K&M 16090

309 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • handling
  • quality
Total
handling
quality
Made in Germany!
S & K, 13.10.2020
I was looking for a way to keep my headphones nearby without just laying them down on the desk or hanging them over my secondary screen.
All alternatives were either made in China or weren't specified (which by default means China) but then I found out at least these specific products of K&M are made in Germany!

Easy to install on any kind of desk, table or surface if there's enough space at the edge for it to clamp onto. It easily holds up to 2 headphone sets and keeps hanging, solid as a rock.
The major advantage to adhering something permanently is that you can take this one off completely or place it somewhere else without any trouble.

Very happy I found this product after looking around for a while. They're great to use in any kind of studio or for casual home use.

My only word of advice would be to Konig & Meyer in that they should advertise the "Made in Germany" aspect more as it's definitely a strong point for me and many other consumers!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Very useful and high-quality stuff
Anton Komkov, 18.12.2020
It hold a pair of my headphones and provides quick access to them. It's very comfortable in a bedroom studio.

There are no any complaints about the quality. K&M knows how to make a solid and handy item
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Organized my desktop
Eray Polat, 21.04.2018
I use this headphone holder in my home studio. I do mixing and mastering, and use headphone a lot. However, putting the headphone to its box has been always a problem for me cause it takes time. When i put it on desktop, it really looks messy. So i decided to buy a headphone holder and of course a quality one. That's why i choose K&M. Now, i'm super relaxed of using my headphone. It has place to sit. This is great upgrade for my studio. If you're using the headphone frequently, just buy it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Quality utility
Skipscada, 05.10.2019
Does the job with no problems.
Sturdy and easy to fix on table edge / shelves provided the edge has the necessary free space.
I gave it 4 stars because a more elegant design for the clamp would be nice. It's solid and simple as it is, but it takes up a fair bit of space below the clamping point. That's because it's designed to fit a wide range of dimensions, but in my case it protrudes more than necessary and can sometimes get in the way.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
A home for your headphones
robotom, 15.11.2019
Very useful product for all kinds of studios, it free up space on your desk, and makes it look more tidy & nice. It is is made of good material and well built. Description says up to two headphones, but i am not sure about that, at least my two headphones barely fit on it. Apart from that, i use it now for years, and it is a satisfying headphone holder.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Great for the price
FilipBG, 27.04.2021
Just what I needed, for the desk, it can probably handle 2 pairs of headphones just ok
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Very useful product
FinnGall, 28.01.2020
Great product. Well built, sturdy and very useful to have for headphones if you are converting a regular desk into one for studio usage. K&M are very reliable and an excellent choice for all studio stand choices.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Splendid!
25.03.2015
Build quality feels rock solid, attaches firmly to the desk and fits my two full sized headphones with no problems. I find the smaller notches that were designed to hold earphones to be also very useful for suspending the headphone cable at adequate working length as well as keeping my mobile phone charger cables neatly available as a nice bonus.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Good one!
maajstor, 04.02.2015
I bought two of these for two pairs of headphones. However, this holder is long enough to carry comfortably two pairs of pretty large headphones. I have Audio Technica ATH-M50x and Beyerdynamic DT-800 Pro.
It's adjustable for up to 45mm thick desks, and quality is on K&M level.
Use this holder, it's much better than leaving your pricey hadphones on a desk.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
31.08.2015
Very effective stand, with the notches in the front coming in handy very often.
Only thing I would have like to see is the ability to change the orientation of the mount so that you can mount it to other surfaces but for the price this works great.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Sturdy
James777, 08.01.2015
I bought one of these to replace a cheaper product I'd bought earlier to balance my headphones on. This really solid and feels great. Depending on the width of your headband, you might be able to get a couple of pairs of headphones on your stand. Recommended.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Good build quality
mambomachine, 26.02.2020
Good product, made to last
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Handy Holder
AGillon, 13.09.2020
This holder is actually being used for two purposes.. for my headphones and for my modular cables xD. Does the job very well!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Very reliable
Tasos N, 21.04.2018
Its overall construction is very solid and the shape of the holder is perfect for not harming the headphone soft material.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Have 3 of these
19.12.2016
I've bought 3 of these for my 3 cans. They're easy to set up, they hold well and they look quite alright. I can recommend them if you want to keep your desk tidy.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Very Handy, Andy!
Nick L, 02.03.2015
One of those eminently useful accessories that keeps kit neat and also to hand. Fixed on to my window sill within easy reach of my desk and mixer, sits this well made appendage that hold a broadcast headset and separate set of headphones. I've previously bought a floor mic stand with boom arm by K&M and am delighted by this manufacturers attention to quality and detail. It's a pleasure to surround yourself with quality kit like this!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
K&M 16090 Headphone Holder
Richard4902, 23.02.2015
Very solidly built, quality feel and the thread seems to be cut well.
Enough travel on the clamping arrangement to cope with a 45mm MAX thick table or shelf.
Padding on the top clamp surface to protect against scratching of the table or shelf.

Will take 2 sets of headphones, if they have small ear cups.
I'd say if you have large cups just the one will fit.
On the end is in-ear rest points, nice added extra.

Overall a good product.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Acceptable for price
27.03.2017
This is a very handy addition and helps keep my studio tidy and organised. It's also better for the headphone as it prevents it from being slung around the desk or floor. Works very well for horizontal surfaces (desk) not so well on vertical posts (stand) as there's no way of turning it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
perfect answer to my problem.
22.03.2015
This headphone holder was the perfect answer to my problem as a headphone stand was not an option due to no convenient place to put one. The delivery and service recieve from Thomann was second to none " highly recommend" very pleased with purchase.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Studio headphones holder
15.08.2016
I use this product in my studio, fixed on my desk.
It's very good product and i can fit 2 big headphones on it.

PRO: Good quality.
Cons: I Don't have.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Simple, usefull and very well built
23.09.2015
Superb headphone hanger with sturdy build and material feeling. It even has a protection foam under the top latch to protect your mounting surface. Highly recommend it. I put is on my shelf and works and look perfect.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Good headphone holder
06.12.2015
Needed space on my desktop, while getting a place to put my headsets. Is is very easy to mount and has a little bit of padding, so it won't scratch the table.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Great stand for headphones
Bayrik, 01.05.2018
Thank you ! It?s a beautiful!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report

K&M 16090

12,70 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times

Delivery approx. between Tuesday, 29.06. and Wednesday, 30.06.

Share This Product
Personal Contact
gr
+49-9546-9223-641
2
(2)
Recently Viewed
iZotope Community Appreciation Bundle

iZotope Community Appreciation Bundle (ESD); plug-in bundle; contains 11 essential tools for audio editing and creative music production; consists of Nectar Elements, Neutron Elements, Ozone Elements, RX Elements, BreakTweaker, Stutter Edit 2, Iris 2, Trash 2 as well as Exponential…

4
(4)
Recently Viewed
DSM & Humboldt Simplifier DLX Amp/Cab Sim

DSM & Humboldt Simplifier Deluxe Amp/Cab Simulator; Effects Pedal for Electric Guitar; Pre-Amp, Power-Amp and Cab-Simulator; all Analog 0 Watt Dual Channel Amp, with Cab Simulator, multistage Reverb, and versatile connectivity options; All, in an extremely small format; 2 Studio…

Recently Viewed
Fender SQ Affinity P Bass MN PJ OW

Fender Squier Affinity Precision Bass PJ Olympic White; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: C; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm (1,63");…

Recently Viewed
XAOC Devices Moskwa II

XAOC Devices Moskawa II; Eurorack module; 8 Step Rotosequencer; 8 steps, each with CV control knob and on/off button; for each step programmable functions like slew (portamento), slew probability, gate/trigger probability; up to 8 gate/trigger pattern programmable for each step;…

Recently Viewed
Casio CT-S1WE

Casio CT-S1WE Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

Recently Viewed
Fender SQ Affinity Tele Lake Pl. Blue

Fender Squier Affinity Telecaster Lake Placid Blue; Telecaster Electric Guitar; Affinity Series; Body: Poplar; Neck: Maple; Fingerboard: Laurel; Neck Mount: Bolt-On; Neck Shape: C; Inlays: Pearloid Dots; 21 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 42 mm (1,65"); Scale:…

Recently Viewed
Zhiyun WEEBILL-S Gimbal

Zhiyun WEEBILL-S Gimbal; Three-axis gimbal for DSLR and mirrorless system cameras; simple and safe handling thanks to new algorithms and stronger motors even for fast movements; compact dimensions make the gimbal the perfect companion for reportage and action shots; ergonomically…

Recently Viewed
Zhiyun Smooth Q3 Gimbal

Zhiyun Smooth Q3 Gimbal; professional 3-axis stabiliser for smartphones; integrated fill light with three brightness levels; gesture control and Smart Following for automated tracking of people in the field of view; panorama mode with "Magic Clone" function; ZY Cami app…

Recently Viewed
Blue Microphones Snowball iCE USB Black

Blue Microphones Snowball iCE USB Black; Plug 'n Play USB microphone for recording and podcasting; USB condenser microphone; polar pattern: cardioid; perfect for vocal and music recordings as well as podcasts; frequency response: 40 Hz - 18 kHz; sample rate:…

Recently Viewed
Behringer MIC300 Tube Ultragain

Behringer MIC300 Tube Ultragain; 1-channel tube preamp for Mic and Instrument; hand-selected 12AX7 tube; built-in limiter; 20dB pad; phase reverse switch; +48V phantom power; gain and output volume controls; LED meter; connections: XLR Mic-Input, Instrument-Input 6.3 mm jack balanced, XLR…

Recently Viewed
XAOC Devices Ostankino II

XAOC Devices Ostankino II; Eurorack Modul; expander for Moskwa II sequencer (item 521036); expands Moskwa II with CV inputs for Random Play, Slew, Probability, Transpose, Range, Clock Rate, First Step, Last Step; oputput for the internal clock signal; individual gate…

Recently Viewed
Casio CT-S1RD

Casio CT-S1RD Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.