ADSR Envelope Generator
The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it generates an adjustable control signal called the envelope. This envelope is present on its outputs in normal and inverted S-form and can be used e.g. for modulation of VCO, VCF and VCA modules as well as for transient and decay oscillations of other modules. The S-form of the envelope is unambiguously defined by four parameters, attack, decay, sustain and release. The ADSR is triggered with a gate-signal at gate-input and provides the possibility of a retrigger-Function, i.e. the envelope will be restarted every time a trigger signal is present at the retrigger-socket while the gate is active.
In connection with the comparator-module A-167 a free run "ADSR-LFO" can be realised.
- Parameters can be set independently
- 3-Step switch for selecting the time range
- Eurorack format
- Width: 8 HP
- Depth: 50 mm
- Power requirements: +20 mA (+ 12V) / -20 mA (-12V)
|Width||8 TE / HP|
These are other customers' choices:
Customers who looked at this item have bought these:
| || 35% bought this exact product |
|£63 Add to Basket|
| ||17% bought Behringer 140 Dual Envelope/LFO||£89|
| ||11% bought Doepfer A-140-2||£119|
| ||7% bought Dreadbox Ataxia||£77|
| ||7% bought Behringer Dual Envelope Generator 1003||£48|
|Our most popular Envelope Modules|
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm
Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20...
Quad Sequential Switch Module Electronic 4-position rotary switch, Trigger input, Reset input, 4 Inputs, 4 Outputs, Voltages of -8V to + 8V can be processed, Euro rack format, Width 4 HP, Depth: 35...
Eurorack Module Dual ADSR, Two identical analog envelopes in one module, Per envelope: CV input with attenuator to control any parameter (selectable by jumper), Gate entrance, Retrigger input, 2...
Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous input control voltage in the range of 0 ... 10V into a stepped output voltage in the same...
Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb...
Matrix Mixer With 4 rows and 4 columns, Unipolar / Bipolar mode switchable on each column, Suitable for both control voltage and audio, Width: 20 HP, Depth: 20 mm, Power requirements: +30 mA (+12...
Trautonium Controller Consists of Doepfer A-198 Module and Ribbon Controller, Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor,...
Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm
|sales rank in this product group||19|
|sales unit||1 piece|
|available since||January 2004|
Compare Similar Items
Do you like what you're seeing?
Shop and pay safely
Payment can be made safely and securely with PayPal, Credit Card or Bank Transfer.