Customer center login

Behringer CP35 Attenuators

Eurorack Module

  • 4 Passive attenuators with normalised inputs
  • 4 Outputs for a fixed reference voltage (2x +6 V and 2x -6 V)
  • 2 Passive 4-jack multiples
  • Current draw: 1 mA (+12 V) / 1 mA (-12 V)
  • Width: 21 HP
  • Depth: 35 mm

Further Information

Modul Type Mono
5 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • handling
  • features
  • quality
Total
handling
features
quality
Very useful sub control CV line.
toshino, 25.05.2021
This module divide 3 areas.
Upper area is ATTENUATORS,
This area function same to "995 ATTENUATORS" , but this CP35 has 4 volumes and outputs.
Normally use Attenuators, input signal add upper left side inputs, and return each gain down control voltage with volume, and output to down side .

Next one is CP35 only.
If you want to change the control voltage BASE LINE voltage to UP or DOWN, you patch -6V or 6V to OUTPUTS connector, you can change the control voltage center up to 6V and down to -6V.
This function create a new sound effects.
(some module has electric crash from outside HIGH voltage, please check and use carefully. As your own risk.)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality
Good Replica
Alvino, 24.07.2020
The attenuators are bidirectional (this is not obvious). However there are only two each of the -6V and +6V outputs. I use the -6V output to bias my 921 Oscillator or 921A Oscillator Driver so that the control knob is closer to zero when summed with the keyboard CV. The multiples are handy.

I do wish that the voltage bias outputs were independently buffered.

Obviously there is space on the panel for more functionality, but this is supposed to be a Moog System 55 replica so not so much. Therefore instead of knocking off 2 feature stars I only knocked off 1.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Behringer CP35 Attenuators
(5)
Behringer CP35 Attenuators

Eurorack Module 4 Passive attenuators with normalised inputs, 4 Outputs for a fixed reference voltage (2x +6 V and 2x -6 V), 2 Passive 4-jack multiples, Current draw: 1 mA (+12 V) / 1 mA (-12 V),...

Behringer 305 EQ/Mixer/Output
(10)
Behringer 305 EQ/Mixer/Output

Eurorack Module 4-Channel mixer, Signal input, volume fader, and panorama control per channel, Mono EQ (normalised to mixer input 1) with 4 parametric bands and bypass switch, Output section with...

Behringer CP3A-M Mixer
(31)
Behringer CP3A-M Mixer

Eurorack Module 4 Inputs with volume control, Master gain control, 4 Parallel master outputs (2x inverted), 2 Integrated passive 4-jack multiples, Width: 14 HP

Behringer 297 Dual Portamento/CV Util.
(7)
Behringer 297 Dual Portamento/CV Util.

Eurorack Module 2 Portamento sections, Each section with signal input / output and adjustable portamento time (10 ms - 3 s) and CV input, Two mixer sections, each with 4 channels, normal and...

Behringer 995 Attenuators
(5)
Behringer 995 Attenuators

Eurorack Module 3 Separate attenuators, Each with input and output, Suitable for CV and audio signals, Width: 8 HP

£71
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
test results:
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.