Rockboard Pedalboard w. Gig Bag TRES 3.2

Pedalboard for Effects Devices

  • For approx. 7 to 12 effects pedals (depending on size)
  • Torsion-resistant, lightweight aluminium construction
  • Slot design for easy pedal attachment
  • Mounting holes on both sides for RockBoard LED Light (not included)
  • Made from 1 cold-rolled aluminium sheet
  • Additional stiffening via U-shaped support strut
  • Completely flat, 10° angled board surface - no welds
  • Slot for RockBoard Module Patchbays
  • Robust black powder-coated surface
  • Dimensions (W x D x H): 598 x 234 x 37 - 71 mm including rubber feet
  • Weight: 1.3 kg
  • Includes self-adhesive hook tape (50 mm wide) and loop tape (25 mm wide) and cable ties

Includes gigbag:

  • Internal dimensions (W x D x H): 650 x 260 x 120 mm
  • Weight: approx. 1.6 kg

Note: Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.

Note: Register your purchase at www.w-distribution.de/Warranty for an extended warranty of 4 years.

Further Information

Number Of Effects 12
Incl. power supply No
Effect Send/Return No
Incl. Gigbag Yes
Incl. Case No
8 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 /5
  • handling
  • quality
Total
handling
quality
A little more work for R&D dept.
Lechum, 01.10.2020
I received this product a couple of days ago. Quality is good, however there are a couple of negative points to raise. First, I was very disappointed to find that my Harley Benton PowerPlant (Thomann item 119603) was too deep to fit underneath the unit. Looking at the dimensions of alternative power supplies for pedals, it seems that only those with a separate transformer will go under the unit. This makes the 3-pin plug/socket on the various Rockboard MOD connection organizers of no use. Perhaps Thomann should put on the product details for the power packs which Pedalboards they are compatible with. End result is that I had to get another power supply.
I contacted Rockboard direct, and they were very understanding, and said that the larger pedalboards that can hold 2 or more rows of pedals can accommodate large power supply units underneath, because the height from the ground increases accordingly. They also told me that ALL of the 1/4 inch jack connectors on the MOD 1 are STEREO, so for example, you can put a twin button amp footswitch through it, thus making everything much neater.
Secondly, the two pre-drilled holes on the board to accept the MOD 1 are not big enough to take the attachment bolts! So I had to make them larger; these holes are too close to the additional supports, so it is very a awkward job to attach the MOD 1. After a half-day's work I manged to get it all sorted, and the unit houses my pedals firmly and attractively. It looks professional, but in my opinion is a bit overpriced.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Good first pedalboard upgrade
T.J., 14.02.2021
Since I've been buying some extra pedals, my former pedaltrain nano+ became a bit small to fit everything.
I was therefore looking for a knew solution, with a bit more space, but no overkill, to end up with a lot of open space on the knew one.
For me the TRES 3.2 seems the correct size for my current needs.
I chose Rockboard over Pedaltrain this time, since it appeared to be easier to hide cables, due to the fact that there are more rows of smaller holes. Especially good, since every pedal has its own positioning of connections.
You can fit two rows of pedals on top of each other, but only if you only own pedals that have "normal" dimensions. (For example, I have a TC Electronics Fangs and these are too big to fit two of this on top of each other).
In depth it could have been a bit longer for me, it would create a bit more space in between two pedals, but the QUAD, comes in with too much extra I think.
With the pedals close to each other, especially if you place a higher model on the first row, you hit it, when switching on a pedal of row two.
BUT it gave me the idea of actually keeping my Nano+ pedal. I fitted this with velcro as a higher second row, like you see with the big, expensive pedalboards. In this way the second row is a bit higher and you can switch the pedals on and off without problem.
I can fit 10 normal sized pedals on the board on the width of the Nano, so this gives mee two rows of 10 normal sized pedals. Next to this there is enough space to fit an expression pedal, since the TRES 3.2 and the Nano have different widths.
Further on, the Rockboard have many possible options, such as the tray, the patch bays, etcetera.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
it Original review (Show translation)
Unfortunately there was an error. Please try again later.
Total
handling
quality
Great product
Fariels, 05.11.2020
Very useful support to start building a pedalboard. Highly recommended for all the players who are searching a solid and sturdy base to organise their effects.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
de Original review (Show translation)
Unfortunately there was an error. Please try again later.
Total
handling
quality
Robustes Profi Ausrüstung
Ozi Mike, 30.04.2020
Sehr stabiles Verarbeitung das Pedalboard selbst, die mitgelieferte Tasche scheint auch recht gut verarbeitet zu sein. Flexibles Layout also es passt eine Power Block darunter und in Kombination mit die Rockboard Mod's wird das wirklich zu eine Profi teil.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
£83
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Online Guides
Racks & Cases
Racks & Cases
If you take good care of your equipment, your pack it up carefully - and this means getting a proper case!
 
 
 
 
 
test results:
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.
11
(11)
Recently Viewed
Harley Benton SC-550 II DFB

Harley Benton SC-550 II Desert Flame Burst; deluxe series; electric guitar; mahogany body (swietenia meliaceae) (weight relief chambered); arched & flamed AAA-maple top; set mahogany neck (swietenia macrophylla king); pau ferro fingerboard; 60`s neck profile; 305mm (12,00") fingerboard radius; 1th…

Recently Viewed
Kali Audio IN-8 2nd Wave

Kali Audio IN-8 2nd Wave; Active near field monitor; 3 way system with coaxial midrange/tweeter; 8" woofer; 4" midrange; 1" soft dome tweeter; power: 140 Watt (60/40/40 Watt Tri-Amped); frequency range: 37 Hz - 25 kHz (-10 dB), 45 Hz…

5
(5)
Recently Viewed
SSL UC1

USB DAW Controller Plug-in controller with convenient mixer layout and legendary SSL workflow, 1:1 Hardware control for the included SSL plug-ins Channel Strip 2 and Bus Compressor 2, Visual feedback via LED rings on the knobs, Display for showing…

Recently Viewed
Novation Circuit Rhythm

Novation Circuit Rhythm; sampler / sequencer; 8 sample tracks with 32 step patterns each, cascadable for up to 256 steps per track; functions: slice, reverse, loop, chromatic play, probability and pattern-mutate; integrated effects such as lofi tape, shutter, reverb, delay…

1
(1)
Recently Viewed
Arturia Keystep 37 Black Edition

Arturia KeyStep 37 Black Edition; 37-key (slimkey) USB controller keyboard; velocity-sensitive mini-keys with aftertouch; 64-step sequencer; chord and scale functionality; arpeggiator; LED display; 4 freely assignable knobs; transport keys; touch stripes for pitch and modulation; RGB LED bar; connections: 3x…

Recently Viewed
Fender SQ Aff. P Bass MN PJ PACK BK

Fender Squier Affinity P Bass MN PJ PACK Black; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: c; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm…

Recently Viewed
Wampler Gearbox Dual Overdrive

Wampler Gearbox Dual Overdrive; Effects Pedal for Electric Guitar; Andy Wood Signature Pedal; features modified versions of two of Brian Wampler’s best loved drive Circuits: Channel 1 based on the Tumnus and Channel 2 based on the Pinnacle; top-switchable Stacking…

Recently Viewed
Gravity LTST 01

Laptop stand with adjustable holding pins Steel tray, Powder-coated tubes made of aluminium, Die-cast aluminium base, Dimensions of the tray (W x H): 480 x 330 mm, Tube diameter: 35 mm, Height adjustment by adjusting screw with holding pin…

1
(1)
Recently Viewed
Sennheiser CX True Wireless Black

Sennheiser CX True Wireless Black In-Ear headset headphone - 7 mm hight end drivers, bluetooth 5.2, up to 9 h running time, up to 27 h with charging case, SBC, AAC, aptX Codec compatible, 110 dB SPL (1 kHz /…

3
(3)
Recently Viewed
Harley Benton SC-550 II PAF

Harley Benton SC-550 II Paradise Amber Flame; deluxe series; electric guitar; mahogany body (swietenia meliaceae) (weight relief chambered); arched & flamed AAA-maple top; set mahogany neck (swietenia macrophylla king); pau ferro fingerboard; 60`s neck profile; 305mm (12,00") fingerboard radius; 1th…

Recently Viewed
J. Rockett Audio Designs Clockwork

J. Rockett Audio Designs Clockwork; Analogue stereo delay with switchable modulation; Designed in collaboration with Howard Davis (creator of the original "Deluxe Memory Man"); Classic analogue design with BBD chips; Tap-tempo control digital; Up to 600 ms delay time; Switchable…

Recently Viewed
Fender SQ Aff. P Bass PJ PACK 3-SB

Fender Squier Affinity P Bass PJ PACK 3-Color Sunburst; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: C; Fingerboard: Laurel; Inlays: Pearloid Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.