Stairville M-Fog 1000 DMX Fog Machine

93

DMX Fog Machine

  • The new M-Fog Series is a line of professional fog machines in various power classes
  • All M-Fog machines can be controlled via DMX 512 (3 channels) or simply with the multifunctional remote control (included)
  • The extremely robust body makes the M-Fog machines the perfect source of artificial smoke on stage and on tour as well as in clubs or discos
  • Suitable case: Art.383588 (not included in delivery)

Technical data:

  • Power of heating element: 1,000 W
  • Warm-up period: approx. 4 minutes
  • Fluid tank contents: 2 l
  • Fog emission: approx. 240 m³ / min.
  • Control: DMX-512 (3 channels)
  • Detachable multifunctional remote control - Cable length: 2.70 m, not extendable
  • Safety switch for fog fluid
  • Electronic temperature control
  • Power supply: 230V AC 50 Hz
  • Fuse: 6 A
  • Total power consumption: 1.000 W
  • Dimensions: 415 x 234 x 227 mm
  • Weight: 5 kg

Note: this machine is intended for use with original Stairville fluid only:

Available since May 2015
Item number 355877
Sales Unit 1 piece(s)
Power 1000 W
DMX Control Yes
Output direction horizontal
with timer remote Yes
with On/Off cable remote No
with radio / IR - remote No
with light effect No
Battery operated No
Fluid consumption [ml/min.] 35 ml
Incl. Mounting Bracket No
Fog Output [m³/min] 240 m³
£145
Including VAT; Excluding £10 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
Delivery approx. between Wednesday, 3.04. and Thursday, 4.04.
1

Plenty of output

The Stairville M-Fog 1000 DMX Fog Machine chalks up some impressive performance data when it comes to speed, and its high fog output is also remarkable. It is a medium-sized model for medium-sized stages and projects white haze onto the scene with a degree of efficiency that is astonishing at this affordable price point. For ease of operation, it has a small control panel that, if necessary, can be detached from the housing and then transformed into a wired remote control. Alternatively, the unit can be controlled via DMX. It is simply placed in an upright position, and the fog is diffused horizontally into the room. An extensive range of fluids are available to choose from: Whether you want morning haze or Industrial Rock - the Stairville M-Fog 1000 DMX fog machine will provide a realistic backdrop for the performance.

Help yourself

The Stairville M-Fog 1000 DMX Fog Machine delivers 1,000 watts of power. After a warm-up period of just four minutes, an impressive output volume of 240m³/min is available on the stage. To create a slightly upward-swirling haze, the unit can be placed at an angle of up to 15°. The tank has a capacity of two litres which, at average usage, will last for several concerts with a single filling. The power supply is provided via a hardwired standard power cable. A DMX signal can be transmitted in and out via two three-pin XLR sockets. The corresponding address is assigned using the DIP switches on the back, or you can use the removable control panel, whose non-extendable cable is 2.7 metres long. This allows performers to activate the fog by themselves while on stage. Once warmed up, the fog machine, which weighs 6kg, is ready to go again after a short reheating time of six seconds.

Need fog in a hurry?

The Stairville M-Fog 1000 DMX Fog Machine is primed for traditional fogging applications. Operators of small and medium-sized stages get a fog machine that is not only up and running quickly, but also delivers a generous output. Beginners can handle the control panel without prior knowledge, consisting as it does of just three knobs and a switch. Professionals working in live clubs and theatres can control the fog volume, the distance between two impulses, and the duration of each output via DMX with three channels. Owners of multi-purpose stages will find the right fluid for every application among the numerous optionally available products, while rental companies and bands who want to take a fog machine along on tour can transport it safely in an optionally available flight case.

About Stairville

Since it was introduced in 1994, Thomann’s in-house brand Stairville has been a permanent fixture in the store’s product range. The brand primarily focuses on the field of stage lighting in general, and its products include spotlights, moving lights, and theatre lighting as well as smoke machines, electronic control systems, and every other accessory you can think of. Thomann constantly has around 1,600 Stairville products on offer, and the figures speak for themselves: Statistically, one in every fifteen Thomann customers owns at least one Stairville product. Incidentally, the name “Stairville” is also a catchy English translation of “Treppendorf”, the town that Thomann calls home.

Unleash some white mist

Connect, heat up, and get the fog going - it's as simple as that. With the Stairville M-Fog 1000 DMX Fog Machine, you can choose the fluid that suits the occasion best - there are five to choose from. If you are looking for an effect that quickly disappears into thin air, choose the Stairville Fast Fog. The lightweight Stairville E-M has particularly good reflection properties, while the Stairville E Special is characterised by a medium density perfect for light and laser design. If you want to immerse a stage in long-lasting morning haze, use the Stairville E-C, and if you want a particularly dense November atmosphere, the E-HD fog fluid will fit the bill. Every tank is empty at some point, so the Stairville M-Fog 1000 DMX Fog Machine features a corresponding LED indicator on the housing. If it lights up red, a refill is required. When the tank is full, the LED goes out after the unit has been switched off and on again.

93 Customer ratings

4.3 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

amount of fog

55 Reviews

H
Good for basic productions
Hdawg 13.10.2020
Have used these for a few years now. They do the job well and provide a good amount of Fog. Look after them and ensure you clean them out with the correct cleaner if you are going to store them for a period of time.
quality
amount of fog
0
0
Report

Report

BK
Far exceeds expectations.
Bionic Knee 03.08.2017
I have come across many smoke machines, including some around this price point. Most of them have been a dissapointment! Not this one!

This was used for the first time in a barn, capacity 250-300 and very draughty. Situated with a fan in front and being controlled by DMX we were able to fill the barn with fog using only 2 or 3 short burst of about 3 seconds each.

Great performance, quality and the usual Thomann service.

HIghly recommended!
quality
amount of fog
0
0
Report

Report

M
Its good machine
M1tsos 07.01.2020
The machine is very good and economical we had a problem with the dmx it was sending the signal but the smoke didnt come out.. we contact the very good thomann team.. and they send a new one immediately.. untill the new machine arrive i used it manualy and i am very satisfied from the product compared the price... i hope the new Takes the dmx signal and will work properly
quality
amount of fog
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
Ea
Preis-Leistung super, innere Werte.... bitte lesen :-)
Erich aus S. 15.11.2021
Ich habe die Maschine nun eine Weile, und weil ich ein alter Murkser bin, hab ich diese mittlerweile auch schon aufgeschraubt, um die "inneren Werte" zu sehen. Ich habe seit einigen "Jahrzehnten" so meine Erfahrung mit verschiedenen günstigen und mittelpreisigen Nebelmaschinen gesammelt.
Letztendlich funktioniert so ne Maschine ja mit 3 grundlegenden Bauteilen: Verdampfer, Pumpe, Steuerung.

Zum Verdampfer der M-Fog 1000 kann ich nicht viel sagen... außer dass er relatiev klein wirkt, was dann auch zur kurzen Aufheizzeit passt und auch zur recht kurzen Nachheizzeit. Angesteuert wird der Heizer offensichtlich über ein Relais auf der Steuerplatine.... wie lange das hält, wird die Zukunft zeigen. Während dem Nebeln geht zumindest die Heizung schon mal an bevor die Mindesttemperatur für den Nebelbetrieb unterschritten ist, was wohl erstmal gut ist.
Es ist ein 3,5mm (Außendurchmesser) Edelstahlrohr von der Pumpe ab durch den Verdampfer gelegt, ohne extra Düse (Querschnittreduzierung) am Auslass. Das taugt erstmal... ich habe auch schon stinkende Verdampfer aus Eisen gesehen, die dann innen schön zu rosten begannen.... das is aber schon lange her.

Zur Pumpe kann ich schon mehr sagen. Es ist eine kleine Sankyo SMP Pumpe mit 20Watt verbaut. Diese kann man immerhin zerlegen, was langfristig von Vorteil sein kann, denn man kann sie dann reinigen, und ggf. möglicherweise aufgequollene O-Ringe können gewechselt werden. Man sollte bedenken, diese Pumpen (ob Ulka oder Sankyo) werden alle für Kaffeemaschinen gebaut, und sind erstmal eigentlich nicht für Nebelfluid gedacht.... ich weis nicht, ob die Nebelmaschinenhersteller irgendwelche anderen (geeigneteren) Oringe verbauen... vermutlich aber eher nicht. Die Pumpe kann man also reinigen... wechseln würde eigentlich auch gehen, wenn man denn einen Ersatz kaufen könnte, was eher schwierig erscheint. Immerhin, es gibt eine Pumpe für eine ADJ Nebelmaschine die sieht baugleich aus.... kommt aber auch aus dem Ausland (wenn sie denn kommt).

Zur Steuerung... und das ist auch letztendlich mein Begewggrund, eine Rezension zu schreiben:
Ich muss zugeben, dass ich die Funktionalität der DMX Steuerung nicht wirklich verstehe..... es werden 3DMX Kanäle genutzt (mir würde einer genügen!) ... es gibt Volume, NebelDauer und NebelPause eines .... aber wenn ich an den Kanälen 2 und 3 etwas verändere, dann kann ich die Reaktion der Maschine nicht wirklich nachvollziehen.... von einigen Sekunden Pause oder Nebeldauer kann ich da nichts erkennen... man hört zwar dass die Pumpe dann "stottert"... aber ich versehe nicht wirklich was da passiert. ABER... das brauch ich ja quasi eh nicht, den das kann eine halbwegs anständige DMX Steuerung ja auch selber regeln ;-)

Verwende ich nur den Kanal 1 dann Pulst die Pumpe (kurze Pulszeiten) bei niedrigen DMX-Werten (was ich eigentlich garnichtmal so schlecht finde denn dann kann man auch tatsächlich ab DMX Value 11 mit geringem Nebelausstoß rechnen.) und läuft zunehmend kontinuierlich bei höheren DMX Werten.
Dieses Verhalten ist tatsächlich anders als bei der Steuerung per Fernbedienung. Hier regelt der Volumeregler scheinbar die Versorgungsspannung der Pumpe..... Dauer und Pause scheinen dann auch korrekt zu funktionieren.

Zum "Rest".. wie Gehäuse, usw. :
Das Gehäuse ist "funktional"... aus Blech... etwas ungünstig finde ich den Griff (der je nach Befüllung nicht über dem Schwerpunkt der Maschine liegt).... das sollte aber auch kein Problem sein. Besonders stabiel ist das Blech tatsächlich nicht... aber das juckt mich selber eher kaum, solange dadurch nix im inneren kaputt geht. Schraubt man das Oberteil ab, dann merkt man wie "wabbelig" das Gehäuseunterteil tatsächlich ist.

Die Pumpe ist direkt am Gehäuseboden verschraubt (ohne Dämpfungsgummi oder ähnliches)... wesshalb sie manchmal (je nach Betriebsart) relatiev laut ist, ABER... Nebelmaschinen sind eh nie besonders leise, also was solls.

Fazit: Günstige Nebelmaschine, die tut was sie soll, und die auch "Reparaturpotential" hat..... zumindest falls die Pumpe mal nicht gehen sollte :-) Ich finde das Preis-Leistungsverhältniss angemessen.

Ergänzung: beim letzten Gig, hat die Nebelmaschine "gestreikt"... es kam immer nur ein Schwung Nebel, und dann nix mehr.. die Pumpe brummte dann lauter, aber es kam nix.
Mittlerweile kenn ich den Grund (der extrem simpel ist).... der Messing-Sinter Filter im Fluidbehälter war arg oxidiert (grünspahn), und daher verstopft. Es kamm wohl zu wenig Fluid nach. Neuer Filter ist schon bestellt.
quality
amount of fog
1
0
Report

Report