Doepfer A-134-1 Vc Pan MKII
Voltage-Controlled Panning Module
The A-134 is a voltage-controlled panning module. The module consists of 2 linear VCAs, which are inversely controlled by a control voltage, i.e., the more the volume of one VCA increases, the more the volume decreases on the other VCA. The module has 2 audio inputs with an attenuator, which is assigned to both VCAs. If there is nothing plugged into the second input jack (VCA2), then the audio signal of VCA1 will also be used for VCA2. There are 3 audio outputs available: VCA1, VCA2, and Mix (a mixed signal of both VCA outputs). With the A-134, voltage-controlled stereo panning effects (VCA outputs on left / right stereo channels), mono panning effects (e.g., between 2 different audio signals), or a mixture of both functions can be implemented.
The panning function can be controlled manually and via two external control voltages (one of which is equipped with an attenuator). As control signals, the following can be used: LFO (A-145, A-146, A-147), envelopes (A-140, A-141, A-142, A-119), random (A-118), theremin (A-178), foot controller ( A-177), or the voltage of a MIDI-to-CV interface (A-190 or A-191). The panning function is displayed optically via 2 LEDs.
|Width||8 TE / HP|
These are other customers' choices:
Customers who looked at this item have bought these:
| || 52% bought this exact product |
Doepfer A-134-1 Vc Pan MKII
|£61 Add to Basket|
| ||12% bought Behringer 150 Ring Mod/Noise/S&H/LFO||£61|
| ||7% bought Doepfer A-138D||£50|
| ||7% bought Doepfer A-134-2 Dual Vc Crossfader||£50|
| ||6% bought Doepfer A-184-1||£71|
|Our most popular Ring Modulator, Crossfade Modules|
Voltage-Controlled Panning Module The A-134 is a voltage-controlled panning module. The module consists of 2 linear VCAs, which are inversely controlled by a control voltage, i.e., the more the...
Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...
Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Mini Stereo Mixer 4-in-2 mix module in Eurorack format, Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs, Width: 8 HP, Depth: 30 mm, Power requirements: +10 mA (+12 V)...
Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm
External Input / Envelope Follower Module A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator....
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Quad Sequential Switch Module Electronic 4-position rotary switch, Trigger input, Reset input, 4 Inputs, 4 Outputs, Voltages of -8V to + 8V can be processed, Euro rack format, Width 4 HP, Depth: 35...
Clock Divider Module Frequency divider for digital clock signals, 6 Outputs (input frequency / 2 - input frequency / 64), LED indicator for each output, Eurorack format, Width: 4 HP, Depth: 40 mm,...
Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb...
Wasp Filter Module A-124 is a special 12 dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black / yellow housing manufactured by the UK company...
|sales rank in this product group||8|
|sales unit||1 piece|
|available since||October 2004|
Compare Similar Items
We're looking forward to hearing from you and aim to solve any problems as soon as we can.