Göldo Truss Rod Double Dual WS48B

13

Truss Rod for Bass

  • Ingenious dual-action without much space
  • Two mutually working bars
  • The nut sits in a capsule welded to the lower bar
  • If you turn clockwise, it pulls the upper rod against the lower one
  • If you turns counter-clockwise, then the end of the nut presses against the capsule from the inside, thus pushing the rod against the lower one
  • Weight: 200 g
  • Dimensions: 6 x 8.5 x 590 mm
available since November 2005
Item number 187280
sales unit 1 piece(s)
12,90 €
Including VAT; Excluding 19,90 € shipping
Available at short notice (usually 2-5 days)
Available at short notice (usually 2-5 days)

This item has been ordered with our suppliers and should be in our warehouse in the next few days.

Standard Delivery Times
1
P
Give us back the old version!
Prometeus 27.06.2018
Bought a pair of these truss rods as I always used Goldo bars and never had troubles before.
This version, though, is waaaay worse than the old one. The blue "tape" around it comes off easily, but more important, the nut on the end is HUGE, needing a very deep routing. It's also longer than the nut on the older model, so once I found out, I couldn't even go back and use the old version. Bummer. The guy who made these must be a sadist.
quality
2
0
Report

Report

D
Trussrod for bass
Duijnold 21.08.2017
If you buy this you know how to build a guitar....

This is the second truss I buy for my 2nd bass building project. How to evaluate a product like this....

Well,... it seems strong, light and the blue covering will reduce rattle. How it performs over the years remains to be seen.

However, I would like to see more choise in the Thomann catalog. Next project I would like to buy a more vintage style bass truss.
quality
1
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
X
Pratique et universel
XB21 18.05.2011
Truss rod (tige de renfort de manche) d'utilisation simple. Il suffit de l'enfiler dans une gorge de la largeur de la tige, réalisée à la défonceuse au centre du morceau de bois destiné à fabriquer le manche, en creusant un espace légèrement plus large pour le boulon de réglage au niveau de la tête et de ménager un sillon d'accès allant au-delà de cet élément de réglage pour permettre de passer la clé Allen servant à tendre ou détendre le truss rod. Il sera ensuite recouvert par la touche et, en s'appyant sur celle-ci, permettra d'arquer le manche de façon convexe ou concave (modèle double-action).
Pour luthier en herbe ou fabricant confirmé.
quality
1
1
Report

Report

google translate dk
Unfortunately there was an error. Please try again later.
A
Super tysk kvalitet
Anonymous 31.01.2017
Virkelig godt produkt, kører perfekt.

Bruger den i 60'er jazz bas kopier med smal hals profil.
De har en meget smal profil der passer godt til smalle halse hvor der også skal være plads til stål eller grafit stivere.
quality
0
0
Report

Report