169 results. Displaying items 76–100.
The prices shown include VAT. Free Shipping Over €149
Compare Added (Remove)
No results were found :-(
One of your filters is filtering so well, that no products were found!
One of your filters is filtering so well, that no products were found!
You can remove your filters and start again or use the previous filter you selected.
Passive Stereo DI Box Midas transformer, 2x 6.3 mm jack inputs, 2x -15 dB pad switch, Ground lift, Neutrik XLR outputs, Sturdy, compact aluminium housing with protective, hard rubber corners, Frequency range (±1 dB): 20 Hz - 30 kHz,...
- Midas transformer
- 2x 6.3 mm jack inputs
- 2x -15 dB pad switch
Guitar Signal Receiver
Guitar Signal Receiver For use with the TC GLT transmitter: Article number 449229 (not included), For long cables of up to 100 m, Transformer insulated design, XLR input, Unbalanced 6.3 mm jack output, Passive construction, Dimensions (H x...
- For use with the TC GLT transmitter: Article number 449229 (not included)
- For long cables of up to 100 m
- Transformer insulated design
Multichannel DI Box with Line Mixer Frequency range: 20 - 20,000 Hz, Reduction of input signal -20 dB and -40 dB / channel, Earthing switch, Panorama slider and volume slider / channel, Headphone output (RCA), Robust metal housing, Dimensions:...
- Frequency range: 20 - 20,000 Hz
- Reduction of input signal -20 dB and -40 dB / channel
- Earthing switch
Instrument Preamplifier Fully analog, handmade DI box with high input impedance & clean boost for musicians playing two instruments at the gig, A / B Footswitch selects alternative instrument, Mode Switch allows alternative or simultaneous playback of both instruments,...
- Fully analog, handmade DI box with high input impedance & clean boost for musicians playing two instruments at the gig
- A / B Footswitch selects alternative instrument
- Mode Switch allows alternative or simultaneous playback of both instruments
DI Box for Guitar and Bass Amplifiers Connected between amp and speaker with the jack cable, Switchable Gnd-Lift, Switchable polarity 180°, Switchable bass extension for more low end when operating with electric bass, Integrated speaker emulation of a 4x...
- Connected between amp and speaker with the jack cable
- Switchable Gnd-Lift
- Switchable polarity 180°
Professional Stereo DI Box With Jensen transformers, Connectors: Jack in, RCA thru in, Jack / RCA thru and XLR in per channel, High-cut switch: 10 kHz, -15 dB pad and merge per channel, XLR in/out, 180° Phase reverse per...
- With Jensen transformers
- Connectors: Jack in, RCA thru in, Jack / RCA thru and XLR in per channel
- High-cut switch: 10 kHz
Active Guitar DI Box With a speaker emulation developed by Juergen Rath 4x 12", Jack input, Direct link out, XLR out, Galvanic isolation, -20/ 40dB PAD (up to 3000 W), Operatable via battery (9V) or phantom power (15 -...
- With a speaker emulation developed by Juergen Rath 4x 12"
- Jack input
- Direct link out
Load Box with DI Simple solution to take up the warmth and dynamics of your sound without putting microphones to a speaker during a gig or studio recording, Connected to tube amp instead of loudspeaker and loads it with...
- Simple solution to take up the warmth and dynamics of your sound without putting microphones to a speaker during a gig or studio recording
- Connected to tube amp instead of loudspeaker and loads it with 8 Ohm
- Generates a symmetrical as well as assymmetrical signal (without loudspeaker simulation) to be connected to recording devices, effects and power amps
Eight-channel stereo DI box For keyboards and a player device, 2x Jack in per channel, Insert and thru, 15 dB Pad per channel, XLR out, Switchable GND Lift per channel, 180° Phase reverse per channel, Rotatable rackmount, 19"/1U
- For keyboards and a player device
- 2x Jack in per channel
- Insert and thru
1-Channel Isolating Transformer Cast aluminum housing, Jack input and output, Ideal for dejamming of guitar racks, 5 year manufacturer's warranty
- Cast aluminum housing
- Jack input and output
- Ideal for dejamming of guitar racks
Preamp Microphone preamp and DI box with compressor, Two channel operation with crossfading, Silk-circuit, Microphone gain up to 66 dB, DI-Gain up to 30 dB, Balanced / unbalanced Hi-Z input, 48 V Phantom power, Phase reversal, Threshold control in...
- Microphone preamp and DI box with compressor
- Two channel operation with crossfading
Adapter for blocking phantom power
Adapter for blocking phantom power XLR 3-pin male to XLR 3-pin female, Phantom power is blocked - audio signal remains intact, Works in both directions, Protects microphone preamps, microphones and device outputs from phantom power
- XLR 3-pin male to XLR 3-pin female
- Phantom power is blocked - audio signal remains intact
- Works in both directions
Active DI Box (Battery/Phantom) Connections: XLR /jack in, jack link, XLR out, Frequency response: 10 Hz - 50 kHz, Output-ground lift, PAD -15/30 dB, Galvanic isoolation, Dimensions: 45 x 77 x 152 mm, Weight: 0.59 kg
- Connections: XLR /jack in, jack link, XLR out
- Frequency response: 10 Hz - 50 kHz
- Output-ground lift
Active Stereo Direct Box Suitable for stereo sources such as keyboards, media players, etc., High impedance 6.3 mm jack input with thru output and 20 db pad, Balanced XLR output with ground lift, low cut and polarity switch, Merge...
- Suitable for stereo sources such as keyboards, media players, etc.
- High impedance 6.3 mm jack input with thru output and 20 db pad
- Balanced XLR output with ground lift, low cut and polarity switch
Line Level Converter Converts 2x unbalanced RCA in 1x balanced XLR male, Suitable for line devices, such as laptops, CD players etc. to microphone input of mixers/stageboxes
- Converts 2x unbalanced RCA in 1x balanced XLR male
- Suitable for line devices, such as laptops, CD players etc. to microphone input of mixers/stageboxes
Active 2-Channel DI-Box Switchable pad: 0/-30 dB, 2 Jack inputs, 2 Jack link outputs, 2 Balanced XLR outputs, Balanced XLR mix output, Switchable ground lift per channel, Input impedance: 1 MOhm, Output impedance: 200 Ohm, Max. input level: +45...
- Switchable pad: 0/-30 dB
- 2 Jack inputs
- 2 Jack link outputs
Stereo Signal Converter Converts balanced signals (XLR) into unbalanced signals (jack / RCA / mini-jack), Switchable ground lift, Adjustable output level, Robust metal housing, 2 XLR female inputs, 2 Jack outputs, 2 RCA outputs, 3.5 mm mini-jack output, Jensen...
- Converts balanced signals (XLR) into unbalanced signals (jack / RCA / mini-jack)
- Switchable ground lift
- Adjustable output level
Passive Mono Direct Box Ground lift switch, Phone input, Jack Thru, XLR output, Metal housing
- Ground lift switch
- Phone input
- Jack Thru
Passive Stereo DI Box With adjustable input level, Frequency range: 30 - 20,000 Hz, 2x 6.3 mm jack inputs, 2x RCA inputs, 1x 3.5 mm stereo jack input, XLR L/R output, Switchable Ground/Lift, Robust metal housing
- With adjustable input level
- Frequency range: 30 - 20,000 Hz
- 2x 6.3 mm jack inputs
Passive Mono DI BoxPalmer ADIG-LB is the consistent further development of our legendary speaker simulator PDI03, which has proven itself worldwide in the recording studios and by well-known artists such as Keith Richards / Rolling Stones, Alex Lifeson / Rush,...
- Loadbox: jack input for loudspeaker signal with parallel jack for looping the signal, if a loudspeaker box is to be connected (as monitor in stage operation).
- Input impedance of the load box: 8 Ohm, max. Input power 120 W RMS
- Display of input power: 6-pin LED chain
Y-Box Guitar SplitterPALMER Y-Box, splitbox for guitar signals. "When I am connecting the inputs of my two amplifiers, there is a strong hum." A frequent query in the technical section of relevant specialist magazines. The solution to this problem is...
- Clinking input with 1 Mohm input impedance
- Output AMP1 as parallel circuit
- Output AMP2 is electronically converted with a subsequent transformer stage
Active DI Box Specially for piezo users of orchestral instruments, Smooths out peaks, 48 V Phantom power, Handle in, Jack out, XLR out, Switchable HPF, Switchable 180° phase, Metal housing, Colour: Brown
- Specially for piezo users of orchestral instruments
- Smooths out peaks
- 48 V Phantom power
Passive DI Box Suitable for keyboard, A / E guitar, bass, etc., PAD switch (- 20 / -40 dB), Ground-lift switch, Inputs: 6.3 mm jack and XLR, Outputs: XLR and 6.3 mm jack Link-Out
- Suitable for keyboard, A / E guitar, bass, etc.
- PAD switch (- 20 / -40 dB)
- Ground-lift switch
Line Isolation Box 2-Channel isolation transformer, Diecast aluminium housing, RCA inputs and outputs, Ideal for suppressing hum loops in hi-fi racks or eliminating light machine noises in the car hi-fi range, 5 Year warranty
- 2-Channel isolation transformer
- Diecast aluminium housing
- RCA inputs and outputs
Twisted DI Box Direct Injection Box Converts a balanced signal into an unbalanced signal, Single channel, XLR female in, Jack out, Switchable GND lift, Max Input Level 6 dBu, Max. Output 6 dB, 20-20,000 Hz, Dimensions: 110 x 35...
- Converts a balanced signal into an unbalanced signal
- Single channel
- XLR female in
Offers include 20% UK VAT and are valid only whilst stocks last. Delivery to the UK costs 10 EUR (approx. £9), free shipping on orders above 149 EUR. Please click here for more on international delivery costs and times. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Feedback Found an error or want to give us feedback about this page?
We're looking forward to hearing from you and aim to solve any problems as soon as we can.
© 1996–2019 Thomann GmbH Thomann loves you, because you rock!