Rockbag Fingerboard Saver 1 narrow

Fingerboard Saver for Thin Fret Wire

  • Protects the fretboard during crowning, filing or polishing of the frets
  • Fits on most thin fret wires
  • Fits between all frets on guitars, banjos and electronic basses
  • Fits between most mandolin and ukulele frets
  • Slot widths: 1.8 mm (0.071")
  • Slot length: 70 mm (2.76") - also fits most 5-string basses
  • Notches for fixing with included rubber bands on the neck
  • Made from flexible 0.2 mm (0.008") stainless steel
  • Adapts to the fingerboard radius
  • Dimensions (L x W): 80 mm (3.15") x 16 mm (0.63")
  • Set of 2 pieces including rubber bands

Further Information

Size Small
Amount 2
26 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 / 5.0
  • quality
11 written ratings Read all reviews
Total
quality
?Simple thing, tricky to ues
Alfred Kyy, 17.02.2020
This does the thing it should do; protects your fingerboard when filing or polishing your frets.

The hard part is use rubber bands to hold it on its place. I usually end up holding it by hand instead of using rubber bands. Holding this is easier if you add some duct tape to sides to make it a bit bigger and easier to hold.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Rockbag Fingerboard Saver 1 narrow
Gammamaster, 30.12.2017
Rockbag Fingerboard Saver 1 narrow
Previously I have used the Göldo WS045 Fretboard Guard which measures approximately 80mm x 22mm with a slot that measures approximately 3 mm x 69 mm.
I found the Göldo slot to be too large and so I thought I would try the Rockbag version.
To start with the Rockbag actually contains two guards along with a couple of elastic bands to hold them in place.
The Rockbag fingerboard savers are available in three sizes, this is the narrow version.
The guard measure approximately 80mm x 60mm with a slot that measures approximately 70mm x 1.8mm
The guards are very neatly cut out from 0.2mm thick stainless steel with no obvious rough edges to worry about.
The slot is very narrow and I found it was too narrow for most of my guitars, certainly too narrow for any of my Gibson and most of my Fenders.
It only fitted two Japanese fenders, (a FSR competition stripe mustang and a '62 custom telecaster) both with really narrow vintage style frets.
The guards work well, much better than the Göldo guard and I will be ordering the two other sizes as soon as possible as they are very useful.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
£2.80
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
(1)
Recently Viewed
Modal Argon8

Wavetable synthesiser 8-Voice polyphonic, 37-Key velocity sensitive keyboard (FATAR TP9 / S) with aftertouch, 120 Wavetables divided into 24 banks of 5 morphable waveform sets, 28 Static wavetable processors, 32 Wavetable oscillators, 4 Per voice with 8 types such...

(1)
Recently Viewed
Rode VideoMic NTG

Rode VideoMic NTG; On-Camera Shotgun Microphone; Highly directional supercardioid polar pattern; Convenient cold shoe mounting on camera; Frequency response: 35 Hz – 20 kHz (±3 dB); High sensitivity: 50 mV, SPL: 120 dB; Peak warning light; -20 dB Pad switch;...

(1)
Recently Viewed
Soundbrenner Core

4-in-1 Smart music tool in clock format 4 Functions: Watch, vibrating silent metronome, magnetic tuner and decibel meter, You always have your tools with you, whether you're practicing at home, recording in the studio or even performing on stage.,...

Recently Viewed
Varytec Colors SonicStrobe

Varytec Colors SonicStrobe; LED stroboscope with ambient effect; Over 200 SMD 5730 LEDs provide bright and dynamic strobe and blinder effects; In addition, more than 140 SMD5050 RGB LEDs provide color accents in the background; special surface of the reflectors...

Recently Viewed
Varytec Colors StarBar 12

LED Bar With 12 warm white beam LEDs and 12 RGB segments, Ideal as an eye catcher on the stage and in discos, Light and robust construction, Subdued grey soft frost cover Technical Data: Light source:...

(1)
Recently Viewed
Epiphone Les Paul Custom Ebony

Electric Guitar Body: Mahogany, 5-Way body binding, Neck: Mahogany, Fretboard: Ebony, Pearloid Block fretboard inlays, Neck profile: SlimTaper, Scale: 629 mm (24.75"), Nut width: 43 mm (1.693"), 22 Frets, Pickups: ProBucker 2 (neck) and ProBucker 3 (bridge) humbuckers, 2...

Recently Viewed
NEO Instruments micro Vent 122

NEO Instruments micro Vent 122; emulation of a Leslie 122; perfect for guitar, organ and keyboard signals; two selectable speeds (Speed1 continous, Speed2 Slow/Stop/Fast); Variable microphone to rotors distance; true bypass; 6.3mm jack input and output; dimensions: 113x 65x 47mm;...

Recently Viewed
Rockboard Pedalboard w.Gig Bag DUO 2.2

Rockboard Pedalboard with Gig Bag DUO 2.2; pedalboard for effects pedals; for approx. 5 to 9 effects pedals (depending on size); sturdy and light aluminum construction; slotted design for easy pedal mounting; mounting holes for RockBoard LED Light (not included)...

(2)
Recently Viewed
Harley Benton TUBE5 Celestion

Tube Combo for Electric Guitar 1 Channel, Power: 5 W / 1 W, switchable, Preamp tubes: 1x ECC83 / 12AX7, Power tubes: 1x 6V6GT, Equipped with 8" Celestion Super Speaker, Controls: Volume - Tone, Switch: Power - Attenuator 5...

Recently Viewed
Walrus Audio MAKO D1

Walrus Audio MAKO D1; effect pedal; Digital Stereo Delay Pedal; For live and studio applications; Stereo input and output; 5 delay programs: Digital, Mod, Vintage, Dual, Reverse; "Digital": transparent delay e.g. for rhythm guitar; "Mod": random pitch modulation of the...

Recently Viewed
Quilter Phantom Block Pre Amp/Cab Sim

Quilter Phantom Block Pre Amp/Cab Sim; Pre Amp & DI for Electric Guitar; the high impedance input gets optimum tone from standard passive pickups, the Gain goes from clean to overdrive, a wide range Tone covers the most popular sounds...

Recently Viewed
Epiphone Les Paul Custom Alpine White

Electric Guitar Body: Mahogany, Neck: Mahogany, Fretboard: Ebony, Pearloid Block fretboard inlays, 5-Way body binding, Neck profile: SlimTaper, Scale: 629 mm (24.75"), Nut width: 43 mm (1.693"), 22 Frets, Pickups: ProBucker 2 (neck) and ProBucker 3 (bridge) humbuckers, 2...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.