Millenium BS-500 Set

Set of Height Adjustable Monitor Stands

  • For near-field monitors
  • Panel surface: 23 x 23 cm
  • Height adjustable over several steps from 93 - 115 cm
  • Maximum load: 45 kg
  • Length of triangular base: 45 cm per side
  • Weight: 7.9 kg
  • Set of 2 in a box

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium BS-500 Set
61% bought this exact product
Millenium BS-500 Set
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
£35 Add to Basket
Millenium Desktop Monitor Stand DM2
5% bought Millenium Desktop Monitor Stand DM2 £15.40
Millenium BS-500 WH Set
5% bought Millenium BS-500 WH Set £34
Gravity SP 3202 Studiomonitor Stand
4% bought Gravity SP 3202 Studiomonitor Stand £41
Millenium Desktop Monitor Mount DM1
4% bought Millenium Desktop Monitor Mount DM1 £15.40
Our most popular Studio Stands
5064 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.3 /5
  • quality
Total
quality
9 years later still standing strong
Victor Valiant, 23.06.2020
+Stands the test of time.
I've used this Millenium BS-500 Set since 2011.
For nearly 9 years now, they've kept my Yamaha HS80M up.
With an Auralex acoustic pad in between them.

+Reliable
The weight all rests on the thick metal pin,
which is pinned at the position/height you set the shaft to be.
After all these years still reliable & no sign of wear.

+Great cable relief from connector
There's a cable hook provided to attach to the shaft for cables.
I've positioned the hook to face the front rather than the backside so the XLR cable runs in an smooth curvature from front of shaft to back at the speaker.
This way the hook takes the weight of the cable, and not the connector that hangs from the speakers.
Both cable & speaker inputs remains as good as new.
Many overlook cable weight strain on the connector, and might damage either connector or speaker input after years hanging down.

+The Triangle base
Pockets are great for tierupping/spiral rolling remaining cable.
Keeping the power cables, audio cables separate etc
It stands sturdy, with metal carpet spikes provided to screw on for minimal ground contact.

+Base can be rotated as desired to fit with desks.
And speakers all setup can still rotate.
Nice black textured coating, never dusty & easy to clean.

Everything what's expected of a speaker stand to do it does.
Just make sure you don't place overly sized speakers on it.
Or let people walk around them to much.
It can take a nudge but not a bump. Cheers V
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Will do the job
kuca, 09.06.2021
They do the job. There is nothing wrong with them for that price. Use decoupling pad because they conduct vibrations to the floor. The stability could be better. Make sure to tighten the screws well. The quality is good, but the design could be better.

Pros:
- Height adjustment
- Build quality
- Price

Cons:
- Design
- No decoupling
- Lack of mass

These are good enough, but not the final destination. I plan to upgrade from these to something more stable.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Solid, Semi-Stable and Good for Homestudio
Ceyhun K., 01.10.2016
Positive: These stands are easy to mount/ adjust and are solid. They are stable for as long as the floor is perpendicular and not askew, and the height of the pole is not set too high.

The triangle shaped foot is very handy not only for stabilization but also for fitting the stand in corners! The adjustability is very flexible and suits for one's needs. One can adjust the height of the pole and the direction of the surface holder accordingly.

There is a soft material on the corners of the surface holders which prevents the speaker from sliding and shocks.

Negative: Consider taking the measurements of contact surface area of the stand and your speakers before buying. I have the Yamaha HS8 which does not perfectly fit on the surface of the stand, the speaker comes 1 to 2 cm out of the surface.

The stand is not that stable when the speaker is bigger or heavy. The surface holder is sometimes difficult to rotate.

Extra: There is a piece of metal that I do not know exactly the utility of. This piece fits in holes of the pole, I use it as a sort of security, if ever the pole doesn't hold and collapses. By putting the piece of metal in the hole, one can prevent/block the pole from sliding to the ground if ever it fails to hold.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Disappointed
Nel., 05.02.2020
They seemed sturdy, reason why I purchased them, but they are not.

VERY BAD:
- The central vertical "tube" is only held by a single screw to the middle of the base, and it is likely very weak and easy to bend/damage. It does not fit very firmly, even when screwed with a lot of force
- There is metal or paint power inside the base frame, so you have to shake the things like a mad to get out what you can. Not only that powder is likely toxic (extremely thin), but also you clearly do not want that in any studio environment (magnets from speakers, mics, guitar pickups...)
- Bad powder coating/damaged finish on the base

LESS BAD
- Feet pressed inserts at the base are moving (not properly pressed into the base)
- Plastic molded parts are low quality
- You cannot put the lower cable managers, as they simply do not fit
- Not the best welding on the base
- I wish it was possible to lower a bit more the speakers

Unless you are on a budget and do not care about a bit of frustration, go ahead. I recommend purchasing something else, especially if you plan to move them a lot. You cannot tour with that.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Millenium BS-500 Set
(5064)
Millenium BS-500 Set

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 45 kg, Length of triangular base: 45...

Gravity SP 3202 Studiomonitor Stand
(309)
Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors Massive cast-iron foot, Black powder-coating, Load capacity: 50 kg, Pipe diameter: 42/35 mm, Height adjustable from 900 - 1500 mm, Dimensions shelf: 250 x 250 mm, Weight:...

Stairville Adjustable Moving Head Tower
(10)
Stairville Adjustable Moving Head Tower

Height Adjustable Stand For moving heads, loudspeakers or similar, Height adjustable from 96 to 176 cm in 10 cm increments, Tube diameter: 43/35 mm, Dimension of support plate: 35 x 30 cm,...

K&M 26740
(121)
K&M 26740

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

Millenium BS-500 WH Set
(300)
Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm,...

Millenium BS-1100
(262)
Millenium BS-1100
to the product
£24.50

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces, Height: 740 - 1140 mm, Dimensions of the supporting...

K&M 26754
(31)
K&M 26754

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

Millenium Floor Monitor Stand DM1
(34)
Millenium Floor Monitor Stand DM1

Stand for Monitor Speaker Height adjustable from approx. 90 - 150 cm, Upper shelf (W x D): Approx. 256 x 330 mm, +/- 10 ° Inclinable, Clear dimension of the base plate (W x D): Approx. 48 x 43 cm,...

Zaor Stand Monitor Cherry/Black
(6)
Zaor Stand Monitor Cherry/Black

Zaor Stand Monitor color: Cherry with black, adjustable monitorstand, a layer of AERstop on top plate reduces vibrations from speaker, supports speakers up to a weight of 25 kilograms, top plate...

Genelec Z8000-409B Floor Stand
(31)
Genelec Z8000-409B Floor Stand

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

Gravity SP 3102
(3)
Gravity SP 3102

Studio Monitor Stand Powder coated steel construction, Continuously height adjustable (without fixed increments) from 263 to 358 mm, Inclination angle up to +/- 15°, Rotates 360°, With anti-tilt...

B-Stock from £31 available
£35
Excluding VAT; plus £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Online Guides
Monitor Speakers
Monitor Speakers
In this guide we’ll outline the basic principles of studio monitors, and take a closer look at their most common features.
 
 
 
 
 
 
 
 
 
 
test results:
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.
Recently Viewed
iZotope Community Appreciation Bundle

iZotope Community Appreciation Bundle (ESD); plug-in bundle; contains 11 essential tools for audio editing and creative music production; consists of Nectar Elements, Neutron Elements, Ozone Elements, RX Elements, BreakTweaker, Stutter Edit 2, Iris 2, Trash 2 as well as Exponential…

3
(3)
Recently Viewed
DSM & Humboldt Simplifier DLX Amp/Cab Sim

DSM & Humboldt Simplifier Deluxe Amp/Cab Simulator; Effects Pedal for Electric Guitar; Pre-Amp, Power-Amp and Cab-Simulator; all Analog 0 Watt Dual Channel Amp, with Cab Simulator, multistage Reverb, and versatile connectivity options; All, in an extremely small format; 2 Studio…

2
(2)
Recently Viewed
Quilter Superblock US

Quilter Superblock US, Solid State Pedalboard Amplifier for Electric Guitar; Three Classic US Amplifier voicings: 60 Tweed, 62 Blonde & 65 Black; comparable power to a 25-Watt Tube Amp when powered by the supplied PS-24 Power Supply or 1 Watt…

Recently Viewed
Casio CT-S1RD

Casio CT-S1RD Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

Recently Viewed
Polyend Tracker AE Legowelt

Polyend Tracker AE Legowelt; Limited Artist Edition; individual design; incl. orig. project files and sample packs;, Stand Alone Hardware Tracker; Step Sequencer & Song Arranger; Sampler (Forward, 1 Shot, Backward, Ping-Pong); Granular Synthesizer; Wavetable Synthesizer (compatible with Ableton Wave and…

Recently Viewed
RAV Vast D Major red

RAV Vast2 D Major red edition, D3/ G3, A3, B3, C#4, D4, E4, F#4, A4, Handpans-inspired steel tongue instrument, 2mm Steel, diameter 51cm, hight 17cm, weight 5,9kg, incl. bag

Recently Viewed
Behringer MIC300 Tube Ultragain

Behringer MIC300 Tube Ultragain; 1-channel tube preamp for Mic and Instrument; hand-selected 12AX7 tube; built-in limiter; 20dB pad; phase reverse switch; +48V phantom power; gain and output volume controls; LED meter; connections: XLR Mic-Input, Instrument-Input 6.3 mm jack balanced, XLR…

Recently Viewed
Mojotone T Standard Solderless Harness

Mojotone T Standard Solderless Harness; Z4T3W730; Solderless Pre-Wired Electronics Replacement Kit for T-Style Electric Guitar; pre-wired Harness with highest quality components that offers a vast improvement over stock electronics; Push-in solderless wire connection for quick installation and easy pickup swaps;…

1
(1)
Recently Viewed
Line6 HX Stomp XL

Line 6 HX Stomp XL; Multi Effects Pedal for Electric Guitar; Exceptional sound quality with 123 dB dynamic range, features the same SHARC DSP chip and HX models as the Helix, eight capacitive touch footswitches with colour-coded LED rings, 300+…

Recently Viewed
Casio CT-S1WE

Casio CT-S1WE Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

Recently Viewed
RAV Vast B/H Kurd red

RAV Vast2 B Kurd red edition, B2/ F#3, G3, A3, B3, C#4, D4, E4, F#4, A4, Handpans-inspired steel tongue instrument, 2mm Steel, diameter 51cm, hight 17cm, weight 5,9kg, incl. bag

Recently Viewed
Quilter Superblock UK

Quilter Superblock UK, Solid State Pedalboard Amplifier for Electric Guitar; Three Classic UK Amplifier voicings: JMP, AC Normal, and AC Top Boost; comparable power to a 25-Watt Tube Amp when powered by the supplied PS-24 Power Supply or 1 Watt…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.