Sommer Cable Quantum Highflex Multipair 2

195

High Qualiy Multicore Cable

  • High quality 2-pair multicore
  • Suitable for live and studio purposes as well as permanent installations
  • Completely torsion-free
  • Cold-resistant up to -30°
  • Pairs of wires insulated individually with rubber sheath
  • Cu-coil shielded with 99% coverage
  • Low capacitance of 45 pF cable/cable
  • 110 Ohm (AES/EBU), compliant over hundreds of metres
  • Cable cross-section: 0.14 mm²
  • Sheath: S-PVC
  • AWG - AWG26
  • Conductor insulation: Skin PE
  • Shielding: Cu coil, paired
  • Coverage: 99%
  • Temperature range: -30° to 70°
  • Sheath colour: Black, matte
  • Capacitance cable/cable at 1 m: 45 pF
  • Capacitance cable/shield at 1 m: 90 pF
  • Conductor resistance at 1 km: < 90 Ohm
  • Insulation resistance at 1 km: >1 GOhm
  • Characteristic impedance: 110 Ohm
  • Outer diameter: 8.5 mm
Myynnissä vuodesta Joulukuu 2006
Tuotenumero 108775
Myyntierä 1 juoksumetri(ä)
Number of NF-channels 2
Screened Pair Yes
Colour Black
2,60 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Määräalennus
Hinta per kappale Säästösi Summa
2,60 € 1
2,49 € 4,2% 10
2,39 € 8,1% 100
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Maanantai, 29.04. - Tiistai, 30.04.
1

195 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Työnjälki

71 Arvostelut

F
Hyvää peruskaapelia
Finlander 14.01.2019
Sommerin moniparikaapelit ovat mielestäni turhan paksuja mutta ovat sitä kautta kyllä kestäviä.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
S
Good multicore - a little overkill with 2 lines
Stephan7664 18.02.2014
This multicore cable is very flexible, has a thick, hard to cut but very soft outer jacket, and nice wires inside. It is, however a little big for a cable carrying two signals, as there are two fibre-fillers each as big as a sub-cable. The 4-pair version of this cable is just as thick. The wires besides the big outer jacket are easily stripped (I use a professional Stripax automatic wirestripper) and soldered.

My use of this cable was to connect a preamp to my DSLR Camera. The cable barely fit into a 5-pin XLR connector with the help of some tools to cut oof parts of the strain-relief inside the connector. I used an Amphenol 5 pin XLR, which is like the Neutrik XX series, but cheaper. For this cable, it was a mistake since the Amphenol's plastic for the strain relief is hard and brittle, and it was easy to break of too much. Neutricks strain relief is softer and not brittle at all, so next time I will spend the extra cash.

Mounting on the other side was using an industrial strain relief. For this cable you should use a trumpet, as the screw0type strain reliefs can create a sharp bend in this cable.
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
JS
Awesome cable!
Johan SpinOff 28.12.2019
Very good cable for on-stage use! I love to have a couple of 2-pair and 4-pair XLR cables around for feeding in-ear monitors, going from the DI's of the keyboard to the stage block, ... It drastically reduces the amount of separate cables on the stage. It just looks neater, works faster, ...

Pros: Good quality, Easy to solder

Cons (sort off...): It's rather expensive, but totally worth it!
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
B
Good for Studio Applications, Maybe not so much for Live Applications
BlackSpire 26.10.2021
I use the cable for custom length stereo audio connections in my studio.
The two cores are extremly well padded and will resist people walking over it pretty well (I still wouldn't recommend running it through a walk way).
While it might be overly thick and a bit expensive, I like buying cables that last for a life time, which this cable does so far.
Thanks to the padding, this cable will also last long in a live setup, but due to its thickness it can get cumbersome to handle at certain lengths.
Also there is something to be said for not using expensive cables in live setups, since event the best cables won't survive an idiot tying a knot in it.

Note: be careful when removing the outermost coating layer as the next layer is the individual core coating, which you don't want to cut open.
The individually coated cores are thick enough to work with the strain releave of neutrik connectors.
Työnjälki
2
0
Raportoi ongelmasta

Raportoi ongelmasta