Radial Engineering Tonebone Dragster
Tonebone Radial Dragster
Tonebone Radial Dragster is a very special piece. What it does, can be briefly summarised. As soon as you go directly from the guitar over a (good and not too long) cable directly into the input of the amp, the sound suffers losses. Often it is loudness and highs, occasionally also the heat can suffer. Regardless of whether you are playing through channels or effects; The dragster corrects the impedance so that the amp gets a signal as with a direct cable connection. Simply adjust the desired impedance and the full sound is already established, which otherwise can only be achieved with guitar cable amp solutions.
Simply plug in the guitar strap (for example, in front of the transmitter) or, if you are using a cable in a pedalboard, before the first pedal and use the drag control to fumble the optimum sound.
- Easiest operation
- Completely passive
- Smallest dimensions 60 x 53 x 25 mm
- For attachment to guitar strap or pedalboard
- Jack input and output
Odotamme palautettanne ja korjaamme mahdolliset virheet pikimmiten.