & Wilkins PI 7 CG

Bowers & Wilkins PI 7 CG; In-Ear True Wireless headphones; true 24-bit Audio-connection; 2-way-driver design; high performance DSP; Bluetooth 5.0 with AptX Adaptive technology; adaptive, active Noise Cancelling (ANC); charge case with audio-transmission; wirelesse and USB-C charge; supports quick charge;…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.