174 results. Displaying items 51–75.
The prices shown include VAT. Free Shipping Over 298 €
Compare Added (Remove)
No results were found :-(
One of your filters is filtering so well, that no products were found!
One of your filters is filtering so well, that no products were found!
You can remove your filters and start again or use the previous filter you selected.
DI with Dummy Load & Loudspeaker Simulation A simple solution to capture the warmth and dynamics of your sound without the hassle of removing a speaker during a performance or studio recording, Is connected in place of the speaker...
- A simple solution to capture the warmth and dynamics of your sound without the hassle of removing a speaker during a performance or studio recording
- Is connected in place of the speaker box and provides an 8 ohm load for your tube amp
- Creates a balanced and unbalanced signal that can be connected to recording devices, effects and power amplifiers
Guitar Effect Router Balanced re-amper, XLR in / out, Jack in / out, 2x jack loop in / out, Send and return separately adjustable, Wet / Dry adjustable, 180 ° Phase Invert switchable, Including external power supply 15 V...
- Balanced re-amper
- XLR in / out
- Jack in / out
Guitar DI-Box A special DI box for guitar players. For pre-amplifiers (line signal) or amplifiers. PDI09 enables direct recording of guitar signals into the mixer without a microphone. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be...
- Incl. speaker simulation
- Input: Jack with parallel connector for looping
- Output: XLR / Transformer balanced
Adapter Plug Balanced/unbalanced adapter with transformer, Female XLR to RCA Jack 1:1 - 200R/200R, Colour: Black, coded
- Balanced/unbalanced adapter with transformer
- Female XLR to RCA Jack 1:1 - 200R/200R
- Colour: Black, coded
Effects Pedal Speaker simulator and DI, 12 Speaker algorithms in 4 variations, Controls: Multifunction Control 1, Multifunction Control 2 and Headphone Volume, Switch: Input Gain (0, -20, -30 dB), Current consumption: 150 mA, Power supply via 9 V DC...
- Speaker simulator and DI
- 12 Speaker algorithms in 4 variations
- Controls: Multifunction Control 1, Multifunction Control 2 and Headphone Volume
Active DI Box Size: 19"/1U, 90 mm deep, 4 Channels, XLR output is also available as a parallel port on the back, The active circuitry allows for a high input impedance of 1 Mohm and greater sensitivity of the...
- Size: 19"/1U, 90 mm deep
- 4 Channels
- XLR output is also available as a parallel port on the back
Passive Stereo DI Box Ideal for mobile devices such as mobile phones, laptops, tablets, mp3 players, etc., Input: 3.5 mm Mini-jack plug (stereo) on approximately 1.5 m cable, Outputs: 2x 6.3 mm Jack (balanced) and 1x XLR mono summed,...
- Ideal for mobile devices such as mobile phones, laptops, tablets, mp3 players, etc.
- Input: 3.5 mm Mini-jack plug (stereo) on approximately 1.5 m cable
- Outputs: 2x 6.3 mm Jack (balanced) and 1x XLR mono summed
Hum Eliminator DATI (dual audio transformer / isolater), Frequency range: 10 - 50,000 Hz, Total harmonic distortion (THD): 0.01%, 2 Channels, Inputs: XLR balanced, jack balanced, RCA, Outputs: XLR balanced, jack balanced, RCA
- DATI (dual audio transformer / isolater)
- Frequency range: 10 - 50,000 Hz
- Total harmonic distortion (THD): 0.01%
DI Box Superior phase coherence, Rupert Neve custom transformer, Input headroom of +21.5 dBU, Power supply 48 V phantom power, Ground lift, Instrument and speaker mode for various applications, Connections: in - 6.3 mm jack, thru - 6.3 mm...
- Superior phase coherence
- Rupert Neve custom transformer
- Input headroom of +21.5 dBU
Passive 4-channel DI box Transformer balanced XLR outputs, Input impedance: 68 kOhm, Output impedance: 600 Ohm, Ratio: 10: 1, Max. output: +6 dB, Ground/Lift switch, Format: 19"/1U, 5 Year warranty
- Transformer balanced XLR outputs
- Input impedance: 68 kOhm
- Output impedance: 600 Ohm
Mono Instrument & DI Preamplifier Pure Class A technology, With 6-way EQ, 9.5" 2 RU, Low noise instrument/DI preamplifier, +30 dB variable gain, High frequency filter, High level speaker input, LED signal, Dual microphone and line outputs
- Pure Class A technology
- With 6-way EQ
- 9.5" 2 RU
Direct Input BoxIt often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be...
- Jack input
- Parallel output
- Output impedance balanced
Preamp / Compressor / Limiter / Di Box Tube preamp for mic / line signals with up to 80 dB, 12AX7a Tube, Optical compressor circuit, Phase reverse, Adjustable release time, 48V Switchable phantom power, LED Display for tube drive,...
- Tube preamp for mic / line signals with up to 80 dB
- 12AX7a Tube
- Optical compressor circuit
Tube DI Box Discrete circuit design for uncompromising sound quality, high-quality components, specially manufactured transformers and selected 6N1P tube, Level controls, Ground-lift switch, Input impedance: 1 MOhm, Frequency range: 20 - 60,000 Hz, Maximum level: +22 dBu, Gain range:...
- Discrete circuit design for uncompromising sound quality, high-quality components, specially manufactured transformers and selected 6N1P tube
- Level controls
- Ground-lift switch
Passive Stereo Direct Box with USB High resolution 24bit / 96kHz interface, 2x balanced, low-impedance XLR outputs with ground lift, Output level control with mono switch, Headphone output for easy listening, Noiseless operation, Plug-and-play operation, no driver required, Dimensions:...
- High resolution 24bit / 96kHz interface
- 2x balanced, low-impedance XLR outputs with ground lift
- Output level control with mono switch
Speaker and MIC simulator for guitar and bass Digital processor with EQ and dynamic, Power amp input: max. 150 W RMS, 200 W peak - 4, 8 & 16 ohms, Instrument / Pedal input, Speaker Out for one speaker...
- Digital processor with EQ and dynamic
- Power amp input: max. 150 W RMS, 200 W peak - 4
- 8 & 16 ohms
Passive Stereo Direct Box Suitable for stereo sources such as keyboards and media players, High-impedance 1/4" inputs with thru outputs and 15db pads, Balanced XLR outputs with ground lift, Extremely low noise and distortion
- Suitable for stereo sources such as keyboards and media players
- High-impedance 1/4" inputs with thru outputs and 15db pads
- Balanced XLR outputs with ground lift
Miniature Transformer Balancing Adapters 3-Pin XLR male - jack, Ground lifted, Impedance ratio: 200 : 200, Input / output impedance in Ohms: 200 / 2k (600 / 10k), Max input level (@ 50 Hz, 1% THD) : -3 dBu
- 3-Pin XLR male - jack
- Ground lifted
- Impedance ratio: 200 : 200
Line Isolation Box 2-Channel isolation transformer, Diecast aluminium housing, RCA inputs and outputs, Ideal for suppressing hum loops in hi-fi racks or eliminating light machine noises in the car hi-fi range, 5 Year warranty
- 2-Channel isolation transformer
- Diecast aluminium housing
- RCA inputs and outputs
Passive Mono DI BoxPalmer ADIG-LB is the consistent further development of our legendary speaker simulator PDI03, which has proven itself worldwide in the recording studios and by well-known artists such as Keith Richards / Rolling Stones, Alex Lifeson / Rush,...
- Loadbox: jack input for loudspeaker signal with parallel jack for looping the signal, if a loudspeaker box is to be connected (as monitor in stage operation).
- Input impedance of the load box: 8 Ohm, max. Input power 120 W RMS
- Display of input power: 6-pin LED chain
Bass Preamp/ DI Box/ Switch Matrix Lehle true sound technology, For 2 basses, Input A/ B switch with impedance matching for piezo pickup, Studio grade preamp, 4-Band EQ with double semi-parametric mids, Switchable effects loop with blend/ mix adjustment...
- Lehle true sound technology
- For 2 basses
- Input A/ B switch with impedance matching for piezo pickup
Effect PedalUse your favorite pedals and reproduce their interaction with an amp and speaker, or connect the speaker output of your amp to the Torpedo C.A.B M input and speaker output of the C.A.B M with your speaker for a...
- Speaker Simulation
- 32 Two Notes virtual boxes
- 8 Microphones, 8 power amps and 8 room simulations are already pre-installed
Cabinet Simulator 12 Speaker models based on Engl Boxing Impulse Responses, 4 Memory slots for external IR models via Micro-USB, 4 Power amp models with adjustable presence, 10 Microphone models with different orientations, Separate instrument and Line-In input level,...
- 12 Speaker models based on Engl Boxing Impulse Responses
- 4 Memory slots for external IR models via Micro-USB
- 4 Power amp models with adjustable presence
1-Channel Isolating Transformer Cast aluminum housing, Jack input and output, Ideal for dejamming of guitar racks, 5 year manufacturer's warranty
- Cast aluminum housing
- Jack input and output
- Ideal for dejamming of guitar racks
Miniature Transformer Symmetry AdapterCost-effective solution for unbalanced / balanced line conversion and passive DI applications that do not require grounding and amplifier switching. Typical Applications: • From the output of a DJ mixing console - Amplifier rack (long...
- With transformer
- Male XLR to Cinch phono jack 1: 1 - 200R / 200R - rod.
Offers include 24% Greek VAT and are valid as long as stocks last. Shipping costs to Greece are 20 EUR, free shipping on orders above 298 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Feedback Found an error or want to give us feedback about this page?
We're looking forward to hearing from you and aim to solve any problems as soon as we can.
© 1996–2019 Thomann GmbH Thomann loves you, because you rock!