Customer center login

Doepfer A-110-1 Vintage Edition

VCO

  • Standard VCO for the A-100 modular system
  • Black front panel
  • Width: 10 HP / 50.5 mm
  • Depth: 55 mm (measured from the rear of the front panel)
  • Power requirements: +90 mA (+ 12V) / -20 mA (-12V)

Further Information

Analog Yes
Digital No
Width 10 TE / HP
variants Doepfer
7 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
5 /5
  • handling
  • features
  • quality
Total
handling
features
quality
Cheaper is not always less quality
Tunnel One, 10.10.2019
If you are even remotely interested in modular and eurorack synthesis, then Doepfer is a name you certainly know of. This brand is the epitome of "cheaper is not always less quality' if you ask me.

The doepfer range has been available for many years, and the new vintage styled modules are not different from their initial grey counterparts, but do look a lot nicer in my opinion :-)

The module is well built , solid quality, and sounds great. It has all basic features you'd expect, and is easy to install and use.

The doepfer VCO are great, and sound good, even compared to expensive modules.

This is a good option for both the experienced as beginning eurorack enthousiast.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
de Original review (Show translation)
Unfortunately there was an error. Please try again later.
Total
Standerd VCO
Son of MooG, 06.11.2016
Über den A-110-1 wurde ja schon ausführlich geschrieben und ich kann mich dem nur anschließen. Die Vintage Edition macht einen edlen optischen Eindruck und damit es auch so bleibt, sind den Montageschrauben passende U-Scheibchen aus PVC beigelegt, um den Lack um die Bohrungen herum zu schonen (wie bei allen VE-Modulen). Ich verwende den A-110-1 zusammen mit dem A-110-2 Basic VCO und einem Analogue Systems RS-95e VCO, die sich wunderbar gegenseitig ergänzen. Meine einzige Kritik ist der doppelte PWM-Input; hier hätte ich mir statt des ungeregelten Inputs einen Soft-Sync-Input wie beim A-110-2 gewünscht. Ansonsten bin ich sehr zufrieden damit.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
it Original review (Show translation)
Unfortunately there was an error. Please try again later.
Total
handling
features
quality
OTTIMO
MatteoP8, 06.08.2020
Usato per aggiungere un secondo oscillatore al Moog Mother 32.

Ottima fattura e suono, l'onda quadra è identica a quella del mother.
Escursione di diverse ottave per ottenere le sonorità più estreme. Preciso nell'intonazione e nella possibilità di modulare frequenza e Pulse Width.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-110-1 Vintage Edition
(7)
Doepfer A-110-1 Vintage Edition

VCO Standard VCO for the A-100 modular system, Black front panel, Width: 10 HP / 50.5 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +90 mA (+ 12V) / -20 mA...

Doepfer A-160-2 Clock Divider II
(31)
Doepfer A-160-2 Clock Divider II

Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

Doepfer A-124 Wasp Filter SE
(86)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

Doepfer A-180-2 Multiples
(103)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

Doepfer A-178 Theremin
(27)
Doepfer A-178 Theremin

Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20...

Doepfer A-151
(38)
Doepfer A-151

Quad Sequential Switch Module Electronic 4-position rotary switch, Trigger input, Reset input, 4 Inputs, 4 Outputs, Voltages of -8V to + 8V can be processed, Euro rack format, Width 4 HP, Depth: 35...

Doepfer A-111-4
(8)
Doepfer A-111-4

Quad Precision VCO Perfect for polyphonic or paraphone patches, Four precision VCOs with output mixers and a master control unit, Waveforms: Triangle, sawtooth and rectangle with individual...

Doepfer A-156
(45)
Doepfer A-156

Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous input control voltage in the range of 0 ... 10V into a stepped output voltage in the same...

Doepfer A-199 Spring Reverb Module
(64)
Doepfer A-199 Spring Reverb Module

Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb...

Doepfer A-138M
(20)
Doepfer A-138M

Matrix Mixer With 4 rows and 4 columns, Unipolar / Bipolar mode switchable on each column, Suitable for both control voltage and audio, Width: 20 HP, Depth: 20 mm, Power requirements: +30 mA (+12...

Doepfer A-198 (Module + Manual)
(13)
Doepfer A-198 (Module + Manual)

Trautonium Controller Consists of Doepfer A-198 Module and Ribbon Controller, Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor,...

Doepfer A-111-2 Vintage Edition
Doepfer A-111-2 Vintage Edition

Doepfer A-111-2 Vintage Edition; Eurorack module; High End VCO II / VCLFO; precise tracking over 10 octaves; wide frequency range: 0.5Hz - 20kHz in VCO mode, 0.001Hz - 40Hz in LFO mode; selection...

£137
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.