Mojotone CTS 500K Std. Split P/P VT Pot

37

Potentiomètre pour guitare/basse

  • Commutateur Push/Pull intégré
  • Courbe de résistance logarithmique
  • Fabriqué avec les exigences de qualité les plus élevées possibles de CTS
  • Résistance DC: 500 kOhm
  • Axe splitté moleté (24 dents)
  • Diamètre de l'axe: 6 mm
  • Longueur du filetage: 9,5 mm
  • Diamètre du filetage: 9,5 mm
  • Diamètre du boîtier: 23,8 mm
  • Rondelle, rondelle frein à languette et écrou incl.
Référencé depuis Novembre 2020
Numéro d'article 494193
Conditionnement (UVC) 1 Pièce(s)
Type Axe moleté
Résistance 500 kOhm
Caractéristique Vintage Taper
Longeur du filetage 9,5 mm
Potentiomètre tandem Non
Push/Push Push/Pull
Sans soudures Non
Type d'axe Cranté
13,70 €
TVA incl. ; Supplément de 5,90 € pour l´envoi
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
Expédition estimée le Samedi, 30.03.
1

37 Évaluations des clients

4.8 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Qualité de fabrication

29 Commentaires

s
excellent
staxbassman 31.03.2021
Fabrication parfaite . très facile à installer et très bon fonctionnement
Merci
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

J
guitare métamorphosée
JCP1 18.02.2023
ça + changement potards et belles soudures optimisées = guitare métamorphosée incroyable !
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
NG
Excellent as a tone pot, tight fit!
Newbie Guitar Player 09.06.2022
I bought this as part of a pickup swap / rewiring job on my Squier Mustang HH. I installed it as a tone pot and wired the push-pull switch for splitting the bridge humbucker (neck position is a P90). The PCB makes it really easy to wire the P/P. There was also some space between the PCB and the pot itself to tuck in my capacitor and retain the original profile. Do beware that it is a full-sized pot and quite bulky, more so because of the P/P. Be careful and measure your guitar cavity before buying. The Mustang control cavity was a realy tight fit and I had to modify the part a bit by bending the two prongs at the top. I also routed the cables around the pot as there was no space behind/underneath it. The control plate on the Mustang is relatively thin sheet metal and the pot sticks up a bit above the surface, but that doesn't really bother me. Luckily I had no issues with the thread diameter and it dropped right into the control plate opening - no wobble, no need to enlarge the opening. For the knob I used a metal screwable one that has a smooth inside surface and is made for 6mm shaft. If you want to get a knurled knob or re-use your old knob, check your measurements and make sure it has the correct number of splines for the US standard.

Overall I am really satisfied with my purchase, even though I had some minor issues with the fitment. The pot functions well and I am happy with the tone responce I get from the vintage taper in conjunction with a 47nF capacitor. It rotates smoothly and doesn't scratch. Push-pull works as expected. As with any guitar mod, my advice is to measure carefully and be prepared to adjust some things if necessary.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
S
Nice pot
StephanPK 27.01.2022
Big, easy to solder, but could not fit if you have small guitar cavity, so check it before you buy it
Qualité de fabrication
1
0
Signaler l'évaluation

Signaler l'évaluation