Doepfer A-100 LC1 Low Cost Case

27

Boitier Doepfer économique

  • Similaire au modèle LC3 avec 48TE pour modules A-100
  • Alimentation interne A-100SSB (+12V/340 mA, -12V/340mA)
  • Panneau de connexion fourni avec 12 ports pour modules
  • En bois brut non verni (peut être peint ou verni par l'utilisateur)
  • Tension principale 110 / 240 Volt
  • Dimensions internes: 1x 48 TE x 3 U
  • Entrée alimentation IEC à l'arrière, cordon non fourni!
Référencé depuis Mai 2017
Numéro d'article 413503
Conditionnement (UVC) 1 Pièce(s)
Système Eurorack
Largeur 48 TE / HP
Hauteur 3 U
Alimentation Oui
Format Flight case
Spécifications de l'alimentation +12V/380 mA, -12V/380 mA, +5V/100 mA, 380 mA max. pour +12V et +5V
176 €
Envoi gratuit et TVA incluse.
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
Expédition estimée le Jeudi, 25.04.
1

27 Évaluations des clients

4.6 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Caractéristiques

Qualité de fabrication

19 Commentaires

PV
Pas d'interrupteur
Petit Village 27.03.2022
Très bon produit, pratique il n'y a pas à construire soi-même, dommage qu'il n'y ai pas d'interrupteur, j'y ai installé une voix de synthé complète et indépendante mais je n'en ai pas toujours besoin et ça reste allumé avec le reste...
Caractéristiques
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

B
Pratique et nomade
Beeblebrok 18.12.2021
Solide, très pratique pour emmener un petit setup en vacances, ou pour mettre à part des autres cases des utilitaires (ex interfaces midi, sortie casque etc.). Je me suis juste posé la question de savoir si le connecteur secteur serait mieux sur la face arrière, mais cela empêcherait d'en avoir deux juxtaposés. Et puis c'est plus discret comme ça. Les prises modules avec détrompeur sont un plus.
Parfait pour moi.
Caractéristiques
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

L2
Bien
Les 2 ATeliers 14.08.2019
Bien conçu, un des moins cher, fait le boulot pour quelques modules. Est transportable facilement.
Caractéristiques
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
T
Great choice for a small setup
Tanj 09.07.2022
I wanted to put together a small Eurorack setup and this case is perfect. It's small & portable, plus the wood is unfinished so you can paint or varnish it any way you like.
It has just about enough power to run enough modules to fill it, I would have preferred a power switch which is the only reason it drops a star (the power is always on when it is plugged in) but it works great.

I intentionally wanted a case that would limit the amount of modules I could buy because Eurorack has the capacity to be a never-ending cash sinkhole! So this case forces you to think carefully about what kind of setup you need and to choose your modules carefully.

I was going to buy the Cre8 NiftyCase, which is a bargain especially considering it has MIDI-CV conversion built-in but unfortunately it was too shallow for some of the modules I wanted and I didn't want that limitation. So I bought this with a separate Kenton MIDI-CV converter.

When buying a Eurorack case, there are three main things to consider:
1. The depth - different modules have different depths and some shallow cases won't house certain modules. This has the depth needed for pretty much any module, although the right-hand side of the case has power components on the right side so the depth is more limited for a few HP on this side of the case. This shouldn't be a problem, most people will choose modules of different depths so you just put the shallower ones on this side.
2. Power rating - a case's power rating needs to put out enough current to power all the modules you are planning to buy, you need to add up all the power requirements of all the modules you are considering for purchase to make sure the case can power them all.
3. Size - different modules are different sizes in width, so you need to add up the width (measured in HP) of all the modules you are planning to buy & make sure you can fit them all in.

If this case fulfills all of that criteria for you, it's an excellent choice and I can fully recommend it. Good luck and have fun on your Eurorack journey!
Caractéristiques
Qualité de fabrication
2
0
Signaler l'évaluation

Signaler l'évaluation

Vidéos YouTube associées