Rockcase RC 23120B Pedalboard Case

Roadcase

The solution for efficient guitarists who no longer want to fall over scattered pedals and cables or untangle cables for half an hour before every gig.

The Rockcase RC 23120B is a really durable pedal case with removable lid. The pedals are mounted onto the backing board with supplied velcro tape and thus can easily be installed, removed or reorganized. With the acoustic foam padded lid valueable devices are well protected. In order to avoid the annoying wall warts (power supplies), the RC 23120B has an internal stabilised power supply on board. 5x 9V and a 1x12V are likely sufficient for most applications.

The pedals can be divided into 2 loops (e.g. one for effects before amp and one for the insert point). Very thoughtful! At 70 cm width (depth 42 cm, height 15 cm) 6-8 pedals find space

  • For stompboxes
  • Black PVC coated 8 mm thick multiplex
  • Ball corners
  • Detachable lid
  • With acoustic foam padding
  • Internal power supply 300 mA
  • 5x 9V DC stabilized
  • 1x 12V DC stabilized
  • 2 Parallel signal loops
  • Dimensions: 72 x 46 x 21cm
  • Floor height 5.2 cm
  • Inner dimensions (W x D x H): 70.5 x 33.5 x 12cm

Further information

Number Of Effects 8
Incl. power supply Yes
Effect Send/Return Yes
Incl. Gigbag No
Incl. Case Yes

Come up with your own creative bundle and save

If you order this product together with others as part of a bundle, you can save up to 5 % additionally!
Rockcase RC 23120B Pedalboard Case + pro snake Patch Angled Jack 0,15 m 4x +
8 more
Configure bundle now
starting from 199 €
121 customer ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4 / 5.0
  • handling
  • quality
72 written ratings Read all reviews
Total
handling
quality

Not bad for a cheap pedalboard

27.01.2016
I Use a lot of pedals inside this thing. even though the quality really doesnt seem very good, the plastic casing has help up well. The velcro has detached at the bottom but thats because I was messing around with my pedal placement for hours, just be careful with that.

When placed side by side with my 170 euro pedalboard you can really see the difference. You get what you pay for
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality

Almost perfect, power adapter is not very powerful

teok, 08.10.2017
Sturdy, safe, easy to carry (great handle!!!). Can withstand also full body weight (standing on wah, while simultaneously switching another pedal).
It?s a shame that the power adapter is not slightly stronger. It can deliver only 400 mA (not 300 mA as stated) of total current and that can easily be insufficient especially with digital pedals. Considering the fact that you can get a dedicated power adapter for few tens of Euros, it is not a huge problem, but probably would not increase the price significantly if it would be fitted with 2000 mA adapter for example.
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Incl. VAT; plus 20 € shipping
Free shipping from 298 €
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share this product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Offers include 24% Greek VAT and are valid as long as stocks last. Shipping costs to Greece are 20 EUR, free shipping on orders above 298 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Harley Benton Fusion-HSH Roasted Maple Slate Digital ML-2 DPA 4066-OC-A-F10-LH Slate Digital ML-1 IK Multimedia UNO Synth JHS Pedals The Bonsai Hercules Stands HCGS-414B+ Guitar Stand Zynaptiq Intensity Clavia Nord Music Stand V2 Tech 21 DP-3X Solar Guitars S2.6C K&M 17650 Guitar Stand
Recommended
Harley Benton Fusion-HSH Roasted Maple

Electric Guitar Ergonomically shaped mahogany body, "Ultra Flame" flamed maple veneer top, Matching headstock, Bolt-on neck from "roasted" Canadian flamed maple, "Roasted" maple fretboard, Neck shape: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone...

to the product
415 €
(2)
Recommended
Slate Digital ML-2

Small Diaphragm Condenser Microphone For Slate Digital VRS8 Thunderbolt audio interface, similar linear and flat frequency response to the Slate Digital ML-1, Allows microphone placement that is difficult or impossible for a larger microphone, Side mounted pad switch -...

to the product
159 €
Recommended
DPA 4066-OC-A-F10-LH

DPA 4066-OC-A-F10-LH, d:fine CORE 4066 Omni Headset Mic, professional headset microphone with removable and adjustable neck holder for left or right-sided use. Omnidirectional, 20Hz-20kHz with 3dB boost between 8-20kHz, 144dB SPL max.,TA-4F Switchcraft connector for Shure Transmitter . beige, Great...

to the product
719 €
Recommended
Slate Digital ML-1

Large-diaphragm condenser microphone Neutral ML-1 condenser microphone that can be combined with VMS hardware and software, Optional Neutral VMS preamp ensures minimal sound-colouration (not included!), Via VMS plug-in software, you can completely change the sound characteristics even after recording,...

to the product
866 €
Recommended
IK Multimedia UNO Synth

Monophonic analog synthesizer with step sequencer, arpeggiator and effects section Classic setup with 2 VCOs and noise generator, multimode filters, amps, 2 envelopes and LFO, Waveform VCOs Triangle, sawtooth and variable pulse width rectangle, Multimode filter with 12 dB...

to the product
233 €
(1)
Recommended
JHS Pedals The Bonsai

Effect Pedal Overdrive, 9 Tube Screamer Overdrive modes, 5 Classic TS circuits and 2 popular mods, Analogue operation, True bypass, Volume, sustain and tone controls, 9-Way rotary control to select between Tube Screamer modes (OD-1 / TS-808 / TS-9...

to the product
259 €
Recommended
Hercules Stands HCGS-414B+ Guitar Stand

Hercules Stands HCGS-414B +, AGS PLUS Guitar Floor Stand for All Electric Guitars / Electric Basses / Acoustic Guitars/Mandolinen/Banjos and Ukulelne, Auto Grab Holder automatically secures the instrument from falling out, (for standard widths of 40-52 mm) with improved foam...

to the product
44 €
Recommended
Zynaptiq Intensity

Zynaptiq Intensity (ESD); enhancer plugin; innovative algorithm increases detail, clarity, density and loudness of any audio signal; suitable for single tracks, groups, mixbus or mastering; easy to us clearly arranged user interface; additional soft-knee saturating limiter at the output stage;...

to the product
152 €
Recommended
Clavia Nord Music Stand V2

Clavia Nord Music Stand V2 - music stand for Nord C2 Combo Organ, Nord C2D, Nord Electro 3 HP, Nord Electro 4 HP, Nord Electro 5 HP, Nord Electro 6, Nord Piano 88, Nord Piano 2 HA88, Nord Piano 2...

to the product
70 €
Recommended
Tech 21 DP-3X

Preamp for bass dUg Pinnick signature model, Controls: volume, chunk, high, mid, low, comp, drive, Gain switch, Mix button, Chromatic tuner, XLR DI output, TRS input / output, Headphone output, Dimensions (W x D x H): 19.7 x 6.4...

to the product
299 €
(1)
Recommended
Solar Guitars S2.6C

Electric Guitar Body: Mahogany, Neck: Maple, Fretboard: Ebony, Neck profile: C, 24 Super jumbo frets, Graphite nut, Nut width: 43 mm, Scale: 647 mm, Pickups: 2 Duncan Solar humbuckers, Grover 18:1 locking machine heads, Colour: Carbon matte

to the product
711 €
(2)
Recommended
K&M 17650 Guitar Stand

Guitar Stand - Carlos Tall A-frame design, Can be folded flat, Support arms include protective felt pads, Suitable for guitars with nitrocellulose lacquer finishes, Neck lock (Security Lock), Colour: Black, Support depth: 125 mm, Dimensions: 410 x 515 mm,...

to the product
69 €
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.

Please leave a comment. Please enter your e-mail address.