K&M 18810 Black

Keyboard Table "Omega"

  • Locking screws on both sides for incremental height adjustment
  • Support arms individually adjustable to the size of the keyboard
  • Flat pack size
  • Load capacity max. 80 kg, the optional second level (not included) up to 25 kg
  • Weight: 8.5 kg
  • Height: 600/1020 mm
  • Support distance adjustable by: 180 - 790 mm
  • Support depth: 345 mm
  • Assembly size: 1050 x 575 mm

Suitable accessories (not included):

  • Attachment K&M 18811: Article no. 437888
  • 3rd level K&M 18822: Article no. 463951
  • Shorter support arms K&M 18827: Article no. 484281

Further Information

Keyboard Supports 1

These are other customers' choices:

Customers who looked at this item have bought these:

K&M 18810 Black
52% bought this exact product
K&M 18810 Black
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
£75 Add to Basket
K&M 18820 Omega Pro Black
11% bought K&M 18820 Omega Pro Black £105
K&M 18950
7% bought K&M 18950 £85
Fun Generation Universal Stand
5% bought Fun Generation Universal Stand £27
K&M 18953
3% bought K&M 18953 £85
Our most popular Keyboard Stands
894 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • stability
  • handling
  • quality
Total
stability
quality
handling
Beautifully strong
12.07.2016
I have just suffered a double braced X stand failing under the weight of my Kawai MP7, damaging the Kawai and some other pieces of equipment. Fortunately the stand was bundled with the MP7 so I have some legal redress against the store (which is NOT Thomann).

I look after my equipment because I want things to look good and work properly. After this accident the first place I looked was K&M because I wanted a brand that I knew I could trust and that wouldn't cut corners on quality.

The stand arrived and was very easy to put together. Just a case of inserting the legs and cross pieces and screwing on the heavy duty hand tightened nuts. I also purchased the additional arms 18813 to place an additional level above. These, again, just hand tighten onto the main frame. The second level is adjustable for height and the angle of tilt. In addition I purchased the additional 18819 tray for my keyboard and mouse. This tray fits securely over the 18813 arms and is sufficiently strong to take the full weight from both your arms without flexing or moving. I set the 18813 arms wide enough that I can still fit and use the music stand on the Kawai but at this width I needed to reverse the bolts on the arms so that the knobs on the nuts were on the inside. Set up this way the tray fits properly. If you didn't need the arms so far spaced then no change would be necessary. The arms adjust high enough to accommodate the music stand but I will need to remove the tray to use music on it. This is ok for my usage of the Kawai as a separate piano or as a MIDI controller for my DAW.

The stand is very well made. It is sufficiently big enough for a heavy 88 key digital piano but it is an easy job to move the fittings for smaller boards. The sturdy legs adjust with a sprung knurl wheel. The leg holes are marked with numbers to facilitate getting both sides level. Some reviewers have commented that this stand is best for the studio because it doesn't fold. But I would say that as it only requires 4 hand tightened nuts to be removed to dismantle it into a flat packed unit and reassembly takes a couple of minutes it is eminently suitable for gigging musicians too. We all like convenience but a convenient stand has caused me heartache. I'd rather have peace of mind with a quality stand.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
handling
Perfect starter for a synth rack
keegston , 30.04.2020
This is the perfect stand if you're looking to stack up some synths over time.

I've got the Moog Sub37. The stand is very sturdy, as are the rubber ends on the stand arms. The synth never moves. It's much more space-efficient than an X stand - I can easily fit two small amps underneath.

It's the expansion capability that I also love with K&M. If I buy more gear in future, I can attach two more levels to this stand, allowing me to easily to stack up keyboards, synths, modular pieces and FX pedals.

Pros:
- Strong and sturdy, doesn't move an inch
- Easy to assemble, raise and adjust
- Future proof - expandable to three more levels
- Looks pretty good too, you can get it in black, white and nordy red.
- Space efficient - I fit two amps underneath and a mic stand behind it.

Cons:
- I can't think of any. I've had X stands in the past, and this blows them out of the water in terms of sturdiness, space efficiency and expandability.

If you're looking for a keyboard or synth stand 1-4 pieces of gear, get this. K&M built the best stuff in this space.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
handling
Exceptional quality
Stormchild, 15.07.2019
This stand is unbelievably stable. I'm using it with two keyboards with the second tier option (18811) and it doesn't move at all when playing either of them. It's a night and day difference compared to the various x-stands I've used over the years. The vertical legs leave a huge amount of space for your pedals and feet, and it also includes velcro ties that keep all the cables out of the way. And of course the entire thing is extremely well built (like every other K&M product I've owned).

Both tiers include big, chunky rubber pads you can install in exactly the right place for each synth. My keyboards feel like they're glued onto this thing. I have my primary MIDI keyboard (NI Komplete Kontrol S49 mk1) on the first tier, and I've never really liked using aftertouch until now, because it involves pressing down quite hard on a key, which has always felt wobbly and unpleasant on x-stands. The keyboard flexes slightly, but the stand doesn't move at all.

I wish I could lower the second tier a little bit more. I have it at the minimum height and maximum angle (20º) and I wouldn't mind if it was a few cm lower. I'm also planning to add the third tier at some point (18822), which will be even higher up. If you don't mind the second tier being at less of an angle, you can lower it a bit more (about 12 mm), but the change in angle raises the front of the keyboard, and I have a synth with tons of controls on the second tier (Roland System 8), so the max angle works better for me.

Other than that, I couldn't be happier with this stand. The exceptional build quality and stability have made it much more enjoyable to use my keyboards.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
handling
Sturdy and configurable keyboard stand
Synthy guy, 21.09.2020
This stand is really well made (as K&M always is) and has lots of (expensive, as K&M always is) options to add on. Doesn't fold so it's far better for a studio installation. If it fits your needs you'd be hard pressed to find something better made - I have the two additional tiers and I trust this stand completely to support the over 10,000€ of gear I have sitting on it including a couple of essentially irreplaceable synths.

Pros: Sturdy, flexible, professional
Cons: Doesn't fold
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
B-Stock from £68 available
£75
Excluding VAT; plus £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-33
FAX: +49-9546-9223-24
Youtube
Omega Stand Keyboard 18810
Omega Stand Key­board 18810
Con­nol­lyMu­sic­Com­pany
 
 
 
 
 
Online Guides
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
 
 
 
 
 
 
 
 
 
 
test results:
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.
2
(2)
Recently Viewed
iZotope Community Appreciation Bundle

iZotope Community Appreciation Bundle (ESD); plug-in bundle; contains 11 essential tools for audio editing and creative music production; consists of Nectar Elements, Neutron Elements, Ozone Elements, RX Elements, BreakTweaker, Stutter Edit 2, Iris 2, Trash 2 as well as Exponential…

5
(5)
Recently Viewed
DSM & Humboldt Simplifier DLX Amp/Cab Sim

DSM & Humboldt Simplifier Deluxe Amp/Cab Simulator; Effects Pedal for Electric Guitar; Pre-Amp, Power-Amp and Cab-Simulator; all Analog 0 Watt Dual Channel Amp, with Cab Simulator, multistage Reverb, and versatile connectivity options; All, in an extremely small format; 2 Studio…

Recently Viewed
Fender SQ Affinity P Bass MN PJ OW

Fender Squier Affinity Precision Bass PJ Olympic White; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: C; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm (1,63");…

Recently Viewed
Harley Benton EX-84 LH Modern BK

Harley Benton EX-84Modern BK, offset body-style lefthanded electric guitar; tribute series; body: mahogani (sapele entandrophrama cylindricum); neck: mahogani (sapele entandrophragma cylindricum); fingerboard: ebony (diospyros celebica); neck mount: set; neck shape: slim taper c; inlays: white dots; 22 extra jumbo frets;…

Recently Viewed
XAOC Devices Moskwa II

XAOC Devices Moskawa II; Eurorack module; 8 Step Rotosequencer; 8 steps, each with CV control knob and on/off button; for each step programmable functions like slew (portamento), slew probability, gate/trigger probability; up to 8 gate/trigger pattern programmable for each step;…

Recently Viewed
Casio CT-S1WE

Casio CT-S1WE Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

1
(1)
Recently Viewed
the t.bone Sync 2

Digital 2.4 GHz radio system with two transmitters and one receiver. The compact size is perfect for mobile applications such as interviews, micro-video recording and Vlogging, Transmitter can be used with integrated microphone or external microphone, Distortion-free signal…

Recently Viewed
Blue Microphones Snowball iCE USB Black

Blue Microphones Snowball iCE USB Black; Plug 'n Play USB microphone for recording and podcasting; USB condenser microphone; polar pattern: cardioid; perfect for vocal and music recordings as well as podcasts; frequency response: 40 Hz - 18 kHz; sample rate:…

Recently Viewed
Fender SQ Affinity Tele Lake Pl. Blue

Fender Squier Affinity Telecaster Lake Placid Blue; Telecaster Electric Guitar; Affinity Series; Body: Poplar; Neck: Maple; Fingerboard: Laurel; Neck Mount: Bolt-On; Neck Shape: C; Inlays: Pearloid Dots; 21 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 42 mm (1,65"); Scale:…

Recently Viewed
XAOC Devices Ostankino II

XAOC Devices Ostankino II; Eurorack Modul; expander for Moskwa II sequencer (item 521036); expands Moskwa II with CV inputs for Random Play, Slew, Probability, Transpose, Range, Clock Rate, First Step, Last Step; oputput for the internal clock signal; individual gate…

Recently Viewed
Casio CT-S1RD

Casio CT-S1RD Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

Recently Viewed
the t.bone Sync 1

2.4 GHz Digital radio system with one transmitter and one receiver The compact size is perfect for mobile applications such as interviews, micro-video recording and Vlogging, Transmitter can be used with integrated microphone or external microphone, Distortion-free signal…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.