Customer center login

Doepfer A-160-2 Clock Divider II

Frequency Divider

  • For clock/trigger/gate signals
  • Width: 4 TE/ 4 HP / 20 mm

Further Information

Width 4 TE / HP

These are other customers' choices:

Customers who looked at this item have bought these:

Doepfer A-160-2 Clock Divider II
55% bought this exact product
Doepfer A-160-2 Clock Divider II
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
£85 Add to Basket
Doepfer A-151
12% bought Doepfer A-151 £50
Doepfer A-160 Clock Divider
11% bought Doepfer A-160 Clock Divider £55
Doepfer A-160-5 VC Clock Multiplier
7% bought Doepfer A-160-5 VC Clock Multiplier £85
Doepfer A-160-5 Vintage Edition
3% bought Doepfer A-160-5 Vintage Edition £90
Our most popular Clock-, Trigger-Modules
31 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • handling
  • features
  • quality
Total
Wonderfully useful
01.02.2017
I've been building up my modular system & studio for about a year, and many of the parts (Moog Mother-32, Arturia Minibrute & Microbrute) feature sequencers that can be clocked to each other, which is great.

However this module allows me to use them at different rates while remaining synchronised which has opened up a whole world of experimentation.

The outputs can be used to sync other units, to set the tempo of tapped LFOs on modules such as Mutable Instruments Peaks and the Disting Mk 3.

I like the usual Doepfer high build quality and the fact that you can switch between the three modes; a straight clock divider with 7 divided outputs (half speed, quarter speed and so on), as a set of prime numbers to create poly rhythmic beats and a set of sequenced outputs.

Each output has it's own LED so you can see at a glance what is happening - it's a very slim unit so might not be suited to the edge of a case as this could hinder access to the sockets.

Like all the other Doepfer modules I have purchased from Thomann it comes well packaged and came with two screws and a connecting lead for the bus board.

Highly recommended if linking sequencers is your thing!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality
Function over form
Emily Banks, 29.05.2020
This is one of the only clock dividers that can turn gate signals into triggers. I use it to trigger accents at set intervals that are divided from my main clock without having to use up triggers from more exotic modules like Euclidian Circles.

Functionality wise this module is a real lifesaver. Very versatile.

That being said, the jacks are easily the worst I've ever used on any product. They are crooked and skewed so that inserting a cable at a normal angle feels like you're going to break the entire module. You have to insert patch cables from a sideways angle to get them in there, and even then they wobble like hell.

I've had good experiences with Doepfer before so I'm hoping I was just unlucky to receive a poorly assembled module. You might have more luck.

Despite the jacks being loose and crooked, the module has never malfunctioned because of it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Clock Heaven
Stephen662, 23.07.2015
I got this new Deeper clock divider to add to my arsenal of clock dividers and multipliers - you can never have enough clocks! This is a really sweet addition for anyone who wants to add complexity to their clock system in the euro-rack, since not only does it produce the 'standard' 2,4,8,16 divisions it also goes up to 32, 64 and 128. But if that wasn't enough, it offers prime number divisions, which can make for crazy off beat timings at 2, 3, 5, 7, 11 and 13.... not enough? Then it also does a straight count from 2 all the way up to 8.

The module is switchable to produce triggers or gate outputs too. All this in a tiny 4hp of rack space. Build quality is to the usual high standard offered by Dopfer; nice switches and smooth sockets. I have this sat next to a 4ms rotating clock divider and they compliment each other wonderfully. All in all a brilliant module for a great price. Doepfer rocks around the clock again!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality
Does what it it supposed to
1 BPM, 22.05.2021
At first I was a bit confused about the interpretation of "multiplier" and "divider", depending from what perspective. I mean, mathematically to divide means to make less and to multiply means to make more. But here it is the other way around ;-) Anyway, this module does not need a user manual, is straightforward to use as all explanation is printed on the device itself. Works like a charm. When patching to another hole, it first finishes off the current cycle, which for me is very neat.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-160-2 Clock Divider II
(31)
Doepfer A-160-2 Clock Divider II

Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

Doepfer A-124 Wasp Filter SE
(86)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

Doepfer A-180-2 Multiples
(103)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

Doepfer A-178 Theremin
(26)
Doepfer A-178 Theremin

Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20...

Doepfer A-151
(38)
Doepfer A-151

Quad Sequential Switch Module Electronic 4-position rotary switch, Trigger input, Reset input, 4 Inputs, 4 Outputs, Voltages of -8V to + 8V can be processed, Euro rack format, Width 4 HP, Depth: 35...

Doepfer A-199 Spring Reverb Module
(64)
Doepfer A-199 Spring Reverb Module

Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb...

Doepfer A-138M
(20)
Doepfer A-138M

Matrix Mixer With 4 rows and 4 columns, Unipolar / Bipolar mode switchable on each column, Suitable for both control voltage and audio, Width: 20 HP, Depth: 20 mm, Power requirements: +30 mA (+12...

Doepfer A-156
(45)
Doepfer A-156

Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous input control voltage in the range of 0 ... 10V into a stepped output voltage in the same...

Doepfer A-198 (Module + Manual)
(13)
Doepfer A-198 (Module + Manual)

Trautonium Controller Consists of Doepfer A-198 Module and Ribbon Controller, Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor,...

Doepfer A-156 Vintage Edition
(18)
Doepfer A-156 Vintage Edition

Dual Control Voltage Quantizer Vintage edition with black front plate, Converts a continuous input voltage into a stepped output voltage, Eurorack format, Width: 8 HP, Depth: 55 mm, Power...

Doepfer A-180-3 Dual Buffered Multiple
(42)
Doepfer A-180-3 Dual Buffered Multiple

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

£85
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.