Customer center login

Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors

  • Massive cast-iron foot
  • Black powder-coating
  • Load capacity: 50 kg
  • Pipe diameter: 42/35 mm
  • Height adjustable from 900 - 1500 mm
  • Dimensions shelf: 250 x 250 mm
  • Weight: 6.5 kg

These are other customers' choices:

Customers who looked at this item have bought these:

Gravity SP 3202 Studiomonitor Stand
46% bought this exact product
Gravity SP 3202 Studiomonitor Stand
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
£50 Add to Basket
Millenium BS-500 Set
15% bought Millenium BS-500 Set £41
Gravity SP 3202 VT Studiomonitor Stand
8% bought Gravity SP 3202 VT Studiomonitor Stand £44
Millenium BS-1100
5% bought Millenium BS-1100 £33
Millenium Desktop Monitor Stand DM2
3% bought Millenium Desktop Monitor Stand DM2 £18.30
Our most popular Studio Stands
324 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • stability
  • quality
Total
quality
stability
as a first monitor stand, I can wholeheartedly recommend this
Peter V_, 18.07.2019
Solid boxing, it has some good weight which is of course never a bad thing when it comes to any type of stands. Instruction manual is close to nonexistent, but it does not have too many parts and it's easy to figure out what goes where, so it's not a big issue.

One thing that sort of stood out for me is I could tighten the stem/body to the bottom piece without actually screwing it fully on, which gave me some freedom of rotating the upper piece but at the same time it wasn't straight and I'd assume if left like that it might tend to bend. I had to fully tighten it and move the whole piece around if I had to. Again, not a biggie unless you're cemented to your chair or constantly moving around. I'm using a pair of these for holding up studio monitors for mixing so I'm fine with this.

It wiggles a little bit when pushed (with weight on top of it) but other than that it doesn't budge at all. I'm not using the bottom spike screws only the rubber feet, I'd guess those could give me some additional stability but I'd rather not scratch the floor up with those. As the manual is 4 drawings in total I wasn't sure what to make of those.

In the end, this is my first ever monitor stands and I'm wasn't at all disappointed, I think I got good value for my money. Can totally recommend!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
okay if I dont count the accuracy to quality
sadthoguah, 20.05.2019
the stand is a disaster which shows me once and for all not to buy cheap stuff anymore!

after hooking it up (all the way correct to mention that) the device stood terribly unstraight. so I had to use the spikes first to fix one of the issues and that was to get the stand itself straight and.. after 5 or 6 corrections using the spikes in different positions the stand was straight. the second pro came with the top plate which for shame was also unstraight so.. I cut some paper and pressed it under one of the plates bottoms where the tending was to be unstraight downwards. after doing "all that" I got a well working stand for my mini dekker home studio hybrid homedisco/studio light effect. distastrous man, no cheap gear anymore.

the stand in its core is stable and the quality itself is good but I dont need a stand which isnt accurate after hooking up and putting down on the ground.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Nothing more you can ask for
Bogdan.Bacrau, 03.01.2020
The stand is incredibly sturdy and stable and has some nice to have configuration and safety features:
-The base is heavy metal (\m/) so even if you jiggle the stand by mistake the monitor will most probably stay where it is.
-The platform on which the monitor stands has a border on the front, which fixes the monitor.
-The rod has holes on several heights and a bolt for taking all the weight; this removes the pressure on the locking screw.
-The locking screws are easy to use (you don't need screwdrivers) and very ergonomical (you cannot hurt yourself while doing the adjustments).
-The stand looks very nice, it matches any environment.

I have two such pairs, one for the monitors in the studio and one for the monitors from my personal computer, and I'm very glad I have them. I totally recommend them.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
great job
ViFi69, 07.08.2021
thank you for the great product and delivery
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Gravity SP 3202 Studiomonitor Stand
(324)
Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors Massive cast-iron foot, Black powder-coating, Load capacity: 50 kg, Pipe diameter: 42/35 mm, Height adjustable from 900 - 1500 mm, Dimensions shelf: 250 x 250 mm, Weight:...

Millenium BS-500 Set
(5157)
Millenium BS-500 Set

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 20 kg, Length of triangular base: 45...

Stairville Adjustable Moving Head Tower
(11)
Stairville Adjustable Moving Head Tower

Height Adjustable Stand For moving heads, loudspeakers or similar, Height adjustable from 96 to 176 cm in 10 cm increments, Tube diameter: 43/35 mm, Dimension of support plate: 35 x 30 cm,...

K&M 26740
(128)
K&M 26740

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

Millenium BS-500 WH Set
(318)
Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 20 kg, Length of each side of base 45cm,...

K&M 26754
(31)
K&M 26754

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

Millenium Floor Monitor Stand DM1
(39)
Millenium Floor Monitor Stand DM1

Stand for Monitor Speaker Height adjustable from approx. 90 - 150 cm, Upper shelf (W x D): Approx. 256 x 330 mm, +/- 10 ° Inclinable, Clear dimension of the base plate (W x D): Approx. 48 x 43 cm,...

Gravity SP 3202 VT Studiomonitor Stand
(87)
Gravity SP 3202 VT Studiomonitor Stand

Vari-Tilt Studio Monitor Stand Solid cast iron foot, Black powder coating, Load capacity: 50 kg, Pipe diameter: 42 / 35 mm, Height adjustable from 900 - 1500 mm, Maximum angle of inclination of...

Gravity SP 3102
(8)
Gravity SP 3102

Studio Monitor Stand Powder coated steel construction, Continuously height adjustable (without fixed increments) from 263 to 358 mm, Inclination angle up to +/- 15°, Rotates 360°, With anti-tilt...

Millenium BS-1100
(274)
Millenium BS-1100

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces, Height: 740 - 1140 mm, Dimensions of the supporting...

Genelec Z8000-409B Floor Stand
(32)
Genelec Z8000-409B Floor Stand

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

£50
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Online Guides
Monitor Speakers
Monitor Speakers
In this guide we’ll outline the basic principles of studio monitors, and take a closer look at their most common features.
 
 
 
 
 
test results:
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.