Headphone Amps

Rupert Neve Designs RNHP

Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece
Three switchable inputs (XLR, RCA, mini-jack)
Solid steel housing

Available at short notice (usually 2-5 days)

Fender Mustang Micro Headphone Amp

12 Amp models from the Mustang GTX series
12 Effects
EQ

Behringer HA400

Separate volume control for each channel
1 Input with 6.3 mm stereo jack
Input impedance 100 kOhm

Behringer HA6000

Professional headphone amplifier system for stage and studio applications
6 Independent stereo high power amplifiers in 1U
6 Direct aux inputs

ART Headamp 6 Pro

Bass and treble separately adjustable
8-Segment LED chains for each channel and bus
XLR and jack inputs are 6.3 mm balanced

In stock within 1–2 weeks

Lake People G103-P MKII

5-Fold internally switchable gain (-6 / 0 / +6 / +12 / +18 dB) for low to high impedance headphones (16 to 600 Ohm)
NF frequency range: 150 kHz (-3 dB)
Alps potentiometer with good synchronisation

In stock within 1–2 weeks

Behringer MA400

For studio and stage applications
Flexible mic in and XLR mic thru connectors
With ground lift switch

Harley Benton Rockplug Classic Rock

Analog overdrive circuit
Overdrive, tone & volume controls
Built-in rechargeable lithium battery with about 15 hours of use

4x Independent stereo inputs with unsymmetrical jack sockets
Separate volume control for every channel
Easily expandable - Up to 4 devices can be operated together

Behringer HA8000 V2

For stage and studio applications
8 Independent stereo amplifiers in 1U
2 Stereo main inputs for two independent mixes from all 8 output channels

Lake People G108 Headphone Amp

Balanced headphone amplifier (4 output stages)
Supports headphones with impedances from 8 to 600 Ohm
Internal 7-way switchable gain

In stock within about one week

Six independent headphone amplifiers with high output power
Possibility of simultaneous use of up to 18 headphones
Three headphone outputs on every channel: one on the front side, two on the back side

Harley Benton DNAfx GiT Mobile

14 amp modeling models from DNAfx GiT Pro
14 digital effects
Tone / EQ settings

Violectric HPA V222

Balanced headphone amplifier with 4 output stages
50 Volts internal operating voltage - ideal for high-impedance headphones
High output power, for headphones with low impedances and magnetostats

In stock within about one week

2 Stereo inputs can be assigned to each of the headphone channels
Input 1: XLR/Jack balanced; Input 2: XLR balanced / RCA connector unbalanced
Input level control, signal- and overload indicator on both inputs

Combination of 24 x 16 x 8 monitor mixer, 6 channel headphone amplifier and USB/AVB audio interface
24 Inputs
8 Stereo bus outputs

SPL Phonitor xe black + DAC768

Suitable for headphones with a jack plug and balanced headphones with a 4-pin XLR plug
Offers the option of integrating up to 6 stereo sources: XLR, RCA, USB, Coax, Optical and AES / EBU
AKM converter chip for high sound details

With monitor control
4 Separately adjustable stereo headphone outputs: 6.3 mm Stereo headphone
Maximum output power: 130 mW per channel

SPL 2Control black

All-analogue design
Connection and selection of two stereo sources
Two stereo speaker sets and two headphones can be connected and controlled independently

6x Independent ultra low-noise headphone amplifier
150 mW per channel
With output control

Swissonic Headamp 8

Displays for input and output levels
Inputs: 2x Main In - 6.3 mm jack and Direct In per channel - 6.3 mm jack stereo
Outputs: 2x Main Out - 6.3 mm jack

Ideal for wired in-ear monitoring
Also suitable for mobile recording
2 Mounting options: Belt clip or 5/8" thread for tripod mounting

Available at short notice (usually 2-5 days)

LD Systems HPA 1

2 XLR Inputs
Stereo/ mono/ mixed mode
Frequency range: 20 - 40,000 Hz

With 3 headphone outputs
Suitable with in-ear earpieces of up to 20 Ohm
XLR left/right input

Lake People G103-S MKII

A 5-fold internally switchable gain (-6 / 0 / +6 / +12 / +18 dB) for low to high impedance headphones (16 to 600 Ohm)
NF frequency range: 150 kHz (-3 dB)
Alps potentiometer with good synchronisation

Free Shipping Over £149
The prices shown include VAT.