the t.racks DBMeter

358

DB Meter

  • For rack mounting
  • Measures the decibel level of the sum signal
  • Produces interesting lighting in your amplifier rack
  • LED indicator changes from green to yellow
  • Sensitivity adjustment for right and left channel
  • 2 Separate LED modes: dot and bar
  • Demo mode for activating the LED without audio signal
  • High level inputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission
  • High level outputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission
  • Power consumption: 10 W
  • Dimensions (L x W x H): 483 x 44.5 x 44.5 mm
  • Weight: 0.85 kg
  • Includes power supply unit 12 V DC 500 mA
Myynnissä vuodesta Elokuu 2016
Tuotenumero 387660
Myyntierä 1 kappaletta
Cable Tester No
Level Meter Yes
Speaker Tester No
Software No
45 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Saatavilla 1-2 viikon sisällä
Saatavilla 1-2 viikon sisällä

Tuotetta saatavilla pian varastoon ja lähetykseen.

Tietoa lähetyksestä
1

358 Asiakkaiden arviot

4.2 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Ominaisuudet

Työnjälki

208 Arvostelut

A
Good for signal peak monitoring or having a visual toy
Archyx 07.12.2018
I bought this meter to monitor input signal levels while recording live sessions because my chosen audio interface lacks level controls and hardware meters on the rear inputs. This meter is fine for monitoring signal peaks to prevent clipping but don't expect to use it for anything accurate. If nothing else it'll work as blinking lights for the audience to marvel at.

The first thing I noticed after calibrating the 0 dB levels with pink noise and fiddling with the adjusters on the front was that the scale printed between the LEDs is nowhere near the truth. With the adjustments I use the scale starts at about -12 dB (where -54 dB is printed on the front) and the LED bar behaviour is linear, not logarithmic. The latter is what you'd expect in audio use.

The construction of the meter is good. The housing is metal and the connectors are screwed to the back panel to keep them from wiggling loose from the solder joints inside. The power supply provided is certified by TÜV.

Update: One star comes off from the rating as the left channel died right before a recording session when I had need for peak monitoring. The reason was that one of the XLR sockets wasn't properly seated on the circuit board before soldering and broke off the PCB traces during transit, which lead the left channel input being completely open. I could do the recording with just one channel monitored and diagnosed and repaired the meter afterwards.
Työnjälki
Ominaisuudet
0
0
Raportoi ongelmasta

Raportoi ongelmasta

M
DB Mittari
Musicmän 25.12.2021
Ostin bassolle, toimii linjassa ihan hyvin, tuo lähinnä keikka uskottavuutta räkkiin, hyvä peli, pimeässä loistaa vielä paremmin
Työnjälki
Ominaisuudet
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
l
don't buy it (or buy it instead of blank plain panel)
lukaszzz 02.01.2021
almost like the pro gear almost no one knows what it does except a small group of geeks; but with this one there is no such group; or a group of peaple fancying blinking light;
it is a waste of money; it looks good, like any other, many leds changing into the rythm, but what does it measure? no one knows; and you can't scale this thing (you have the pots but it is pointless);
but the price for the steel 1U box with a lot of leds is really good - comparable only to blank panels in price/look ratio ;)
Työnjälki
Ominaisuudet
5
6
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
R
Inaccurate.
RoadRunnersDust 06.11.2018
The scale on the front says 57dB for full-scale deflection. In reality it only takes a signal difference of about 6dB to go from nothing to all LEDs lit.

I had to build and install a calibration board inside the unit in order to make it show a true 57dB difference across the meter.

OTHERWISE, the unit is fantastic and performs its purpose brilliantly now the aforementioned issue was rectified.
Työnjälki
Ominaisuudet
7
0
Raportoi ongelmasta

Raportoi ongelmasta