Harley Benton PartsPickguard SSS Parchment A

166

Pick guard

  • For ST-Models
  • 11 Holes
  • SSS fit, for 3 Single Coils
  • 3-Ply
  • Colour: Aged White
Myynnissä vuodesta Helmikuu 2010
Tuotenumero 243424
Myyntierä 1 kappaletta
Pickup Placement SSS
Colour Cream
9,90 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Torstai, 28.03. mennessä
1

166 Asiakkaiden arviot

4.6 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Työnjälki

96 Arvostelut

e
The color is MINT GREEN..
eliel 29.03.2018
I am completely happy with the quality and looks of this pickguard, BUT: it is mint green. I have a fender mint green pickguard so I can compare, it is almost exactly the same.

On another note: Thomann should really pay attention to the web page of this product. It says THREE DIFFERENT COLORS for this products: parchment, aged white, cream. The one I received isn't even any of these three, but mint green.

Since Thomann hasn't got an actual parchment pickguard in this price range, there is no reason for me to return this.. Don't get me wrong, it's a great looking guard, but not even close to the way it is described.
Työnjälki
1
1
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
f
Supreme Quality for the money
fjomatias 08.02.2018
So I wanted to renew the visual of my Harley Bentons ST62 in vintage white. It came with a tortoise pickguard but I wanted a light colored pickguard so I went with parchment since white was just too bright and it didn't fit the vintage style of the instrument at all. The color is just your common parchment that you would find to be sold by fender or other top branded companies. The quality is very good but let's be real here, it's just a pickguard so why would you pay 40 euros for a legitimate fender piece? This one cost me 10 euros and it looks AMAZING! It is shielded properly also! Anyway, it is made to fit fenders and squiers so I had to make A LOT of modifications. the bridge side had to be trimmed down with a file and sandpaper in order to fit the HB st62 along with the neck pocket side which also had to be modified with a file and sandpaper. Only one hole matched in the body so I basically had to re-drill the other 10 holes in the guitar body. The pot holes were good but the HB ST62 pots have a metal piece that goes through the pickguard so additional 3 mm holes had to be drilled for each potentiometer. I found out the hard way but if you are planning to replace the pickguard on a harley benton strat be ready to make quite a few modifications. But overall the guitar looks stunning because everything was done carefully and with patience.

You will not find this level of quality and costumer care in any other supplier! Very pleased with the result and will definitely purchase again from Thomann!
Työnjälki
5
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
D
Great
Dagur 02.02.2022
Its a great pickuard, excactly what i wanted
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
Lf
Fits Crafted in Indonesia Squier mostly ok
Leonidas from XIV 27.04.2023
Replaced the original pickguard of an 2006 Squier Standard series. Holes lined up mostly, except for slight deviations on a few screws - still managed to screw it in without re-drilling holes.

It looks very good, the only thing missing compared to the original is that while the outer screws have sink-holes, the ones for the pickups/switch don't, so you either have to do a bit of drilling or accept that the screw heads are sticking out on top of the pickguard.

Insulation is provided around the pots and the switch, not around the whole backside but this is identical to the original pickguard as well as more expensive ones like from Göldo. I used some copper tape just in case.

Color-wise it is an creamy white with a very slight green tint. Definitely not vintage mint (unfortunately can't upload a comparison photo) but quite subtle and in my opinion it looks pretty good. My pickup covers have yellowed over years and while it doesn't quite match that color, the combination still looks good.

Worth the price? For sure. If it had pre-drilled sink-holes I'd even rate it higher than the Göldo pickguards at more than double the price as they have the exact same issue.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta