K&M 23325 Table Microphone Stand

204 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • handling
  • stability
  • quality
Total
handling
stability
quality
Feels heavier & sturdier than the photo!
Dr D, 01.11.2019
I have a heavy RODE Procaster with shockmount plus TritonAudio Fethead and windshield attached, so I was concerned that a relatively short desktop stand with a not so big base circumference (180 cm or 6-inches) would suffice. Thankfully, I can report that this K&M mic stand is absolutely perfect. It is really quite heavy @ 2.5 Kg ( > 5 lbs) weight, thus can easily cope with more than a kilo of weight up top. In fact, when I grab the head of the mic whilst attached to this stand and try and pull it or tip it over, it just will not.
The other cool aspect of this particular mic stand, is the easily adjustable telescopic pole to adjust the height of the mic. Although it does not increase the overall height by that much, it is sufficient to get the mic up to head head whilst seated at a desk with this stand in front of you. It also secures very well and does not slip or move at all.
Finally, the circular rubber inlay on the rear side of the base, just feels quality - soft but does not allow the stand to slide at all. Even hitting the side of the base with my clenched fist does not move it.
I would highly recommend these K&M mic stands and the next time I shall be in the market for another one, I will look for this brand again.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Nothing not to like.
A Dutch Person, 11.01.2021
Reassuringly heavy, thank god. You can extend it 15 cm (unlike the K&M 232BK) which is great. It has a sturdy rubber ring at the bottom to dampen vibrations. It feels rock solid and I will probably also use it for live music (with omni and cardiods) in small interior locations (on table, shelf or chair) when there is no room for mike stands. They won't fall over.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Heavy, durable and shock absorbent.
Buddy v. Zutphen, 23.08.2020
The base of the stand was made out of solid metal and because of that it was way heavier then expected. For my use case it was great for bulkier microphones.

I myself used this for my RODE NT1 in combination with its SMR shock-mount. The rubber padding underneath he base made sure it didn't simply slide away and t also provided some extra shock absorption. I tried Tapping the desk it was standing on and it was not as noticeable in contrast to a standard 30 bucks boom arm that I was mounted beforehand. (This includes the SMR shock-mount in both configurations)

The one thing that did bug me however, was the extension mechanism, Which tended to twist itself loose multiple times when I tried to connect the shock-mount on it. When it was finally secured though.. It held it's position quite steadily so far. Other then that... it is a solid desk stand for the price!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
So stable it takes effort to move it
Ronfontu, 19.12.2020
This stand has a great build quality overall. The base is heavier than it appears to be but except for any transport purposes, I consider it as a plus because it provides better stability and because you should avoid touching the mic or its stand when speaking into it.
The height-changing mechanism takes 1-2 tries before getting the hang of it and could be slightly improved, but that isn't a dealbreaker at all. Plus, be careful when loosening the extended tube, you might in fact unscrew the tube from the base. Just get used to it and learn to know how it works.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
It will stain your desk!!!
Andu Nonultra, 18.05.2020
Inside with this table top stand you get a piece of paper with this notice:
"If you place the stand inside your house [?!?], it may be advisable to put a non-sliding pad under the stand's rubber end caps/rubber inserts as they could leave marks on sensitive floors, for example parquet flooring".
I was 'careful' and placed it on a green cutting mat. Needless to say it left it's mark on it.
This specification should be the first thing in the product description...
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Doubles as a battel hammer
Nänad , 04.01.2021
Seriously, this thing is so sturdy, you can kill a guy with it. Has a rubber layer on the bottom which prevents it from sliding on top of a desk. RODE NT 1 fits perfectly on top of it. Can be used for recording instruments, but for recording conversations as well...and killing people (in which case RODE NT1 should be replace with Shure SM58, due to it's enhanced rigidness)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Does exactly what it's supposed to do
HeldenFurlong, 06.07.2020
Fine, solid, and durable. The mic stand is perfect for when I'm teaching voice lessons. It holds the mic without problems and I've yet to hear any vibration come through when I've used it for quick recordings.
The only con is that you must make sure you have some material (cloth works best) to put between the base of the mic stand and the desk or table top as the anti-vibration material has a tendency to leave marks (especially on parquet flooring type surfaces). This warning is specified in the mic stand documents that come in the box.
Overall, it is very, very good.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Nice quality
mynvidia, 25.01.2021
I bought this for use with an SM57 mic.

This thing is heavy! It does not move at all when on my desktop table. The screw hole has uneven paint around its edges which looks like the item has been used before. I do not know if this is the case for all of these but that was the first thing that grabbed my attention. The locking mechanism for the stand is a bit mediocre. I do not like its implementation. If I try to open it, the whole arm would twist out with it from the base. You would need to grab the base to keep the whole thing twisting off. Could do with another way to tighten this,

When you have locked everything in place though it is rock solid. This thing will not tip over even if you bump it. All in all, pretty satisfied with it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Terrible when used with Genelec adapter plate 408
GenelecAddict, 14.11.2019
I bought it based on K&M recommendation. A mistake. It's impossible to secure the plate to the stand (no room for a nut at the top). If one turned the plate in the wrong direction it would be become loose and eventually fall off with the monitor. Caused me quite a damage.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Solid and well made
SJV0101, 16.04.2020
This is my second desktop stand for a mic. The first cheap one from amazon works except the base is so small that a heavier mic or the addition of a shock mount would make it unstable. No such problems with this stand. It's excellent, wide and heavy base and a very easy mechanism to extend the height. The height is also very good, way more than I need. Well worth it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Really Impressed
gazoneill, 05.04.2021
I was really impressed with the build quality when I opened this from the box. It's heavy, secure and one of the very few adjustable table stands on Thomann. I bought two and they are the perfect addition to my Shure SM7B mics. Highly recommended!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Fedor I., 22.07.2020
Heavy metal stand. Telesopic arm, the total heght (table surface to the screw) from 20cm to 33cm. It has a fixating gasket also.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Massive and compact
leohajder, 03.04.2020
Great stand, easy to assemble, does not move around. The base is really heavy and has a rubber grip.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Incredibly stable (and heavy)
St0rMl0rD, 20.11.2019
Bought this as a desk mic stand for my home studio, and was surprised to learn how heavy it actually is - once you put it on your desk, you won't want to move it. Incredibly stable, looks nice and professional build quality.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
high quality and no feedback noises
Peter FC., 05.04.2021
ideal fot meetings on your desktop
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Suits it's purpose well
LuckyStaff, 04.09.2020
This mic stand has a solid and sturdy base with a good amount of weight for my Aston Microphones Spirit. Just the right size threaded mount, 3/8". Makes it really easy to perform & record vocals without changing position with Logic Pro X or any recording software. I'm well pleased!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Very sturdy
ldndg, 19.09.2020
Great quality, holds heavy mics like a blue bottle without any wobbling
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Good for home usage
16.03.2016
Heavy and stable, good for table-top usage. Adjustable height, up to a maximum of about 30cm.

I use this with a Superlux S502 stereo microphone and it is very useful.

The rubber on the foot of the stand absorbs some of the vibrations, but not too much. You definitely don't want a child slamming the table while you are recording.

The system for extending the height is a plastic sleeve that screws on a fillet. It gets the job done.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Hefty, tough, good quality, good value.
HCJ , 14.09.2020
It basically does want you need for the most part.

Sits heavy on your table, doesn't make too much noise, and hold most microphones. It's also pretty hard to break.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Solid Stand
JXSM, 02.08.2019
Great stand, the base radius is a little large on a medium desk.

Very durable and stable,
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Quality, as usual !
06.05.2014
Once again with K&M, I am not disappointed with the quality of their stands. This one is just perfect to put a mic on a guitar/bass amplifier, a kick drum or a double bass. The adjustable height makes it really versatile. The base is not large so you can use it in tiny place, for example between the stands of a drum when you want to record the resonance skin of a snare drum.
The weight of the stand is quite heavy, which is maybe a bad point, but it allows you to use it with a boom (I did it many times and the stand never fell down, even with a heavy mic and a long boom).
In my opinion, if you work in a studio or in PA, you need at least one of these stands.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Brilliant
Stevemartin81, 18.02.2016
For a solid table top stand this is perfect. In fact I'm going to buy a few more for a radio panel show I'm recording next month. very solid and heavy to eliminate vibration
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Does exactly what it says in the tin!
Eli Thorne, 18.06.2020
Bought this a while back, and it's exactly what it claims to be. Very stable, nice rubber under the bottom to stop slipping and a little noise reduction. Can't go wrong!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Very stable solution for Genelec reference monitor...
Pietro G., 27.02.2015
I use the stand with the Genelec Z8020-408 accessory to adjust the height of the Genelec 8020 reference monitor. The result is a very solid and stable system, easy to fine adjust. The base is quite heavy and give stability to the system. No vibration. The 8020 weight is nearly 5 kg, but I have no problems. The paint is thick and durable. Easy to assemble in one min. The design of the plastic handle that rotate to adjust the height can be improved. Mechanically it is good.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
K&m quality
Richard7040, 14.06.2016
I have bought several different makes of the same product and I finally realised that it is worth paying more for the k&m version of this type of stand. Very sturdy and doesn't slip.
I definitely recommend it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report

K&M 23325 Table Microphone Stand

£21.70
Excluding VAT; plus £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
1
(1)
Recently Viewed
Line6 Relay G10TII Transmitter

Line6 Relay G10TII Transmiiter, 2,4 GHz plug and play Wireless transmitter for Relay G10 systems or Spider V series from Spider V 60, with internal receiver, audio frequency range 10 - 20.000 Hz, automic frequency setup, 118 dB SPL max.,…

2
(2)
Recently Viewed
Line6 Pod GO Wireless

Line6 Pod GO Wireless; Multi Effects Pedal for Electric Guitar; over 300 effects and models from Helix, M-Series and Legacy products, up to 6 simultaneous amp, cab, and effects models including a looper and a speaker cabinet simulation (Third-Party IR…

Recently Viewed
Harley Benton TableAmp V2 BlueTooth

Harley Benton TableAmp V2 BlueTooth, compact amplifier with great features for play-along and sing-along with streamed music using the integrated Bluetooth feature, ideal for acoustic guitar, ukulele, electric guitar, vocals and music, 30 watt RMS, 1x 5" bass woofer +…

1
(1)
Recently Viewed
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

1
(1)
Recently Viewed
Korg SQ-64

Polyphonic Step Sequencer with 4 Tracks 3 Melody tracks with 8-fold polyphony and 16 patterns of 64 steps each, Drum track with 16 monophonic sub-tracks, 64-Key matrix with illuminated buttons, OLED display, Editing modes per melody track: gate, pitch…

Recently Viewed
SSL 500-Series SiX Channel

Solid State Logic 500-Series SiX Channel; Channel Strip; with SuperAnalogue mic preamp and 5-way LED indicator; +48V phantom power; with phase and HPF switches; separate instrument/line input on front panel with Hi-Z switch (1MO); switchable 2-band EQ with bell and…

Recently Viewed
Arturia Pigments 3

Arturia Pigments 3 (ESD); virtual synthesizer; four sound engines with variable sound sources; Harmonic Engine with up to 512 partials; Wavetable Engine with a total of 164 wavetables; Utility Engine with sub-oscillator and two noise sample layers; Jup-8 V4 low-pass…

Recently Viewed
Lewitt LCT 140 Air Matched Pair

Lewitt LCT 140 Air Matched Pair - 2 matched small diaphragm condenser microphones, polar pattern: cardioid, frequency range: 20 Hz - 20 kHz, sensitivity: 14.6 mV/Pa, -36.7 dBV/P, max. SPL: 135 dB, low-cut: 80 Hz (12 dB/oct), pad switch: -12dB,…

Recently Viewed
Rode VideoMic Me-C

Rode VideoMic Me-C; condenser directional microphone; suitable for Android devices with USB-C connector; integrated USB type-C plug; 1/2" condenser capsule; polar pattern: cardioid; front pickup angle: 90°; sturdy aluminium housing with ceramic coating; built-in microphone preamplifier with DA converter (24Bit…

3
(3)
Recently Viewed
Alesis Nitro Expansion Pack

Expansion set for Alesis Nitro Mesh Kit Consist of 1x 10" One-Zone Pad and 1x 08" ON zones Tom Pad, Includes necessary rack clips, cymbal holder, L-rods and cables

Recently Viewed
IK Multimedia UNO Synth Pro Desktop

Analog synthesizer Paraphonic analog synthesizer with step sequencer, arpeggiator and effects section, Three wave morphing oscillators with PWM, sync, frequency and ring modulation, dual state variable filter with 24 modes, amplifier, Original OTA filter from the UNO Synth as…

Recently Viewed
Sennheiser MKE 400 MKII

Sennheiser MKE 400 MKII - condenser camera microphone, polar pattern: supercardioid, integrated windscreen, internal suspension, frequency response: 50 Hz - 20 kHz, switchable sensitivity: -23 / -42 / -63 dBV / Pa, max. SPL 132 dB SPL, 2 - 10V…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.