Thomann Xtreme Case

Case for Xtreme Guitars

  • For Xtreme guitars - e.g. Randy Rhoads, Warrior, BC Rich Ironbird + V, etc.
  • Sturdy, tour-worthy wooden case
  • External reference: Black Tolex
  • Sturdy plastic handle
  • 4 Robust hinges on the back
  • Two solid lockable fasteners
  • Two drawbolt latches
  • Metal feet
  • Solid, wide neck support with additional padding
  • Inner edges reinforced with foam rubber and additional shock protection
  • Thick foam insert in the middle of the lid
  • Separate inner compartment with lid
  • Black velvet interior
  • Interior dimensions 116 x 43 x 9 cm
  • Weight: 6.0 kg

Note: Not suitable for guitars with nitrocellulose lacquer.

Further Information

Colour Black
Cases For ST-Style Guitars No
Cases For T-Style Models No
for double cut models No
Cases For V-Style Guitars No
foe semi-hollowbody models No
for single cut models No
Cases For Jazzguitars No
For Other Models Yes

These are other customers' choices:

Customers who looked at this item have bought these:

Thomann Xtreme Case
33% bought this exact product
Thomann Xtreme Case
In stock within 1-2 weeks
In stock within 1-2 weeks

This item is expected back in stock soon and can then be shipped immediately.

Standard Delivery Times
£50 Add to Basket
Thomann E-Guitar Case ABS
20% bought Thomann E-Guitar Case ABS £48
Thomann E-Guitar Case BK Wood
9% bought Thomann E-Guitar Case BK Wood £35
Thomann E-Guitar Case ABS Single Cut
7% bought Thomann E-Guitar Case ABS Single Cut £41
Thomann E-Guitar Case Tweed
4% bought Thomann E-Guitar Case Tweed £44
Our most popular Electric Guitar Cases
516 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.3 /5
  • handling
  • quality
Total
handling
quality
stobbsyboy, 27.12.2020
I really only bought this to help sell & ship a guitar in so I haven't had much actual "use".

First impressions are overall good - tolex work, lining, padding etc. all well done.

Has the typical latches you find on cases in this price range, they work but they have that certain lower quality feel to them you don't find on the likes of fender and gibson cases for example.

I used it to ship an EVH shark shaped guitar, there was a lot of movement but the supplied extra pad "bar" helped greatly, but it needs a lot of padding to secure it inside the case if you are using it for shipping.

If the case were knocked over in normal use I would be concerned about headstock cracks or possible even full blown breaks, so while it would offer good protection from things hitting the outside, fairly serious drops would be cause for concern. Obviously not as protective as a fully form fitting case but they can be considerably more expensive - think you would need to shell out a couple hundred for a fitted explorer gibson case.

There's always a bit of compromise when the price is factored in, it works, but feels like it possesses the bare minimum it needs to work and more effort was put into it looking right.

The guitar I shipped arrived perfectly safe with all the extra padding and I was able to use the box the case shipped in, I used Hermes and in the UK they do have a reputation for mistreating parcels, so it functioned well in that capacity at least.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
A good case!
jrakus, 16.09.2020
I bought this for a Harley Benton EX-76 (2020 model). It fits the guitar ok but leaves some space. The longer horn has to be supported by the additional cushion. A small cushion comes with the case - this is great! I wish there would be 2 cushions, one small one bigger.
Above the headstock there is 6cm space for which I will make another cushion. But the guitar doesn't move anyway.
The neck support could be wider. Its also a little to high ..you have to modify it a little.
The case is not made exact. Quality is not great. The upper cover doesn't close completely because its not aligned well with the lower part. you have to press it together.
Overall the case looks nice.
The case is well balanced. It tilts forward without the guitar but with the guitar it evens out. The latches close ok. Handle seems sturdy.
The inner fabric is short haired plush (or velvet). The padding around the edges is 1cm thick and in some places thicker to support the body and press the neck.
The inside smells of somekind of glue / petroleum. Guitar smells after being in the case. I'm sure it will go away over time.

To be clear - the case is ok for this guitar even without modifications. It holds the guitar without moving. But it's clearly made for the big explorers and bigger guitars.

It's ok for me for the price.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Great for storage and carry around
Jackfisher, 25.05.2020
I bought two of these for my Ibanez XPT700 and my ESP LTD EX351.
Both guitars fit about 99%, the case comes with a small pad inside that you can just put anywhere, so for a perfect fit I just put the pad between the edge of the guitar and the edge of the case.
The quality is much better than I could ever expect from a 60€ guitar hard case. It's nicely padded, the locks feel high quality and just the overall look of the case is really nice.

It's not a flight case, I wouldn't try to use it as one, the wood is relatively thin, it is thick and sturdy enough to safely store the guitar and for taking it to gigs about of the house in a car, but I wouldn't trust airport workers with it.

The one feature that I didn't like is the cheap looking "leather" binding on the sides which feels cheap and it's kind of loosely fitting on the sides of the case, on both my cases the binding was rather weak and I feel like I should maybe open it up and inject some glue into it just to make sure that it won't come apart.

So 9/10, but at this price and what you actually get for it, it's the best value for the money!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
quality
Completely adequate, especially for this price!
Keith Norris, 30.05.2019
I bought this case for my Epiphone Explorer. Because it an aftermarket case intended to accomodate a variety of oddly shaped guitars, it can't reasonably be expected to precisely fit the instrument. However, due to a clever piece of moveable padding (included with the case) it is possible to prevent my Explorer from moving around too much. This is not a high-end road case (I didn't expect it to be for this price), but it provides perfectly adequate protection for the guitar while storing it or transporting by hand/in an automobile. Very good value for the money. And as always with Thomann, excellent service and fast shipping.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
£50
Excluding VAT; plus £8 shipping
In stock within 1-2 weeks
In stock within 1-2 weeks

This item is expected back in stock soon and can then be shipped immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Online Guides
Guitar Accessories
Guitar Accessories
We investigate some of the many accessories available for both guitar and bass.
 
 
 
 
 
Downloads
 
 
 
 
 
test results:
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in GBP.
11
(11)
Recently Viewed
Audient iD4 MKII

USB-C Audio Interface 24 bit / 44.1 - 96 kHz, ADC dynamic range: 121 dB, DAC dynamic range: 126 dB, @Class A Audient console microphone preamplifier, Mic Gain 58 dB,

Recently Viewed
Alesis Nitro Expansion Pack

Expansion set for Alesis Nitro Mesh Kit Consist of 1x 10" One-Zone Pad and 1x 08" ON zones Tom Pad, Includes necessary rack clips, cymbal holder, L-rods and cables

Recently Viewed
L.R.Baggs Voiceprint DI

Impulse Response di pedal for acoustic guitar Voiceprint DI measures the acoustic response of your guitar by leveraging the processing power of your iPhone® to accurately capture your guitar’s one-of-a-kind voice., Notch filter, Anti-feedback function, Phase circuit, Serial FX…

Recently Viewed
Fender Dhani Harrison Ukulele Tq

Tenor Ukulele with Pickup Dhani Harrison Signature Model, Size: 3/4, Top: solid Ovangkol, Back and sides: Ovangkol, Neck: NATO, Fretboard: Ovangkol, Phases of the moon fretboard inlays, Back with engraving, Nut width: 35 mm (1.375"), 19 Frets, Pickup with…

Recently Viewed
Otamatone Neo White

Otamatone Neo, Electronic sound toy / synthesizer, standard size, selection of various sounds via new studio smart phone app, cross link of smart phone and Otamatone via cable, power plug for external power supply, stereo headphone jack, volume adjustable, playing…

1
(1)
Recently Viewed
iZotope Spire Studio 2nd Generation

iZotope Spire Studio 2nd Generation; mobile recording studio with lithium-ion battery (up to 4 hours runtime); 2 tracks can be recorded simultaneously; up to 8 tracks per project can be played back; recording format: 24-bit / 48 kHz; up to…

Recently Viewed
Sonor SS 1000 Snare Stand

Sonor SS 1000 Snare Stand, 1000 hardware series, gearless basket adjustment, double braced, stable rubber foots,

Recently Viewed
Endorphin.es Ground Control

Endorphin.es Ground Control; Eurorack module; performance sequencer; 24-pads keyboard for realtime programming; USB-B port and MIDI in/out for using external MIDI devices and DAW integration; 3 melodic tracks with CV/Gate outputs; 8 drum tracks with trigger outputs; 24 pattern per…

1
(1)
Recently Viewed
Sonarworks SoundID Reference Headphon EDU

Sonarworks SoundID Reference for Headphones EDU (ESD); headphone calibration plugin; Educational version: requires proof of eligibility; adjusts the frequency response to get a flat and neutral sounding headphone; enables a more precise evaluation of recordings and mixes when using an…

Recently Viewed
Electro Harmonix Ripped Speaker Fuzz

Electro Harmonix Ripped Speaker Fuzz; Effects Pedal for Electric Guitar & Bass; low Fuzz settings emulate Vintage Lo-Fi Distortion Sounds created by a Razor Blade applied to a Speaker Cone, a loose Tube or a faulty channel on a Recording…

Recently Viewed
Otamatone Neo Black

Otamatone Neo, Electronic sound toy / synthesizer, standard size, selection of various sounds via new studio smart phone app, cross link of smart phone and Otamatone via cable, power plug for external power supply, stereo headphone jack, volume adjustable, playing…

Recently Viewed
Zoom PodTrak P4

Podcasting Recorder Four microphone inputs (XLR, P48V phantom power switchable), Four headphone outputs with individual volume controls (3.5mm stereo jack), Gain control and mute button per input, Mix minus function for automatic feedback suppression for incoming calls, Connection of…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.