Jaspers 4R-120B

Keyboard Stand with Lockable Wheels

  • For 4 keyboards
  • Material: Black anodised aluminium
  • Height: 140 cm
  • Width: 130 cm
  • Inner width: 120 cm
  • Depth: 50 cm
  • With hand wheels
  • With memory clamps for the upper supports
  • The lower support, reinforced with a second tube, has a pair of 60 cm support arms and is also suitable for particularly heavy keyboards
  • Other holders are 40 cm long
  • All supports are adjustable in height and inclination
  • Maximum load: Lower support up to 40 kg, upper supports up to 15 kg
  • Colour: Black
  • Made in Germany
  • Further compatible optional accessories (not included): Further support arm pairs, support reinforcements, monitor holder, microphone boom, sheet music stand, laptop holder

Further information

Keyboard Supports 4
5 customer ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.2 / 5.0
  • handling
  • stability
  • quality
4 written ratings Read all reviews
Total
stability
quality
handling

Bought and Regret Greatly

Arsxxi, 09.05.2017
I had the idea of buying the tier Jaspers stands in order to replace my RTX and Quiklok stands in X and then win the place below to put my rack devices below in a limited place. I chose the models 4R-120B & 3R-140B and once received in Paris (Thomann delivery service as always, the Top) sent them back to my secondary studio, small but in full nature, very inspiring for the creation.
Arrived on the spot it is a cold shower that awaits me, and here are the points to consider:
Unpacking. The tiny notice that does not correspond to the model chosen, no spare part, nor a single screw in case of breakdown. Missed 2 nuts (convenient to find them in the countryside). Poor presentiment.
The height of the lower part is limited for the lowest keyboard, and does not allow you put yourself normally before the piano, very poor calculations of the engineer (he never played the Piano evident). Without calculating the human knee height, you are then offered, stay on the knee-like rapper typing the keyboard with a finger. Impressive. No way to mount keyboard, because there is no room for other keyboards and it is not modular (nothing modular, see below).
Tube quality is mediocre. Aluminum too thin (nothing common like Roland drums stands for example) which I cut, in order to adjust their width, with a simple kitchen knife. Tube surface is too slippery and does not clamp well to clamps. My keyboards have different width (and depth) then, to refine the stand by trying to make it semi-modular, I cut the long tubes in half at the center by putting inside what I found in the country pantry, -the tube of my old vacuum cleaner, much better in metal quality by the way. So I could adjust stand width.
At Jaspers, there are no fixers to ensure the stability of their construction. I had to drill the holes in the tubes and put the folding nails in order to troubleshoot the constructive genius signed by Jaspers.
The allowable weight for the superposed keyboards is announced at 15kg max. Well, but it is my Minimoog Model D that remains at the limit under the risk of falling on my head. Who calculated these inappropriate weights? For the generalized weights for serious synths are, for example - Yamaha SY77, Oberheim OB12, Korg Z1 - each of 17 kg at least! These engineers from Jasper never approached musicians and their instruments before developing their product? No, it's not that the tablets only and nano synths that musicians use to announce the cruel reality! Why not to ask Musicians before building for them?
Without horizontal fixers on the tubes, the keyboards inevitably slip under their weight and arrive in perfectly twisted position on each level which does not add admiration neither to the concert public nor especially to the lucky owner of Jaspers stand.
It's really unstable too because of the construction itself: the superposed keyboards are placed on the tube facing A in causing a diving effect, when your whole stand, being overloaded begins to tilt towards you DANGEROUSLY. Normally low tubes should be heavier (hee, not the case, and why do) to stabilize this sordid creation. I put sand in low tubes to troubleshoot stability as one can, discovering at the same time that the casters are of cheap plastic type furniture of 3 cents without resin nor the screws. What stability can be talked about? Everything moves. I finally hooked the back of the stand with the cord to the ripe to not have the worst surprises, but how to do on the stage for example? To What musician will tie his stand? An idea? This is the direct question to Jaspers Engineering C °.
The arms of 40 and 60cm - are not modular either. Only one hole in the middle, not even three. I looked for the drill to confine those arms. Hello DIY. It is highly frustrating. The price required for a pair of these arms is nice 34 euros though ... The depths of synths being different, how do you adjust their position to see anyway the panels of your instruments? I'm exaggerating? Since the panels are virtually hidden from seen in Jaspers version?
No, it is a pure and also un-natural catastrophe.
In summary: the production of this brand is an Absolute FIASCO in engineering and in quality. The prices are way too high without being even justified. For me it is my money and my nerves that are lost but also the cheating and non-respect of the clients.
If I could ask for the refund! Or ?ll do these stands end their lives in the garbage? Or will it help me to put some pots and pans on top of it? (Too risky though). Looked, I gave Full constructive ideas to Jaspers house, can be in thanks and EN counterpart it refunds me my ¤ 597.70 anyway? I offer free ideas for improvement of their stands, is it valuable?
We'll see there.
In any case in current version I strongly discourages to buy the Jaspers stands, at least that their construction would not be reviewed from A to Z, the quality would be compliant ("made in Germany" - by whom?) And the price Adjusted to reality.
I ask Thomann to advance this note to Jaspers and demand that their production conform to the requirements of professional musicians. Or urgently mark: "amateur stand for light keyboards and boards". Thank you.
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
handling

Great stand

05.09.2016
Flexible, light and stable!
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
€333 £291.74
Free shipping incl. VAT

£ price – guideline price only

Available shortly (2-5 days)
Available shortly (2-5 days)

This item has been ordered with our suppliers and should be in our warehouse in the next few days.

Standard Delivery Times
Share this product
Your Contacts
Phone: +49-9546-9223-33
FAX: +49-9546-9223-24
Online Guide
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
Online guides
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
 
 
 
 
 
test results:
Offers include 20% British VAT and are valid as long as stocks last. Shipping costs to the U.K. are 10 EUR (approx. £7), free shipping on orders above 149 EUR. Please click here for international Shipping Costs and Delivery Times. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Yamaha P-125 BK Boss GT-1000 Line6 Power Cab Plus Dante AVIO AES3 IO Adapter 2x2 Dante AVIO USB IO Adapter 2x2 ADJ PRO-ETBS ProEventTable Bag II Reloop RP 4000 MK2 Yamaha L-125 BK Gator iMac 21" Tote Bag Flyht Pro Rack Drawer 19" 3U 28 cm lock Orange OMEC Teleport Marshall Origin 50H Head
(1)
Recommended
Yamaha P-125 BK

Stage Piano Graded Hammer Standard Keyboard (GHS) with 88 weighted keys, Pure CF Sound Engine, 24 Tones, Max. Polyphony: 192 votes, Dual, split and duo function, Two-track recording (one song), 20 Rhythms (drums + bass), Intelligent Acoustic Control, 21...

to the product
€549
(2)
Recommended
Boss GT-1000

Multi effect pedal 32-bit AD / DA, 32-bit floating-point processor and 96 kHz sampling rate, New BOSS DSP engine, specially developed for audio applications, AIRD (Augmented Impulse Response Dynamics) brings BOSS's Tube Logic concept to a digital guitar processor,...

to the product
€955
(1)
Recommended
Line6 Power Cab Plus

Active Modelling Guitar Box With integrated USB audio interface, With 6 loudspeaker simulations (expandable), Equipped with: 1x 12"speaker and 1" compression driver, Power: 250W @ 8Ω, Frequency range: 70 - 20000 Hz, Maximum level: 128 dB @ 1 m,...

to the product
€746
Recommended
Dante AVIO AES3 IO Adapter 2x2

Y Adapter Transmits two channels each from AES3 to a Dante network and vice versa, RJ45 Metal plug with built-in LEDs, 1 XLR male output, 1 XLR female input, 96 kHz / 24 bit, Robust housing for day-to-day tasks...

to the product
€163
Recommended
Dante AVIO USB IO Adapter 2x2

Dante AVIO USB IO Adapter 2x2; for connecting a computer to a Dante network; perfect for recording or play back a stereo signal; robust housing; fully functional Dante interface; transmits two inputs and two outputs; class compliant

to the product
€124
Recommended
ADJ PRO-ETBS ProEventTable Bag II

ADJ PRO-ETBS Pro Event Table Bag II, Carrying bag suitable for Pro Event Table II, optimally protects against dust and scratches, carrying straps for easy transport, not suitable for the first version of the Pro Event Table, made for #427915

to the product
€44
Recommended
Reloop RP 4000 MK2

Quartz-driven DJ turntable with high-torque direct drive Speeds (RPM): 33 1/3 - 45 - 78, Pitch with selectable range of +/- 8% and+/- 16%, Reverse function, Connections: 1 PHONO output (gold plated) and 1 GND ground connection, Incl. platter,...

to the product
€285
Recommended
Yamaha L-125 BK

Yamaha L-125 BK; stand for Yamaha P-125 BK; colour: Black

to the product
€128
Recommended
Gator iMac 21" Tote Bag

Nylon Bag Fits 21" Apple iMac Water resistant, Good grip and protection with adjustable foam blocks and hard-panel reinforcement in the front flap, Foldable sun and dust protection, Double zipper, Strap and handle cutouts, Reinforced, detachable carrying handles, PVC...

to the product
€118
Recommended
Flyht Pro Rack Drawer 19" 3U 28 cm lock

Flyht Pro Rack drawer 19" 3U 28 cm with lock. Robust and easy glide lockable metal rack drawer. Colour: black, Dimensons: WxHxD 483 x 134 x 280 mm, weight: 6,3 kg

to the product
€43
(1)
Recommended
Orange OMEC Teleport

Orange OMEC Teleport, effects pedal, interface without any specific drivers or software requirements, AD / DA converters, USB B connector, Amplitude CS is included, LED: USB Bypass, footswitches: USB Bypass, connections: mono input (1/4" jack) - stereo output (2x 1/4"...

to the product
€119
(1)
Recommended
Marshall Origin 50H Head

Tube Amp Head for Electric Guitar Gain boost function, Two voicings (Normal, High Treble), which can be mixed continuously via the tilt control, Switchable power reduction for full sound in any environment, 1 Channel, Power: 50 watts, Preamp tubes:...

to the product
€649
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.

Please leave a comment. Please enter your e-mail address.