Schaller M6 135 Locking 3L/3R CH

Aloita 360°

Näytä käännös

Machine Head Set for Electric and Western Guitar

Set configuration: 3 Left / 3 Right
Precise and wear-free
Velvet-Tex and LX6-Lube for high precision and tuning comfort
Improved manufacturing processes for very high-quality surface finish
For headstocks up to 15.4 mm thickness
Construction: Closed
Buttons: M6 Metal large
Ratio: 1:18
Shaft length: 19.5 mm
Bore: 9.8 mm
Mounting: Screw & Locknut
Screw ear: 135°
Schaller article 10020223.02.52
Surface: Chrome
Including: Fixing screws, banjo bolts and washers
Made in Germany

30 30 päivän palautusoikeus

3 3 vuoden Thomann-takuu

Myynnissä vuodesta Tammikuu 2017

Tuotenumero 405883

Myyntierä 1 kappaletta

Colour Chrome

129 €

Sis. ALV. Ei sisällä 12 € rahtikulua

Arvioitu toimituspäivä Maanantai, 29.04. - Tiistai, 30.04.

Myyntisijoitus

kategoriassa 3L/3R virityskoneistot kitaralle

Näitä ostavat asiakkaat, jotka ovat tutkineet tätä tuotetta.

43%

Ostettu

Täsmälleen tämä tuote

129 €

Ostettu

Gotoh SG381-04 MG-T Locking 3L/3R C

69 €

Ostettu

Grover 502CK Locking Rotomatics

125 €

Ostettu

Harley Benton Parts Locking Tuners 3R/3L Chr

39 €

Ostettu

Schaller M6 90 Locking 21,0 3L/3R C

129 €

70 Asiakkaiden arviot

5 60 Asiakkaat 4 6 Asiakkaat 3 3 Asiakkaat 2 1 Asiakas 1 0 Asiakkaat

4.8 / 5

Työnjälki

Arvosteluohjeet

56 Arvostelut

Laadukas virityskoneisto!

Tuntematon 07.02.2017

Korvasin näillä Gretchin alkuperäiset virittimet. Vire pitää paremmin Bigsby vibratallan kanssa ja kielten vaihto helpottui huomattavasti. Virityskoneiston vaihtoon meni noin. 10 min. Virittimien vaihto ei tehnyt kitarasta "kaulapainoista". Suosittelen.

Raportoi ongelmasta

Uskotko, että tämä arvostelu on epätarkka tai hyväksymätön jostain syystä? Ole hyvä ja kirjoita syy tekstikenttään ja – jos mahdollista – anna mukaan sähköpostiosoitteesi mahdollisia kysymyksiämme varten.

a must-buy

PalmMute 17.12.2018

I got these for my 2018 PRS SE Standard 24, they're a lifesaver. I was so fed up with my guitar going out of tune every time that I do bends. Using the tremolo wasn't even an option unless I wanted to invent a new tuning. These were easy to install and they do their job flawlessly, they hold a pitch perfect tuning even through songs with lots of big bends or lots of tremolo. Restringing is much faster and completely effortless with these. The only downside is that they are a lot shorter than the standard tuners, so some people might not like how they look, though they're long enough to not cause any problems. I personally don't mind them being shorter, I actually think they look really nice. In conclusion, I think that these are a must-buy if your guitar has trouble staying in tune, or if you just want a more convenient set of tuners.

Raportoi ongelmasta

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

I didn't enjoy fitting them, but the results made it worthwhile

røde2nowhere 16.07.2020

First, I bought these to fit on a PRS SE Tremonti Custom (2017). After reading many reports of people successfully fitting them, without issues. However, in my experience, it wasn't so straightforward. First, it required a lot of force to get the washer rings into place. And it took a lot of force to press the tuning machines in flush with the back of the headstock. In fact, I damaged the locking mechanism on one of the tuners from pushing too hard against it. Perhaps I should have removed the locking screws first. That one locking mechanism is a bit difficult to turn now, but it does work.

The new tuners weigh in at 42g heavier than the PRS SE stock tuners they replaced. And I don't notice any neck dive or any other issues.

What I do notice is that it is very easy to restring the guitar. And once the strings were stretched and tuned, the tuning is now very stable. I think the guitar was good before, but this is a nice upgrade. I don't regret getting them for this guitar, even though it was a harder job than expected.

Raportoi ongelmasta

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

Great

Stephen Watters 02.12.2017

I bought these for my PRS SE Holcomb sig. They are perfect drop in replacements. (They also fit all other SE's perfectly)

They are very easy to install, just a single screw and nut and that's it.

As you would expect with locking tuners, restringing is super quick. And the locks themselves are very secure and also don't seem to have any jagged edges that would damage or break your strings.

They are very stable when it comes to tuning. Just as good or better than Grovers. They easily beat out any stock tuner, especially with their higher gear ratio. It makes fine tuning way easier.

The posts are shorter, but more than long enough that they will still be long enough for 90% of headstocks. And they actually look really cool in my opinion being short. Has a classy look.

As for the colour, the chrome seems to be good. It doesn't blemish easily and doesn't "fade" the way some other chromes seem to, even with the most sweaty hands imaginable.

Overall they are very stable and secure, and the quality of life upgrade from restringing times being drastically shortened is great. I would and will be using Schaller locking tuners in all of my guitars in the future.

Raportoi ongelmasta

Lue kaikki arvostelut

Schaller M6 135 Locking 3L/3R CH

Machine Head Set for Electric and Western Guitar

Näitä ostavat asiakkaat, jotka ovat tutkineet tätä tuotetta.

70 Asiakkaiden arviot

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

56 Arvostelut

Liittyvät YouTubesta

Smart Navigator

Viimeksi katsotut tuotteet

Osta ja maksa turvallisesti

Etusi

Palvelu

Paras mahdollinen ostokokemus!

Schaller M6 135 Locking 3L/3R CH

Machine Head Set for Electric and Western Guitar

Näitä ostavat asiakkaat, jotka ovat tutkineet tätä tuotetta.

Lisävarusteet ja yhteensopivat tuotteet

70 Asiakkaiden arviot

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

56 Arvostelut

Liittyvät YouTubesta

Vertaile vaihtoehtoa

Smart Navigator