Behringer Xenyx 1202FX


12-Channel Mixer with Effects Processor

  • 4 Microphone inputs with phantom power, 3-band EQ, low cut and peak LEDs
  • 4 Stereo inputs
  • Internal 24-bit multi-effects processor
  • Master fader
  • Master out via jack
  • 1 Post-fader AUX path
  • 2 Track input and output
  • 1 Adjustable CTRL output
  • Headphone output
  • External power supply
  • Dimensions (H x W x H): 47/37 x 242 x 220 mm
  • Weight: 1.35 kg
  • Suitable case: Article no. 251438 (not included)
  • Suitable bag: Article no. 481188 (not included)
Parallel usable Channels 8
Mic Ins 4
Stereo Ins 4
Master Out 6,3 mm unbal.
Number of Pre Aux max. 0
PC Interface No
Multitrack Recording No
USB/SD Direkt Record No
Effect Processor 1
USB Play No
Bluetooth Play No
Foot Switch No
Matrix Mixer No
Zones 0
19" Rackmount No
available since May 2006
Item number 191257
sales unit 1 piece(s)
Width 220 mm
Depth 242 mm
altezza 47 mm
Weight 2,1 kg
Mono Line Ins 4
Hi-Z Input 0
Phantom Power 48V
Aux Ways 1
Interface Input 0
Interface Output 0
Rec Out (Analog) 1
Panorama 1
Lamp Connector No
Rackmount No
110V Power Supply No
Thomann Case 251438
Thon Case No
Gigbag No
Show more
Including VAT; Excluding £8 shipping
In stock
In stock

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Behringer are on the right track IMHO
Anonymous 27.11.2016
I have a Behringer mx1602 from back in the day and it has taken a heck of a lot of abuse. I used it for almost everything and even as a feedback/no-input mixer at one stage. It has served me well and I never had an issue with build quality or reliability. I understand I may have been very lucky as others have had issues in the past. I have had a Behringer Adat die just out of warranty so I know there were issues before.

I believe that was in the past. I needed multi outs from my Eurorack system to stereo out and as portability was the number one concern the 1202fx was the perfect size and offered a lot of features for crazy little money so I decided to take a chance on it! Thomanns warranty was the deciding factor as I knew should issues arise I would be looked after.

Im so glad I went with this - enough inputs for my needs, the fx while not earth shattering offer a nice flavour and enough gain to easily handle my Eurorack. Certainly MUCH cheaper than buying multiple mixer modules I didn't have the space or money for.

Pros - cost per input ratio. Simply can not be beat. Fx are a nice extra (but dont get this just for them as fx mix is all you get). Seems nicely built and sturdy. Gets a little warm but it is so small its insane. Low cost without low features. An all round winner for me.

Cons - I don't know if Behringer can ever be mentioned without reference to their past build quality. I believe and hope these issues are a thing of the past but the additional Thomann warranty period should ease any worries on that score.

The PSU of my trusty mx1602 died and it was almost cheaper to get this than try hunt down a replacement PSU - plus it has additional features and Thomanns warranty!

Some people will see the Behringer logo and be put off - I need reliable inputs/outputs more than labels so for me this is perfect - so far!


Excellent for a small acoustic group.
Anonymous 12.11.2014
This is an excellent little mixer, brilliant value, and does everything I wanted. I'm using it with a small PA (actually a Behringer D205 active monitor) because I wanted more inputs and some reverb. I recommend it and would buy another, in fact if I wanted to expand my PA with more inputs I would just get another of these and run them as a pair.

I don't like the way manufacturers use silly code numbers to imply more channels than you really get, It's a 4-channel mic mixer with up to 4 mono/stereo line inputs, some of which may be used up by signals from your own system, eg fx return or a second mixer..


It's as small as it could be given the number of channels etc. Looks neat and professional.

The sound quality seems to be fine, no perceptible noise and everything sounds much the same as when plugged directly into the PA's built-in mixer. I'm using good quality mics (SM58) and an L.R.Baggs guitar pickup.

The three band EQ works pretty well, In some situations I need to compensate for a bit of resonance in the guitar sound and this is enough.

It's ideal for us as an acoustic duo (Guitar + Voice + Clarinet) and I can see it would work pretty well for some larger groups.

We use two or three mics and a guitar so the four main channels are perfect.

I've tried it with an additional small mixer feeding into one of the line channels and that all works well with no apparent noise so you can expand your mixing capacity easily, an obvious route would be a second one of these.

Phantom power is provided if you need it. I have a condenser mic and I've used it with phantom power alongside Shure dynamic mics. Some people have misgivings about phantom power damaging other mics but the expert opinion seems to be that's it's not an issue with good modern kit.


The reverb is pretty crude, comparing it with the reverb in my basic Cakewalk DAW which gives a rich spacey effect, this one sounds pretty "clangy" So I only use a little bit to compensate for a 'dead' room.
The whole effects unit is a bit of a problem as there is no documentation (the manual refers to an appendix with more info about fx but I can't find that anywhere and I've searcheds the Behringer website), many presets appear to have little or no effect and you have no control over any parameters.
So it's only useful as a very simple reverb or echo unit with ten presets of increasing impact for each of those.
Compared to the Copicat I had in the 1970s it's not a very sophisticated thing. But the additional cost compared to the equivalent Behringer mixer without effects is a lot less than a cheap reverb unit so I can't complain too much. It's possible to route the fx signals through an external reverb unit if that was important for you.

I'd like to see some EQ on the line channels. That would allow more control of pickup signals from acoustic instruments and the mixer would then be very suitable for folk club type gigs with a variety of performers. But mixers with that amount of control are more expensive and bigger so I guess it's a trade-off.

The little black gain controls on the mic channels are very hard to see and you might want yo put a little white or silver ink/paint on the indicator ribs to be able to see what's going on.

So very good value in a neat package and I'm extremely happy.


Almost perfect piece of equipment.
Gerard-Inibara 21.12.2020
I already had a Behringer mixer without FX and two XLR inputs but wanted to expand with a similar mixer but with FX capabilities. Three remarks: 1. Setting PAN EQ and FX values is simple at the four MIC input channels but a little bit too compact for the remaining other stereo inputs. You need a torch to see the values and numbers. 2. The manual showed the specifications of a Keyboard (!!!) instead of from the mixer. 3. The manual does not include an overview of the 99 FX settings. For the rest: I love it!


Good budget mixing deck
Gbmitch 08.06.2020
Nice product at a very good price. Sound quality seems good and whole device looks good and feels robust.
The power plug in the rear of the unit takes a good push to get the plug fully in. As a rough guide when fully in the tip of the arrow on the plug sits inline with the outside of the casing.

Built in effects seem reasonable for vocals. You can only select 1 effect at any time. I would use this for the vocals only turning the effects on other channels off .

You could probably use this mixer for small gigs with only powered speakers and accomodate the whole band. 4 mic inputs (can be used for guitars also) and 4 stereo input channels (can be used as mono plugging in to left input only).

Supports balanced an unbalanced inputs and phantom power and xlr inputs are a plus.
The mic inputs incorporate mic preamps with adjustable gain, 3 band EQ and bass cut

Overall very satisfied


YouTube on this topic