asiakastilille sisäänkirjautuminen
Maa ja kieli Country and Language

Neutrik MFD

354

Mounting aid

  • M3 Thread for quick and easy installation of all D-Norm mounting sockets
Component type Cover
Tuotenumero 212960
0,50 €
Sisältää ALV:n. Ei sisällä 12 € toimituskuluja
Määräalennus
Hinta per kappale Säästösi Summa
0,50 € 1
0,47 € 6,0% 10
0,44 € 12,0% 50
Samantien saatavilla
Samantien saatavilla

Tämä tuote on varastossa ja voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Maanantai, 1.11. - Tiistai, 2.11.
1
1 Myyntisijoitus

354 Asiakkaiden arvostelut

5 324 Asiakkaat
4 21 Asiakkaat
3 7 Asiakkaat
2 0 Asiakkaat
1 2 Asiakkaat
4.9 / 5

Työnjälki

V
Must have for D-type connectors.
Vesurihiippari 28.04.2020
Didn't know first that these existed and mounted my D-type XLR, jacks, USB, ethernet... -connectors with nuts and it was a hassle. These snap on the connector and stay put while you drive the bolts in. These make installation a breeze and I recommend some threadlocker (eg. Blue Loctite) for more permanent installations. Tip: get some M3 hex-bolts or torx for easier installation using cordless driver. Philips/pozidrive is ok, but heads will strip easily especially on these small bolts. Also hex or torx gives a nice finished look.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

F
Works well!
Finlander 21.01.2018
If you don?t want to buy or use M3 nuts with your D-type connectors, this is the solution. Looks good too (if you see back of your rack.).
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

AS
Tekee sen mitä pitää
Antti Schroderus 29.05.2018
Toimii d-liittimien kiinnitykseen paneeliin oivasti, minkä tuote lupaakin.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
k
Neutrik makes good stuff
kxszander 05.02.2020
I bought about 20 of these when I decided to make my own patchbays both for live rig and for my studio setup.

Does precisely what it needs to do; use M3 rack screws to fit a 19"-rack backplate with the powercon or XLR-plugs of your choice, fit with optional multicolor Neutrik labeling sheets, and color-coordinate those with optional coding rings for your Neutrik plugs. Pristine rigs for the win!

These are a bit pricy for what it is – and for my personal taste. Color labels, coding rings, adapters set me quite a bit of money. But I don't think there is an equally effective alternative out there, so this is THE way to go.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

Neuvonta