Göldo MB05C Adapter Bushings

118

Adapter Bushings for Machine Heads

  • Makes it possible to mount vintage-style machine heads with a shaft diameter of 6.4 mm in a bore hole for enclosed machine heads of 10 mm
  • 6 Pieces
  • MB05C
  • Surface: Nickel
available since July 2006
Item number 193586
sales unit 1 piece(s)
9,90 €
Including VAT; Excluding 19,90 € shipping
In stock
In stock

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Delivery approx. between Monday, 31.01. and Tuesday, 1.02.
1
TO
Great product - Just not the right fit
Tiago Oliveira Coelho 21.07.2020
Bought a set of Klusons for my Classic 60's Tele (MIM) to replace the Kluson-style Ping/Fender stock tuners, but the bushings were too narrow for the pre-existing holes. So I found these conversion bushings and thought my problem was solved.
Before anything, I have to say that they're quite good, and feel very solid. A+ for building quality.

However, the holes for the tuners in my guitar is neither 8mm nor 10mm. If you have the same model as I do, either be prepared to enlarge the holes on the headstock to fit these, or just use aluminium tape on the narrow bushings to keep them in place.
quality
0
0
Report

Report

L
Does not fit all Gotoh locking tuners...
LeonardS 25.05.2021
I bought these to install the Gotoh SD-91-05M MG-T locking tuners as the bushing delivered with the tuners were too small for my Fender to fit well.
However, I can confirm that these Göldo MB05C bushings do NOT fit the tuners either as the diameter, like the Fender ones, are simply too small (narrow).
The Göldo MB05C go well with the other Gotoh SD-91 locking tuners, but for those the Fender bushings fitted as well.
The bushings themselves are ok.
quality
0
0
Report

Report

BC
Goldo adaptor bushings mb05c
Byrnes C 03.06.2020
did the job perfectly great for fitting vintage style tuners into 10 mil holes without messing up the guitar
straight forward fitting
quality
1
0
Report

Report

A
Really Great!
Anonymous 10.05.2016
Very useful items for refitting vintage tuners to "classic" guitars that have had Schallers or similar fitted...or for retro fitting vintage tuners where moder tuners came as stock..
Unless its quite a collectible piece where the original bushings have to go back in these save a great deal of trouble and provide a good fit and support presuming the headstock was properly reamed out previously...
Kudos to Thomann for keeping these presumably low volume sales items in stock,its very helpful!
quality
0
0
Report

Report