Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands

  • For near-field monitors
  • Panel surface: 23 x 23 cm
  • Height adjustable from 93 - 115 cm
  • Load bearing capacity up to 45 kg
  • Length of each side of base 45cm
  • Weight: 7.9 kg per piece
  • Colour: White
  • Set of 2 in a box

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium BS-500 WH Set
43% bought this exact product
Millenium BS-500 WH Set
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
€48 Add to Basket
Millenium BS-500 Set
24% bought Millenium BS-500 Set €48
Gravity SP 3202 Studiomonitor Stand
8% bought Gravity SP 3202 Studiomonitor Stand €40
Millenium Desktop Monitor Mount DM1
5% bought Millenium Desktop Monitor Mount DM1 €14.50
Millenium Desktop Monitor Stand DM2
5% bought Millenium Desktop Monitor Stand DM2 €17.50
Our most popular Studio Stands
121 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.1 / 5.0
  • quality
77 written ratings Read all reviews
Total
quality
Stay away. Frankly.
Samum BeatZ, 27.03.2018
I do not understand the positive reviews on this product. For once I regret my purchase and they leave right away to the sender.

Be clear and honest, it's fun equipment.
The trays are not rights at all. (See photo) Normal, the hole for the screw is not centered in the case of bending at the center of the plates. So you either have speakers that lean or they are directed to the floor / ceiling. Too well. Not to mention the impact on the stability of thing.

Stability, talk is relative. Flicking enough to overthrow all even if the height is at a minimum. I can not imagine if we want to perch his pregnant 1.80m. Both fit on a wire in balance, it will come back to the same.

Another detail: the screw at the junction of the two tubes of one of the feet runs idle. Just because he did not think a system to tighten the nut behind. May Day.

It's ultra cheap material, poorly done, poorly thought out. End of story. Its low cost does not excuse such construction defects.

i forgot. one of stand painted very bad. i so afraid. one day my speakers will crushed.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
airquaker, 29.05.2019
I use them for my Yamaha HS 5
That's ok, but there is a little bit bigger than required (the plate for the monitor) and no cable channel inside.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Millenium BS-500 WH Set
(121)
Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm,...

  • Type: Monitor Stand
  • Height min.: 830 mm
  • Height max.: 1150 mm
  • Weight: 7,9 kg
Millenium BS-500 Set
(3839)
Millenium BS-500 Set

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 45 kg, Length of triangular base: 45...

  • Type: Monitor Stand
  • Height min.: 830 mm
  • Height max.: 1150 mm
  • Weight: 7,9 kg
Gravity SP 3202 Studiomonitor Stand
(132)
Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors Massive cast-iron foot, Black powder-coating, Load capacity: 50 kg, Pipe diameter: 42/35 mm, Height adjustable from 900 - 1500 mm, Dimensions shelf: 250 x 250 mm, Weight:...

  • Type: Monitor Stand
  • Height min.: 700 mm
  • Height max.: 1500 mm
  • Weight: 6,5 kg
K&M 26740
(78)
K&M 26740

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

  • Type: Monitor Stand
  • Height min.: 895 mm
  • Height max.: 1370 mm
  • Weight: 10,6 kg
K&M 26754
(8)
K&M 26754

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

  • Type: Monitor Stand
  • Height min.: 800 mm
  • Height max.: 1300 mm
  • Weight: 10,2 kg
Millenium BS-1100
(171)
Millenium BS-1100

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces, Height: 740 - 1140 mm, Dimensions of the supporting...

  • Type: Monitor Stand
  • Height min.: 740 mm
  • Height max.: 1140 mm
  • Weight: 4,0 kg
K&M 26791 Design Monitorstativ
K&M 26791 Design Monitorstativ

K&M 26791 Design Monitorstativ, Stahl-Stativ for Monitore, standfester, formschöner Guss-Sockel 480 x 480 mm, groß dimensionierte Rohrkombination, stufenweise höhenverstellbar mittels Rast- und...

  • Type: Monitor Stand
Zaor Stand Monitor Cherry Black
(6)
Zaor Stand Monitor Cherry Black

Monitor Stand Isolation of the loudspeaker calibration by means of AERstop Pad on the upper platform, Adjustable height, Material: Mixture of solid wood and melamine resin coated chipboard, Load...

  • Type: Monitor Stand
  • Height min.: 800 mm
  • Height max.: 1150 mm
  • Weight: 20,0 kg
Genelec Z8000-409B Floor Stand
(21)
Genelec Z8000-409B Floor Stand

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

  • Type: Monitor Stand
  • Height min.: 895 mm
  • Height max.: 1370 mm
  • Weight: 10,6 kg
Millenium BS-2800
(110)
Millenium BS-2800

Monitor Stand With a stable tripod, Made from steel, Height adjustment using clamping knob and safety splint, Plate: 205 x 245 mm, Height: 68-114 cm, Colour: Black, Weight: 4.5 kg, Made in Germany

  • Type: Monitor Stand
  • Height min.: 680 mm
  • Height max.: 1140 mm
  • Weight: 4,5 kg
Zaor Miza Stand V42 Black
(4)
Zaor Miza Stand V42 Black

Monitor Stand (Pair) High-quality monitor stand made from melamine resin coated chipboard, Simple and modern design, Vibration levels are kept to a minimum, Fixed height: 1071 mm, Stand and support...

  • Type: Monitor Stand
  • Height min.: 1071 mm
  • Height max.: 1071 mm
  • Weight: 40,0 kg
€48 £42.70
Including VAT; Excluding €10 shipping

The price in GBP is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
 
 
 
 
 
test results:
Offers include 20% UK VAT and are valid only whilst stocks last. Delivery to the UK costs 10 EUR (approx. £9), free shipping on orders above 149 EUR. Please click here for more on international delivery costs and times. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(1)
Recently Viewed
Rode Wireless GO

Rode Wireless GO; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20 kHz...

(1)
Recently Viewed
IK Multimedia UNO Drum

IK Multimedia UNO Drum; analog/PCM drum machine; 6 true analog voices for kick, snares, claps, and hi-hats; 12 PCM voices with 54 samples; freely layer analog & PCM sounds with 11-voice polyphony; editable drum sound parameters like level, tune, decay...

Recently Viewed
Native Instruments Komplete Audio 6 MK2

6-Channel Audio Interface 24-Bit / 192 kHz, 2 Mic/Line/Instrument Combo Inputs: XLR/jack 6.3 mm, 2 Line inputs: 6.3 mm Jack, 4 Line outputs: 6.3 mm Jack DC-coupled, S/PDIF input coaxial, MIDI input and output, 2 Stereo headphone outputs: 6.3...

(3)
Recently Viewed
TC Electronic Polytune 3 Noir

TC Electronic Polytune 3 Noir; Effects Pedal for Electric Guitar; compact polyphonic tuner/buffer, tuner in effectpedal size, Bonafide buffer circuitry preserves your tone through long cable runs and multiple effects, polyphonic tuning - tune all strings simultaneously, fast chromatic tuner...

Recently Viewed
K&M 21427

K&M 21427, professional carrying case for 6 microphone stands, includes castors for easy and comfortable transport, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, castors included, dimensions:...

Recently Viewed
RCF Art 312 MK III

RCF Art 312 MK III - full range passive speaker, 12"/1", 300W, 90x70° 12" woofer and 1" driver with 1.5" Mylar diaphragm, 8ohm, 127dB max, Speaker Twist in/out, plastic housing, pole mount adapter, 4 x M10-Flying points and 3 handles,...

(1)
Recently Viewed
Jazzlab saXholder PRO

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

(2)
Recently Viewed
Harley Benton Custom Line Thunder 99

Guitar Power Amplifier in Pedal Format Compact power amp pedal for electric guitar, For direct connection to any preamp, pedal or effects unit, Power: 2 x 50W to 4 ohms, For 4 - 16 ohm speakers, Master volume controller,...

Recently Viewed
J. Rockett Audio Designs The Dude V2

Effect pedal for electric guitar Overdrive, Delivers classic D-Style ODS sounds and feel, Less aggressive volume controller than previous version, True bypass, Controls for Level, Ratio, Treble and Deep, Bypass footswitch, Input / Output: 6.3mm mono jacks, Metal housing,...

Recently Viewed
K&M 21316 Select

K&M 21316 Select, large carrying case for speaker and hand crank stands, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, dimensions: 1200 mm, weight: 2,1kg, colour: black

Recently Viewed
Jazzlab saXholder PRO XL

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

(1)
Recently Viewed
the t.bone free2b

the t.bone free2b, microphone wireless system, 2.4 GHz wireless plug-on microphone system for dynamic mics, without phantom power, plug-n-play XLR transmitter & receiver, 2.4 GHz band, 32 bit / 48 kHz hi-resolution audio quality, 6 channels, transmission range up to...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.