Customer center login

Doepfer A-180-2 Multiples

Passive Multi-Port Distributor

  • 8x Interconnected jacks
  • Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board)
  • Width: 2HP

Further Information

Width 2 TE / HP

These are other customers' choices:

Customers who looked at this item have bought these:

Doepfer A-180-2 Multiples
51% bought this exact product
Doepfer A-180-2 Multiples
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
£30 Add to Basket
Doepfer A-180-3 Dual Buffered Multiple
11% bought Doepfer A-180-3 Dual Buffered Multiple £42
Doepfer A-180-2 Vintage Edition
8% bought Doepfer A-180-2 Vintage Edition £33
Mutable Instruments Links
7% bought Mutable Instruments Links £59
Behringer 173 Quad Gate/Multiples
6% bought Behringer 173 Quad Gate/Multiples £64
Our most popular Multiple, Divider Modules
103 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • handling
  • features
  • quality
Total
This mult unit is very cheap but you might need more
20.01.2016
One thing to note firstly is that despite a lot of what you might read in product information on this and other sites the design of this module has changed slightly. When it is shipped from the factory the middle solder bridge between the two groups of four sockets is not joined, so it is now shipped as standard functioning as two groups of four interconnected jack sockets. If you require an eight-way mult you simply have to join the two groups together at the back of the panel. Just a line of solder will do the job. There's not much to say about this unit, other than the build quality is great - as you would expect from Doepfer - and the unit is competitively priced. I don't see any reason to pay more for equivalent modules from other manufacturers, in which case you would simply be paying for the name. One thing I will point out: if you plan to use this module to multiply CV input to drive oscillators then spend a bit more and get the buffered mult unit A-180-3. This will ensure that voltage is consistent on all outputs, meaning that your oscillators will be easier to get in tune with each other and will track correctly.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality
Better than the spiders
1 BPM, 22.05.2021
Before I took this mult, I was using spiders, but half of the spiders started to fail, which is kinda weird. Anyway, I decided to use rack mult and do not regret. Takes very littel rack space and the connectors feel snug and reliable.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality
Not Much to review
Pete81, 26.07.2020
Didnt realize how useful Multiples were......
Small foot print and does exactly what you'd expect. I'll definitely be adding more in the future.
I feel mean taking one star off for features (but it doesnt have any), not sure why you'd buy this and expect more.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
A multiple from Doepfer in just 2HP
Jonathan64, 11.09.2013
No modular system is complete without several multiples and I have waited quite a while for Doepfer to bring out a narrow version of theirs. Here it is at last, and it does the job beautifully in just 2HP. Just does the job it is meant to in the least possible space. Well done Doepfer!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-180-2 Multiples
(103)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

Doepfer A-160-2 Clock Divider II
(31)
Doepfer A-160-2 Clock Divider II

Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

Doepfer A-124 Wasp Filter SE
(86)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

Doepfer A-178 Theremin
(26)
Doepfer A-178 Theremin

Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20...

Doepfer A-151
(38)
Doepfer A-151

Quad Sequential Switch Module Electronic 4-position rotary switch, Trigger input, Reset input, 4 Inputs, 4 Outputs, Voltages of -8V to + 8V can be processed, Euro rack format, Width 4 HP, Depth: 35...

Doepfer A-199 Spring Reverb Module
(64)
Doepfer A-199 Spring Reverb Module

Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb...

Doepfer A-138M
(20)
Doepfer A-138M

Matrix Mixer With 4 rows and 4 columns, Unipolar / Bipolar mode switchable on each column, Suitable for both control voltage and audio, Width: 20 HP, Depth: 20 mm, Power requirements: +30 mA (+12...

Doepfer A-156
(45)
Doepfer A-156

Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous input control voltage in the range of 0 ... 10V into a stepped output voltage in the same...

Doepfer A-198 (Module + Manual)
(13)
Doepfer A-198 (Module + Manual)

Trautonium Controller Consists of Doepfer A-198 Module and Ribbon Controller, Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor,...

Doepfer A-156 Vintage Edition
(18)
Doepfer A-156 Vintage Edition

Dual Control Voltage Quantizer Vintage edition with black front plate, Converts a continuous input voltage into a stepped output voltage, Eurorack format, Width: 8 HP, Depth: 55 mm, Power...

Doepfer A-180-3 Dual Buffered Multiple
(42)
Doepfer A-180-3 Dual Buffered Multiple

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

£30
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.