Customer center login

Doepfer A-147-2 VCD LFO

Voltage Controlled Delayed Low Frequency Oscillator

  • Module consists of a voltage-controlled low frequency oscillator (LFO) and a voltage controlled amplifier (VCA)
  • Switchable to polarizer / ring modulator, and voltage-controlled linear delay envelope (only one parameter: Delay or Attack) for delayed LFO operation with voltage control
  • Width: 8 HP
  • Depth: 55 mm
  • Power requirement: +60 mA (+12 V) / -40 mA (-12 V)
  • Width: 8 HP
  • Depth: 55 mm
  • Power requirement: +60 mA (+12 V) / -40 mA (-12 V)

Further Information

Width 8 TE / HP
exponential No
linear Yes
27 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
5 /5
  • handling
  • features
  • quality
Total
handling
features
quality
a necessary tool for your modular
zombie-function, 18.04.2019
This doepfer module offers lots of functionality and has many uses.
With this module you get a VCLFO, VCA (switchable to voltage controlled polarizer) and a VC delay unit: voltage controlled linear attack envelope (only one parameter: attack) for delayed LFO operation in combination with the VCA.

I use it in audio and video modular patches, don't think there was any patch that I did not use it in.

The knobs are nice and stiff, so you can change values very slightly. Jack inputs are decent quality too.

A very interesting feature is that you can slow down the LFO period up to 3 hours or more by setting a jumper on the back (more info on the doepfer site). This is perfect for generative, experimental, drone music and generative video.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Doerfer on his game AGAIN
CraigW, 25.05.2015
as usual great build and feature packed.... no stone left unturned in this module
great foor FM as a modulator and responds well to cv itself
more than just an LFO.. i love it and it has ( for me ) eneterd my hall of fame DEAD HANDS modules
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality
Well engineered module
MassimoDavi, 20.02.2020
The Doepfer A-147-2 VDCLFO is the updated version of the A-147. Is a very well engineered module with plenty of features from VCLFO to VCA and the lovely VC delay unit for delayed LFO operation, which gives you interesting vibrato sounds once operated in combination with the VCA. Happy days!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
spacessound, 20.11.2017
intelligent improvement on the original A-147. Very flexible, used in every patch
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-147-2 VCD LFO
(27)
Doepfer A-147-2 VCD LFO

Voltage Controlled Delayed Low Frequency Oscillator Module consists of a voltage-controlled low frequency oscillator (LFO) and a voltage controlled amplifier (VCA), Switchable to polarizer / ring...

Doepfer A-160-2 Clock Divider II
(31)
Doepfer A-160-2 Clock Divider II

Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

Doepfer A-124 Wasp Filter SE
(86)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

Doepfer A-130-2
(20)
Doepfer A-130-2

Doepfer A-130-2; Eurorack module; compact two-channel VCA; per channel controls for initial gain and CV attenuator; per channel mute function and switchable characteristc from linear to exponential;...

Doepfer A-180-2 Multiples
(103)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

Doepfer A-135-2
(28)
Doepfer A-135-2

Eurorack Module Quad VCA / Voltage Controller Mixer, Compact version of the A-135-1, 4 Separate linear VCAs, each with CV input, signal input and signal output, Sum signal of all VCAs additionally...

Doepfer A-130-8
(7)
Doepfer A-130-8

Doepfer A-130-8; Eurorack module; Octal Linear VCA; 8 VCAs with linear response curve; suitable for audio signals and control voltage; sum-outputs for VCA groupd 1-4, 5-8 and 1-8; power consumption:...

Doepfer A-178 Theremin
(27)
Doepfer A-178 Theremin

Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20...

Doepfer A-151
(38)
Doepfer A-151

Quad Sequential Switch Module Electronic 4-position rotary switch, Trigger input, Reset input, 4 Inputs, 4 Outputs, Voltages of -8V to + 8V can be processed, Euro rack format, Width 4 HP, Depth: 35...

Doepfer A-156
(45)
Doepfer A-156

Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous input control voltage in the range of 0 ... 10V into a stepped output voltage in the same...

Doepfer A-199 Spring Reverb Module
(64)
Doepfer A-199 Spring Reverb Module

Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb...

Doepfer A-138M
(20)
Doepfer A-138M

Matrix Mixer With 4 rows and 4 columns, Unipolar / Bipolar mode switchable on each column, Suitable for both control voltage and audio, Width: 20 HP, Depth: 20 mm, Power requirements: +30 mA (+12...

£102
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.